| S.No |
From |
To |
Role |
Funding Agency |
Funding (Lakhs) |
Project Title |
| 27 |
2026 |
2028 |
PI |
ISRO |
24.79 |
Hydraulic and tribological characterization of additive manufactured fluid components based on experimental studies and optimization of process parameter for LPREs |
| 26 |
2025 |
2027 |
PI |
DRDO |
275.89 |
Enhancement of fatigue resistance of Titanium based alloys of Aero-Engine components through high energy electromagnetic pulses |
| 25 |
2023 |
2026 |
PI |
DST |
45.87 |
Improvement of thermo-mechanical properties of aero-turbine blades through 3D printed auxetic structures |
| 24 |
2022 |
2026 |
PI |
DRDO |
225.44 |
Design and development of Robotic based Continuous Fiber Additive Manufacturing system |
| 23 |
2022 |
2025 |
Co-PI |
SERB, DST |
30.36 |
Development of metal 3D printed lightweight flywheel and novel control algorithm for micro-grid energy storage applications |
| 22 |
2019 |
2022 |
PI |
GTRE |
22.74 |
Laser micro-cladding of titanium and nickel-based turbine shafts |
| 21 |
2020 |
2021 |
Co-PI |
BHEL |
15.37 |
Development of equal area-based grid measurement for alternate self-averaged cylindrical pitot air flow measuring device |
| 20 |
2020 |
2021 |
PI |
BHEL |
22.39 |
Structural weight optimization of monocoque structured E-Bus |
| 19 |
2019 |
2020 |
Co-PI |
BHEL |
24.42 |
Study and establishing the design guidelines for the real time CAN communication for BHEL E-Bus |
| 18 |
2018 |
2021 |
Co-PI |
GTRE |
98.60 |
In-depth investigations on corrosion and tribological studies on expendable engine |
| 17 |
2018 |
2019 |
PI |
BHEL |
34.40 |
3D Modeling and Engineering design validation of 12-meter E-bus |
| 16 |
2018 |
2019 |
PI |
BHEL |
9.60 |
Design of thermal performance evaluation system with charging-discharging circuit for Li-Ion Battery for E-vehicle |
| 15 |
2018 |
2020 |
Co-PI |
BHEL |
21.84 |
Establishment of Nano/cost effective insulation coating for high temperature application to reduce insulation thickness |
| 14 |
2018 |
2019 |
Co-PI |
BHEL |
17.50 |
Design modification of equal area grid measurement for alternate square pitot air flow measuring device |
| 13 |
2018 |
2019 |
Co-PI |
BHEL |
21.65 |
Evaluating criteria for battery condition assessment |
| 12 |
2016 |
2018 |
PI |
GTRE |
9.60 |
Hot air erosion studies on nickel based super alloy turbine blades and suitable surface treatment for erosion prevention for Aero Engine application |
| 11 |
2016 |
2017 |
Co-PI |
GTRE |
9.40 |
Exploratory studies on abrasive jet machining of superalloys |
| 10 |
2016 |
2017 |
PI |
GTRE |
9.60 |
Exploratory Studies on Laser surface patterning for providing high temperature protective coatings on Nickel based superalloy |
| 9 |
2016 |
2017 |
PI |
BHEL |
17.20 |
Development of Thermal Interface Material (TIM) for Thermoelectric Generator (TEG) |
| 8 |
2015 |
2016 |
PI |
BHEL |
8.01 |
Development of modified surface for ID fan blades to improve their service life |
| 7 |
2014 |
2015 |
Co-PI |
GTRE |
9.90 |
Investigation on the properties of direct metal laser fabricated material and its brazing compatibility with nickel-based casing |
| 6 |
2013 |
2015 |
PI |
GTRE |
49.95 |
Structural Integrity Evaluation Studies on High Speed Transmission Shaft for Turbofan Engine Application |
| 5 |
2013 |
2015 |
PI |
DRDL |
9.90 |
Thermal barrier coatings on high temperature Aero Engine Components |
| 4 |
2013 |
2014 |
PI |
GTRE |
9.90 |
Exploratory Studies on Localized Repair of Aero Engine Blade by Welding Techniques |
| 3 |
2011 |
2014 |
PI |
CSIR |
14.00 |
Electrical Discharge Alloying of Ni-WC metal matrix composite on D-53 die steel for improved wear resistance |
| 2 |
2010 |
2012 |
Co-PI |
BHEL |
13.50 |
Experimental Investigations on the performance of nano composite surface coatings for boiler applications |
| 1 |
2008 |
2011 |
PI |
DST |
18.90 |
Improvement of wear resistance of Ti-alloy disc brake rotor through laser surface melting |
