77. P.Chandrasekar, S.Natarajan, K.R.Ramkumar (2019) Influence of carbide reinforcements on accumulative roll bonded Al 8011 composites, Materials and Manufacturing Processes. (Paper accepted)
76. E. Edward Anand, S. Natarajan, High-temperature erosion behaviour of plasma-sprayed NiCrBSi–graphite coatings, Surface Engineering, 2018, VOL. 34, NO. 10, 783–790
75. Ramkumar, K. R.; Natarajan, S. Investigations on Microstructure and Mechanical properties of TiO2 Nanoparticles addition in Al 3003 alloy joints by Gas Tungsten Arc Welding. Material Science and Engineering A 2018, 727, 51–60
74. B.K. Narayanan, M. Duraiselvam, S. Natarajan and M. A. KHAN, Hot Corrosion and Oxidation Behaviour of a Laser Processed Nickel-based Superalloy, Int. Journ. of Lasers in Eng., Vol. 0, pp. 1–18.
73. S. Karuppasamy, V. Sivan, S. Natarajan, S. P. KumareshBabu, M. Duraiselvam, R. Dhanuskodi, Establishment of Wear Resistant HVOF Coatings for 50CrMo4 Chromium Molybdenum Alloy Steel as an Alternative for Hard Chrome Plating, J. Inst. Eng. India Ser. C, https://doi.org/10.1007/s40032-018-0459-1.
72. G. Nageswaran, S. Natarajan, K.R. Ramkumar, Synthesis, structural characterization, mechanical and wear behavior of Cu-TiO2-Gr hybrid composite through stir casting technique, Journal of Alloys and Compounds, 768 (2018) 733-741.
71. Ramkumar, K. R.; Natarajan, S.; Optimisation of GTAW Al 3003 weld using fabricated nanocomposite filler metal, Materials and Manufacturing Processes, 2018, Pg: 1-10, DOI:10.1080/10426914.2018.1532585
70. K. Anil Kumar, S. Natarajan, MuthukannanDuraiselvam, S. Ramachandra, Synthesis, Characterization and Mechanical Behaviour of Al 3003 - TiO2 Surface Composites through Friction Stir Processing, Materials and Manufacturing Processes, DOI: 10.1080/10426914.2018.1544711.
69. A.Vijayanand, S. Natarajan, K.R. Ramkumar, S. Sundararajan, Optimization and Dry Sliding Wear Behaviour of Spray Coated MoS2 on Automotive Ball Joints through Response Surface Methodology, Materials Research Express, Vol.6, No.6, 2019, IOP Publishing.
68. R. Mahendran ,S. P. KumareshBabu, S. Natarajan, S. Manivannan, A. Vallimanalan, Phase transformation and crystal growth behavior of 8mol% (SmO1.5, GdO1.5, and YO1.5) stabilized ZrO2 powders, International Journal of Minerals, Metallurgy, and Materials, July 2017, Volume 24, Issue 7, pp 842–849
67. R Mahendran, SP KumareshBabu, S Natarajan, A Vallimanalan, S Manivannan, Thermal kinetics and phase stability of 8 mol% samaria doped zirconia nanopowders prepared via reverse co precipitation,Ceramics International, Volume 43, Issue 11, 1 August 2017, Pages 8051-8056.
66. Balamurali Krishnan Narayanan, MuthukannanDuraiselvam, S Natarajan&MuhammedAnaz Khan (2017) Laser material processing of nickel super alloy for improved erosion resistance, Materials and Manufacturing Processes, 32:14, 1596-1605, DOI:10.1080/10426914.2017.1339312.
65. V. Dillibabu, Muthukannanduraiselvam, S Natarajan, U Chandrashekar ,High Temperature Tribological Characterisation of Laser Nitrided Nickel-Based Superalloy, Transactions of the Indian Institute of Metals · May 2017. DOI: 10.1007/s12666-017-1139-1
64. S.Natarajan, Biomimetic, Bioresponsive and Bioactive Materials – Book Review, Materials and Manufacturing Processes, Taylor & Francis, DoI: 10.1080 / 10426914.2015. 1059095
63. S.Natarajan, Introduction to industrial polypropylene– Book Review, Properties, Catalysts & Processes, Materials and manufacturing Processes, Volume (No.) 31:3 ,379-380, 2016
62. S.Natarajan, What is What in the Nano world – Book Review, Materials and Manufacturing Processes, Volume (No.), 31:12 ,1643-1643,2016
61. S.Natarajan, Glass-Ceramic Technology– Book Review ,Materials and Manufacturing Processes, Volume (No.), 31:4 , 550-551,2016
60. S.Natarajan, Nanotechnology for the Energy Challenge– Book Review ,Materials and Manufacturing Processes, Volume (No.), 31:4 , 1935-1939, 2016
59. K.G.Thirugnanasambantham&S.Natarajan, Degradation Through Erosion: Mechanistic Studies on IN 718 Superalloy under Hot Air Jet Conditions, Journal of Materials Engineering and Performance, ASM International, Vol: 24(7), July 2015 – 2605.
