Research Guidance

Number of PhDs guided

 

Name of the PhD Scholar

Title of PhD Thesis

Role(Supervisor/ Co-Supervisor)

Year of Award

P. Dinesh Babu

Experimental Studies and Numerical Simulation of Laser Transformation Hardening of Low Alloy Steel

 

Guide

2013

T. Suthakar

Experimental Investigation and Numerical Analysis of Laser Beam Welding of Austenitic Stainless Steel

Co-guide

2013

Nanda Naik Korra

Optimization and Characterization Studies on Activated Tungsten Inert Gas (A-TIG) Welded Duplex Stainless Steel 2205 and Super Duplex Stainless Steel 2507 Alloys

Guide

2016

K. C. Ganesh

Numerical Modelling and Experimental investigation on TIG and Activated TIG Welding of Austenitic Stainless Steel

Guide

2016

R. Ajith Krishnan.

Experimental Investigation on the Effect of Gravitational Orientation on Flow Boiling Performance in Different Configurations of Micro/mini Channels

Guide

2019

K. Premkumar

Experimental Investigation on Oxidation, Erosion and Hot Corrosion Behaviour of HVOF Coating

Guide

2020

G. Sankar

Numerical and experimental investigations of the performance of tangentially fired utility boiler furnace firing high ash Indian coal

Guide

2020

M. Senthil kumar

Experimental Investigation on Thermal Management of Phase Change Material based Solar Photovoltaic Passive Cooling

Guide

2021

R. Shankar

Studies On The Development Of Nanostructured Thermal Spray Coating For High Temperature Applications

Guide

2022

Jinshah B S

Performance investigation of an natural circulation loop based dual mode parabolic through collector for low temperature and saturated steam applications

Thesis Submitted

2022

 

M.S. Guidance

Sl. No

Thesis Title

Name

Year of Award

As Guide/co-guide

  1.  

Investigations On Prediction Of Local Heat Flux On Membrane Water-Wall Tubes Of Sub-Critical Boiler

G. Sankar

2016

Guide

        2.

 

Studies on performance of utility boiler with variation in ash content of coal

Harikrishnan S. Pillai

 

2016

 

Guide

 

3. An experimental Study on the Thermal Management of Concentrated Photovoltaic Cell using Passive Techniques Anand S 2019 Guide

       4.

Behaviour Based Safety Approach to Improve Workplace Safety”–A comparative study of Heavy Manufacturing Industry and Multi-storey Building Construction

D. Dinagaran

2020

Guide

        5.

Postural Discomfort Analysis among EOT Crane Operators and Tube Edge Preparation Workers of Heavy Engineering Industry

R Anandakumar

2020

Guide

PG DISSERTATIONS

Title

Student name

Year

Ergonomic assessment in the heavy equipment manufacturing industry to reduce musculoskeletal disorders

Deepmala kumari

2021

Treatment of wastewater containing phenol by liquid-liquid extraction

Deepmala kumari

2021

Machine learning approach to predict thermophysical properties of nanoencapsulated PCM

Vipul Atmaram Dhotre

2021

Synthesis and comparative study of SiO2 and TiO2 shell based nanoencapsulation of binary eutectic PCM

Vipul Atmaram Dhotre

2021

Kinetic performance of bio-char based form-stable PCM for medium temperature range applications

Jatoth Mahesh

2021

Synthesis and Characterization of Form stable Bio-based composite PCM material

Jatoth Mahesh

2021

Numerical investigation of melting behavior of phase change material dispersed with nano-particles in Concentric pipes

Akula Sai Sankar

2020

Characterization of a novel composite PCM for building applications

Akula Sai Sankar

2020

Numerical investigation of hypersonic flow passed different after body configuration

Bhukya Koteswararao Naik

2020

Dynamically simplified temperature Transforming model for low temperature composite PCM slab

Bhukya Koteswararao Naik

2020

Experimental analysis of insole material in safety shoe and the effect of different insole material in the ground reaction force during material handling

Anuradha Mishra

2019

Prediction of incident energy released during ARC flash in industries using MATLAB

Anuradha Mishra

2019

 Identification of biomechanical risk factors followed by postural analysis among construction workers

 

C NIKITHA

2019

Characterisation and thermal stability analysis of novel form stable composite PCM for solar photovoltaic applications

Sahith G

2019

Ergonomic study, analysis and process improvement of manual handling workers on LPG gas cylinder

Mukilvanan M

2019

 Dynamic Analysis of Flat Plate Loop Heat Pipe (Phase-I Development of Non-Isothermal Incompressible Two-Phase Solver)

 

Saurabh Prajapati

2018

Hand-arm vibration transmission analysis of angle grinder using accelerometer

Jivesh Kumar

2018

 Experimental analysis of PCM Integrated –Circular Natural Circulation Loop

 