58. R. Sankaran, D.Rajamani, S.Natarajan&K.G.Thirugnanasambantham, Sliding wear behaviour and its mechanisms of carbonitrided AISI 8620 steel at 100°C under unlubricatedconditions,Surface Engineering, Maney Publications,DOI:10.1179/1743294415Y.0000000090Online: March2, 2016
57. M. Kumarasamy&S.Natarajan,Selection and characterisation of HVOF cermet coatings for volutes of high capacity pumps of opencast lignite mines,Surface Engineering, ManeyPublications,Volume 32, Issue 3, 2016, pp: 229-237.
56. E. Edward Anand&S. Natarajan, Strengthening Mechanisms in Multiwalled Carbon Nanotubes Reinforced Co–W Pulse Electrodeposited Coatings, Materials and Manufacturing Processes, Taylor & Francis, Volume 31, Issue 1, Jan 2016, pp: 48-52.
55. Akhilesh K., AnanyaRajagopal, PreethiNambiyar, S.Natarajan, E.EdwardAnand, Effect of graphite addition on the Microstructure, Hardness and Abrasive Wear behavior of Plasma sprayed NiCrBSi coatings, Materials Chemistry and Physics, Elsevier, 10.1016/j.matchemphys.2016.02.076
54. S.Natarajan, Thermochemical Surface Engineering of Steels – Book Review, Surface Engineering, Maney Publications, Vol: 31(11), 2015, pp: 875-878
53. M. Kumarasamy ,S. Natarajan, Selection and characterisation of HVOF cermet coatings for volutes of high capacity pumps of opencast lignite mines, Surface Engineering Maney Publishing UK, DOI: http://dx.doi.org/10.1179/1743294415Y.0000000015
52. E. Edward Anand ,S. Natarajan, Strengthening Mechanisms in Multiwalled Carbon Nanotubes Reinforced Co-W Pulse Electrodeposited Coatings, Materials and Manufacturing ProcessesTaylor&Francis,UK., DOI: 10.1080/10426914.2015.1004697
51. E. Edward Anand ,S. Natarajan, Effect of Carbon Nanotubes on Corrosion and Tribological Properties of Pulse-Electrodeposited Co-W Composite Coatings, Journal of Materials Engineering and Performance ASM International,USA. January 2015, Volume 24, Issue 1, pp 128-135
50. K.G.Thirugnanasambantham,S. Natarajan, Degradation mechanism for high temperature erosion in surface modified IN718 superalloy, Surface Engineering Maney Publishing UK, Volume: 31, Issue: 1, Jan 2015, pp. 24 – 28
49. M. Adam Khan .S. Sundarrajan .S. Natarajan, Hot corrosion behaviour of Inconel 617 in mixed salt environment at 900 and 1000°C for gas turbine applications, High Temperature Materials and Processes DE GRUYTER GERMANY, DOI: 10.1515/htmp-2014-0054, June 2014.
48. E. E. Anand, S. Natarajan, Preparation and characterisation of nano crystalline cobalt–phosphorus coatings reinforced with carbon nanotubes, Surface Engineering Maney Publishing, UK. 2014;30(10),716-721
47. M. Adam Khan ,S. Sundarrajan ,S. Natarajan, Influence of plasma coatings on Inconel 617 for gas turbine applications, Surface EngineeringManey Publishing, UK. 2014;30(9),656-661
46. M. Adam Khan ,S. Sundarrajan ,S. Natarajan ,P. Parameswaran ,E. Mohandas, Oxidation and Hot Corrosion Behavior of Nickel-Based Superalloy for Gas Turbine Applications, Materials and Manufacturing Processes
Taylor and Francis, UK. 2014;22(9),29, 832-839.
45. J. Yogananth ,S. Natarajan ,S. P .KumareshBabu, Erosion Wear Characteistics of Surface Modified Grey Cast Iron by WC-Co-Cr/NiCrBSi coating using HVOF Thermal Spray Processes, Materials Performance and CharacterizationASTM international USA,2014;3(1),309-326.
44. B.ThirumaranS.NatarajanS.P.KumareshBabu, “CNT reinforced Corrosion behavior of AA7075 Nanocomposites”, Advances in Materials Science PG Publications 2(1) 1-5 2013
43. J.YogananthS.NatarajanS.P.KumareshBabu, “Erosion Behaviour of WC–Co–Cr Thermal Spray Coated Grey Cast Iron under Mining Environment”, Transactions of Indian Institute of Metals,
66(4), 437- 443, 2013
42. J.YogananthS.NatarajanS.P.KumareshBabu, “Erosive Wear Behavior Of Nickel Based High Alloy White Cast Iron Under Mining Conditions Using Orthogonal Array”, International Journal of Materials Engineering and Performance (ASM), 22(9) 2534-2541 2013.
41. J. Yoganandh, T. Kannan, S.P.KumareshBabu, S. Natarajan, “Optimization of GMAW Process Parameters in Austenitic Stainless Steel Cladding Using Genetic Algorithm Based Computational Models” Experimental Techniques, Wiley publications, DOI: 10.1111/j.177-567.2011.00803.x, 2012
40. M.Kumarasamy, S.Natarajan, S.P.Kumareshbabu, S.Santhanam, P.Veerabalu, S.Chokkuvel-Murugan, “Assessment of failure modes of components in high capacity pumps due to synergistic effects of Erosion and Corrosion –A case study in Lignite Mines” Key Engineering Materials, Trans Tech Publishing, 710 689 2012
39. N.Mohan, S.Natarajan,andS.P.KumareshBabu, “Sliding Wear Behavior of Graphite filled Glass-Epoxy Composited at Elevated Temperatures”, Jr of Polymer-Plastics Technology and Engineering, 50 251 – 259 2011
38. N.Mohan, S.Natarajan, S.P.KumareshBabu, “Abrasive wear behavior of hard powders filled glass fabric-epoxy hybrid composites”, Materials and Design, 32 1704 – 1709 2011
37. P.R.S. Kumar, S.Kumaran, T.SrinivasaRao, S.Natarajan,”High temperature sliding wear behavior of press-extruded AA6061/fly ash composite”, Materials science and Engineering A, 527 1501 – 1509 2011
36. N.Mohan, S.Natarajan, S.P.KumareshBabu, Siddaramaiah, “Investigation on sliding Wear Behaviour and Mechanical Properties of Jatropha Oil Cake-filled Glass- Epoxy Composites”,
Journal of American and Oil and chemical society, 88 111 – 117 2011
35. N.Mohan, S.NatarajanS.P.KumareshBabu, Siddaramaiah, “Investigation on Two-Body Abrasive Wear Behavior of Silicon Carbide filled Glass Fabric-Epoxy Composites”, Journal of Minerals & Materials Characterization & Engineering , 9 (3) 231 – 246 2011
34. N.Mohan, S.Natarajan, S.P.KumareshBabu, Siddaramaiah, JoongHee Lee, “Solid particle erosion of UHMWPE aramid fabric-epoxy hybrid composites” Advanced Materials research (Trans Tech Publications, Switzerland), 123 – 125 1051 – 1054 2011
33. Z.Edward Kennedy, S.Natarajan , “Abrasive wear behavior of rotary tiller blades used in farming application” International Journal of Materials Science, (6) 3 263 – 277 2011
32. P.R.S. Kumar, S. Kumaran, T. SrinivasaRao, S. Natarajan, “High Temperature Sliding Wear Behavior of Press-Extruded AA6061 / Fly Ash composite”, Materials Science and Engineering A
(Elsevier Publishers) 527 1501 – 1509 2010
31. S.Jerome, B.Ravisankar, Pranab Kumar Mahato, S.Natarajan, “Synthesis and evaluation of mechanical and high temperature tribological properties of in-situ al-TiC composites”, Tribology International (Elsevier Publishers) 43 2029 – 2036 2010
30. Mamthakumari, Alphonsa, S .Natarajan, “Dry sliding wear behavior of plasma nitro-carburised AISI 304 stainless steel using response surface methodology”, Institute of Materials, Minerals and Mining, 26 (3) 191 – 198 2010
29. M. Prince, P. Gopalakrishnan, M.Duraiselvam, S. Natarajan,”Dry Sliding Wear Behavior of HVOF Sprayed Molybdenum and Nickel/Chromium Coatings”, International Journal of Applied Engineering Research, (5) 75 – 86 2010
28. N.Mohan, S.Natarajan, S.P.KumareshBabu, “Studies on Two-body Abrasive Wear Behavior of Graphite Filled glass Fabric –Epoxy composites” International Journal of Materials Science, 5 (2) 181 – 196 2010