Abin francis

2018

 PCM Integrated - Solar Thermal Collector for Direct Steam Generation (Phase-I Development of Solver for Solid-to-Solid PCM)

 

Abin francis

2018

Evaluation Of the Effect of Floor Mats and Shoe In-Soles on Standing Posture

Pankaj Panwar

2017

Analysis Of Force on The Hands of Workers While Operating Hand Drilling Machine

Pankaj Panwar

2017

Study On Effect of Variation in Welding Position During Overhead Welding

Bibhor Kumar Vibhuti

2017

Incident Data Analysis and Risk Assessment in A Casting Industry

Nishtu. A. P

2017

Investigations On Prediction of Local Heat Flux on Membrane Water Wall Tubes of Sub-Critical Boiler

Sankar G

 

2016

Computer Monitoring Safety System Assessment For Generator Rotor Cooling System

Mondi Dheeraj Kumar

2016

Studies On the Performance of Utility Boiler with Variation in Ash Content of Coal

Harikrishnan S Pillai

2016

Investigation Of Work-Related Disorders and Ergonomics Design of Seat in Forklifts

Karanam Venkiteshvarlu

2016

Fatigue Evaluation in Manual Handling Using Surface Emg and Ergonomic Design consideration Of Trolley

Singamsetty Vamshi Krishna

 

    2016

Comparison Of Oil Fire Suppression Using Water Mist Ultrasonic Vibrator and Twin Fluid System

M Harihara Sudhan

2016

Design And Development of The Handle For Vibrating Plate Compactor for Mitigating Hand-Arm Vibration

N. Sivasankara Naik

 

2015

Oxidation Behaviour on T22 Steel Using High Velocity Oxy Fuel Coating

Ashu Kumar

2015

A Mathematical Approach for Determining Fatigue Of Muscle Group Using Fatigue Model by Emg And Its Validation

Sangamshetty Vamshi Krishna

2015

Experimental Study of Suppressing Oil Fires Using Water Mist Ultrasonic Vibrator and Optimizing Fire Extinguishing Parameters

M. Harihara Sudhan

2015

Economic Assessment and Recommendations for Design of Mobile Crane Cabin

Mondi Dheeraj Kumar

2015

Analysis Of Hand Transmitted Vibrations During Soil Compaction with Vibrating Plate Compactor

N Sivasankara Naik

2014

Computational Fluid Dynamic Analysis of Tig Welding of 304 L Stainless Steel Molten Pool

Ashu Kumar

2014

Design And Implementation of Automatic Nitrogen Fire Suppression System in Electrical Enclosures

Jiss Mathew

2014

Excremental Investigations and Mathematical Modelling of Seated Occupants Exposed to Vertical Vibrations in Midi Bus

Seenath K T

2014

Numerical Investigation of Three-Dimensional, Transient Heat Transfer and Fluid Flow Weld Pool During Tig Welding of 3041 Stainless Steel

Rohith Thomas

2014

UG PROJECTS

Title

Year

Numerical investigation of immersed jet cooling for thermal management of Li-ion battery

2021

Developing a PCM based thermal management system for Li-ion battery packs

2021

Numerical investigation of PCM based baffle structured heat sink for thermal

management of electronic components

2020

Thermal stress analysis of parabolic trough receiver with concentrated solar radiation

2019

CFD analysis of vortex induced vibration of absorber tube in solar trough collector

2019

Electromagnetic Reciprocating Engine

2017

Study of Erosion Behaviour of HVOF Coated Carbon Steel

2017

A Theoretical Study of Flow Boiling In Straight And Tapered Microchannels And Micro gaps

2017

Hydraulic Solar Tracker

2016

Comparative Study of Mars Rover Suspension

2016

Vibration Of Non-Uniform Continues Railway Bridge Under Moving Load

2016

Design of a Conveyor System For Loading And Unloading

2015

Oxidation Resistance of HVOF Ni-Cr-Tio2 Coating on Alloy Steel (T22) At 900c

2015

Study of Storing and Packaging Processes of Agricultural Product in India

2015

Design and Fabrication of A Parallel Manipulator and Optimization of Its Path Planning

2015

CFD Analysis of Heat Transfer and Fluid Flow In Weld Pool During Tig Welding Of 304L Stainless Steel

2014

Effect of Ethanol Gasoline Blend in 4 Stroke Spark Ignition Engine

2013

A-Tig Welding of 304 L Using Single Component Flux

2013

Simulation and Analysis of Fluid Flow During the Laser Beam Welding of Aisi 304 Stainless Steel

2010

Analysis Of Heat Transfer Characteristics of Active and Passive Heat Sinks Used in Integrated Circuits

2009

Effect Of Preheated Waste Cooking Oil on the Performance and Emissions in Di Diesel Engine

2009