27. M.MamathaKumari, S.Natarajan, J.Alphonsa and S.Mukherjee ,”Dry Sliding wear behavior of plasma nitrocarburised AIS 304 stainless steel using response surface methodology”,
Surface Engineering (Maney Publishers) 2010, 20(3) 191 – 198 2010
26. S.P.KumareshBabuS.Natarajan, “High temperature corrosion and characterization studies in flux cored arc welded 2.25Cr-1Mo power plant steel” Jr of Materials Engineering and Performance, ASM Int(Springer Publishers) 2010, 19 743 – 750 2010
25. G. Naveen Kumar, R. Narayanasamy, S. Natarajan, S.P.KumareshBabu, “Dry sliding wear behaviour of AA 6351-ZrB2 in situ composite at room temperature” Materials and Design (Elsevier Publishers)
2010, 31(3) 1526 – 1532 2010
24. Z.E.Kennedy, S.Natarajan, “Slurry erosion properties of detonation sprayed and plasma sprayed coatings for materials used in mining environments” Surface Engineering (Maney Publishers)
25 (6) 476 – 481 2009
23. S.Natarajan, R.NarayanasamyS.P.KumareshBabu, G.Dinesh, B.Anil Kumar, K.Siva Prasad, “Sliding Wear Behaviour of Al 6063/TiB2 in situ composites at elevated temperatures”, Materials and Design (Elsevier Publishers) 30 (7) 2521 – 2531 2009
22. Anoop, S. S.Natarajan, S.P.KumareshBabu, “Analysis of factors influencing dry sliding wear behaviour of Al/SiCp-Brake pad tribo-system”, Materials and Design (Elsevier Publishers) 30 3831 – 3838 2009
21. S.SenthilKumaranS.P.KumareshBabu, K.Sivaprasad, S.Natarajan, “High temperature wear behavior of Al-4032-ZrB2 in situ composite”, International Journal of Materials Science 4(3) 283 – 298 2009
20. Prince M Gopalakrishnan P M.DuraiselvamSatish D, Naveen Natarajan S, “Study of Dry Sliding Wear of Plasma Sprayed Mo-Ni/Cr - Ti-6Al-4V Tribo Pair” European Journal of Scientific Research, EuroJournals Publishing, Inc. 37(1) 41-48 2009
19. S.P.KumareshBabu, S.Natarajan, “Influence of heat input on high temperature weldment corrosion in submerged arc welded power plant carbon steel”, IntJr of Materials and Design (Elsevier) 29 1036-1042 2008
18. K.Sivaprasad, S.P.KumareshBabu, S.Natarajan, R.Narayanasamy, B.Anil Kumar, “Study on Abrasive and Erosive Wear Behaviour of Al 6063/TiB2 in situ Composites”, Materials Science and Engineering A (Elsevier) 498 495-500 2008
17. S.P.KumareshBabu, S.Natarajan, “Corrosion Behavior of Pulsed Gas Tungsten Arc Weldments in Power Plant Carbon Steel” Jr. of Materials Engg. and Performance (ASM-Intl) 16(5) 620-625 2007
16. S.Natarajan, S.P.Kumareshbabu, M.Ramesh, ”Corrosion behaviour of gas tungsten arc welded 9Cr-1Mo power plant steel” IWS journal 44-49 2007
15. S.P.KumareshBabu, S.Natarajan, “Corrosion behavior of flux cored arc weldments in carbon steel used in power plants” Jrl. of Steel and related materials (4)3 207 – 211 2006
14. S.Natarajan, S.P.KumareshBabu, “Corrosion and its Inhibition in SA213-T22 TIG Weldments used in Power Plants under Neutral and Alkaline Environments” Materials Science &Engg. A 432 47-51 2006
13. S.Natarajan, V.Ravikiran, “Evaluation of Electrochemical and Surface characteristics of conversion coatings on ZM21 Magnesium Alloy” Jrl of Surface Engineering 22 (4) 1 -7 2006
12. S.P.KumareshBabu, S.Natarajan, “Influence of heat input on flux cored arc welded power plant carbon steel” Int. Jrl of joining of Materials 18(1) 19 -26 2006
11. S.Natarajan, “Corrosion behaviour of GMA weldments in 1Cr-0.5Mo power plant steel” Australasian Welding Journal 50 33 -39 2005
10.S.Natarajan, V.Sivan, P.Gerald Tennyson, V.Ravikiran, “Protective coatings on magnesium and its alloys- a critical review” Jrl. of Corrosion prevention and control 51(4) 142 – 163 2004
9.Istiaq Ahmed, S.Natarajan, V.Sivan, R.Vaideeswaran, “General corrosion and stress corrosion behaviour of freely corroding and active passive materials used in power and petrochemical plants”, Jrl. of Steel and related materials 5 5399 2004
8. P.Gerald Tennyson, S.Natarajan, V.Sivan, “Influence of anodizing and conversion coatings on ZM21 magnesium alloy towards its surface characteristics and electrochemical properties” Jrl. of Steel and related materials 5 5398
7. F.GinoPrakash, S.Natarajan, R.Vaideeswaran, “Weldment corrosion and its inhibition in power plant materials under neutral and alkaline environment” Jrl of steel and related materials 2 (1) 151 2004
6. M.K.Karthikeyan, S.Natarajan, R.vaideeswaran, “Weldment, corrosion and its control in active-passive materials used in power, process and petrochemical industries”Journal of steel and related materials 2 (2) 78 2004
5. P.J.Antony, S.Natarajan, R.Vaideeswaran, “Corrosion and its inhibition in Induction pressure weldments in carbon steel used in power plants” Journal of corrosion prevention and control 51(40 181 – 187 2003
4. S.Natarajan, V.Sivan, “High temperature corrosion and its inhibition in carbon steel fusion weldments used in power and process plants” Journal of joining of Materials 15 (3) 17 – 24 2003
3. R.Vaideeswaran, S.Natarajan, V.Sivan, “The corrosion behaviour of Incoloy 825 weldments used in the process and petrochemical industries” Journal of corrosion prevention and control 50 (2) 64-70 2003
2. S.Natarajan, V.Sivan, “Weldment corrosion and its inhibition in power – generating components”
Journal of Corrosion prevention and control, 50(1) 7 -19 2003
1.P.J.Antony, S.Natarajan, R.Vaideeswaran, “Corrosion and its inhibition in carbon steel flash butt resistance weldments used in power plants” Journal of Steel and Related Materials (1) 77-78 2003
20. Adam Khan M, Sundarrajan S, Natarajan S, “Evaluation of thermal barrier coatings on Inconel 617 for gas turbine applications”, Seventeenth National Congress on Corrosion Control Corrosion and surface Engg. CSIR 2014
19. Edward Anand, E S. Natarajan, “Effect of Carbon Nanotubes Addition on the Corrosion Behavior of Pulse Electrodeposited NanocrystallineCoW Coatings” International Conference on Electrochemical Science & Technology (CONEST – 2014) Corrosion and surface Engg Bangalore 2014
18. Adam Khan M, Sundarrajan S, Natarajan S, “Assessment on plasma coatings towards hot corrosion behavior of Inconel 617 through factorial design for gas turbine applications”, International Conference on Electrochemical Science & Technology (ICONEST – 2014), CECRI, Karaikudiorganised by National Corrosion Council of India, Karaikudi, Corrosion and surface EnggIISc, 2013
17. M. Adam Khan, S.Sundarrajan, S.Natarajan, P.Parameswaran, E.Mohandas, “Oxidation and hot corrosion behaviourof Inconel 617 at 900° and 1000°C A National Symposium on Electrochemical Science and Technology NSEST2013 Corrosion and surface EnggIISc 2013.
16. Yoganandh, J, S. Natarajan, S.P.KumareshBabu “Erosion Wear Characteristics of Duplex Stainless Steel Under Mining Conditions” National Symposium on Electrochemical Science & Technology Corrosion and surface Engg. IISc 2013
15. Yoganandh, J., S. Natarajan, S.P.KumareshBabu, “Erosion Behaviour of High Chromium Iron Under Mining Conditions Using Orthogonal Array” National Conference on “Corrosion, Surface Engineering and Tribology (Best Paper Award in the Tribology Session)” Corrosion and surface Engg NITT 2013.
14. Yoganandh, J.,S. Natarajan, S.P.KumareshBabu, “Erosion Behaviour of WC–Co–Cr Thermal Spray Coated Grey Cast Iron under Mining Environment”, International Symposium for Research Scholars on Metallurgy, Material Science &Engg. Corrosion and surface Engg IITM 2012.
13. Yoganandh, J., M.Saravanakumar, S.Natarajan, S.P.KumareshBabu, and A.Sreekanth, “Erosion Behaviour of Thermal Spray Coated FG 260 Cast Iron and its Surface Characterization by Spectroscopic Techniques” XXVI International Conference on Surface Modification Technologies’ (SMT 26) Corrosion and surface Engg. EcoleCentrale de Lyon (ECL)France 2012
12. Thirumaran B, Natarajan S, Synthesis, KumareshBabu S.P “Characterization and Corrosion behavior of CNT reinforced AA7075 composite”, XXVI International Conference on Surface Modification Technologies’ (SMT 26) Corrosion and surface Engg. EcoleCentralede Lyon (ECL)France 2012
11. Kumarasamy M, Natarajan S, KumareshBabu.S.PSanthanam S, Veerabalu P, ChokkuVelmurugan S, “A Case Study on Design and Evaluation of Performance of HVOF Coatings for Prevention of Pitting and Erosion Corrosion in High Capacity Pumps of Opencast Lignite Mines”, XXVI International Conference on Surface Modification Technologies’ (SMT 26) Corrosion and surface Engg. EcoleCentrale de Lyon (ECL)France 2012
10. Thirumaran B, Natarajan S, KumareshBabu S.P, “Synthesis, Characterization and Wear behavior of CNT reinforced AA7075 composite”, 1st International Conference on Functional Materials or Defence ICFMD 2012, DIAT Corrosion and surface Engg. Pune 2012
9. Kumarasamy M, Natarajan S, KumareshBabu.S.P, Santhanam S, Veerabalu P, ChokkuVelmurugan S “Assessment of failure modes of components in high capacity pumps due to synergistic effects of Erosion and Corrosion –A case study in Lignite Mines International Conference on Advances in Metallic Materials and Manufacturing process for Strategic Sectors Corrosion and surface Engg Trivandrum 2012.
8. Mohan, N., S. Natarajan, S.P.KumareshBabuSiddaramaiah, “Abrasive wear behavior of tantalum niobium carbide filler filled glass fabric reinforced epoxy composites Second International Conference on Polymer Processing and Characterization Corrosion and surface Engg. Kottayam2010
7. Mohan, N., S. Natarajan, S.P.KumareshBabuSiddaramaiah, “Sliding wear behavior of Tungsten Carbide filled Glass – Epoxy composites at elevated temperatures” International Symposium for Research Scholar on Metallurgy, Materials Science and Engineering, (ISRS) Corrosion and surface Engg. Chennai IITM, 2010
6. Mohan, N., S. Natarajan, S.P.KumareshBabu, “Solid Investigation on Two-body abrasive wearbehavior of Tantalum Niobium Filled Glass – Epoxy Composites”International Conference in Recent Trends in Materials Science & Technology Corrosion and surface EnggTiruvananthapuram 2010.
5. Mohan, N., S. Natarajan, S.P.KumareshBabuSiddaramaiah, Jong HeeLee, “Solid Particle erosion of UHMWPE filled Aramid Fabric Epoxy Hybrid Composites” International Conference on Multifunctional Materials and Structures (MFMS) Corrosion and surface Engg. Korea 2010.
4. Mohan, N., S. Natarajan, S.P.KumareshBabuSiddaramaiah, “Influence of Jathropha press cake filler in glass fabric – epoxy composites on slidingwear behavior”, International Conference on Recent Trends in Materials and Characterization Corrosion and surface EnggNITK 2010.
3. Mohan, N., S. Natarajan, S.P.KumareshBabu, “Dry – Sliding wearbehavior of UHMWPE filled Aramid – Epoxy Composites InternationalConference on Nano –Composites Corrosion and surface Engg. kotayam 2010.
2. Mohan, N., S. Natarajan, S.P.KumareshBabu, “Effect of Jatropha oil cake on Erosive wear of E-Glass Fabric Reinforced Epoxy Composite Materials”, International Conference on Nano – Composites Corrosion and surface Engg. kotayam 2010.
1. Mohan, N., S. Natarajan, S.P.KumareshBabuSiddaramaiah, “Evaluation of thermal barrier coatings on Inconel 617 for gas turbine applications” International conference on Total Engineering Received Best Technical Paper Award at TEAM TEACH Analysis and Manufacturing Technology – 09 Bangalore 2009.
