International Conference

  1. S.V. Aditya, Muthukannan Duraiselvam, K. Parthiban, Vishal Bagade, “ Simulation on the effect of laser surface texturing in enhancing bond strength of thermal barrier coating”, International Conference on Design and Manufacturing IConDM-2016, 16-17 December 2016, pp 67-71, Chennai, India.
  2. S.V. Aditya, Muthukannan Duraiselvam, K. Parthiban, Vishal Bagade, “Laser Surface Texturing of Nickel Superalloy to Improve Adhesion Bond Strength of Thermal Barrier Coating”, International conference on Engineering & Technology, Computer, Basic & Applied Science ECBA-2016, 03-04 December 2016, Vol. 364, Issue 5, ISBN 978-969-683-121-1, Sydney, Australia.
  3. K.E. Sarath Raghavendra Babu, L. Manikanta Reddy, Muthukannan Duraiselvam, “Surface Micro-texturing of Silicon by Picosecond Laser to Enhance Antireflection Effect”, International Conference on Application of Lasers in Manufacturing 2015, Pragati Maidan, 9 – 10 September 2015, New Delhi, India.
  4. Ramesh Raju, Muthukannan Duraiselvam, Arun G. K., “Finite Element Modeling and Experimental Investigation of Laser Clad Inconel 718 for Aerospace Structural Materials”, International Conference on Application of Lasers in Manufacturing 2015, Pragati Maidan, 9 – 10 September 2015, New Delhi, India.
  5. S. Baskaran, V. Anandakrishnan, Muthukannan Duraiselvam, N. Keerthivasan, “A study on dry sliding friction behavior of TiC reinforced AA7075 in-situ composites by Taguchi technique”,2nd IRF International Conference, pp 1 -4, 21 June 2014, Singapore.
  6. Ramesh Raju, Muthukannan Duraiselvam, Arun G. K, Vijay Petley, Shweta Verma, Rajendran R,“Mechanical and metallurgical characterization of laser metal deposited aero-engine blade materials”, 28th International Conference on Surface Modification Technologies, SMT 28, 16 - 18 June 2014, Tampere University of Technology, Tempere, Finland.
  7. Duraiselvam M, Ramesh, Sai Balagi T. S, Ranajyoti Dutta, Sai Prashanth T. S, Vamshi Krishna,“Optimization of Process Parameters for Laser Surface Cladding using Geometric Programming” International Mechanical Engineering Congress 2014, National Institute of Technology: Tiruchirappalli, 13 - 15 June 2014, Tamilnadu, India.
  8. Ramesh Raju, Muthukannan Duraiselvam, Arun G. K, “Numerical Finite Element Investigation on Laser Cladding of Aerospace Components”, International Conference on Reliability and Safety Engineering, Anna University – BIT Campus, 16 - 18 February 2014, Tamilnadu, India
  9. V. Dillibabu, Muthukannan Duraiselvam, Rahul V. S, “Finite Element Simulation and Optimization of Dissimilar Welding for Gas Turbine Applications”, International Conference on Reliability and Safety Engineering, Anna University – BIT Campus, 16 - 18 February 2014, Tamilnadu, India.
  10. M. Hashim, K.E. Sarath Raghavendra Babu, Muthukannan Duraiselvam,Harshad Natu, “A comparative study of laser surface treated Hastelloy C-276 in argon and nitrogen atmosphere”, Second International Conference on Advances in Materials Processing and Characterisation, Anna University, 6 -8 February 2013, Chennai, India.
  11. Muthukannan Duraiselvam, G. M. Balamurugan, “Tribological analysis of AISI 304 Austenitic stainless steel at high temperature”, International Conference on Advances in Mechanical and Computer Engineering (ICAMCE-2013), 18 – 19 January 2013, Haryana, India.
  12. Rajesh. S, A. Gopala Krishna, P. Rama Murthy Raju, M. Duraiselvam, “Statistical Analysis of Wear Characteristics of Aluminum Metal Matrix Composites”, International Conference on Intelligent Manufacturing Systems (ICIMS 2012), SASTRA University 17 – 18 February 2012, Tamilnadu, India.
  13. Muthukannan Duraiselvam, S.M. Shariff, G. Padmanabham, “Application of laser surface engineering in power generation and automobile industries”, Asia Pacific Interfinish 2010, October 19-22, Singapore.
  14. N. L. Parthasarathi, Muthukannan Duraiselvam, G. M. Balamurugan, “Influence of temperature in dry sliding wear of AISI 316 austenitic stainless steel”, accepted, 14-16 January, 2010, Advances in Materials, Mechanics and Management, College of Engineering Trivandrum, Kerala, India.
  15. Muthukannan Duraiselvam, More Satish Dashrathrao, Naveen R, S. Natarajan, “Simulation and Analysis of Dry Sliding Wear of Automobile Brake pad – Ti-6Al-4V disc pair using Finite Element Method”, International Conference on Latest Trends in Simulation Modelling and Analysis (COSMA 2009), December 17-19, pp. 461-464, 2009, NIT Calicut, Kerala, India.
  16. Muthukannan Duraiselvam, R. Naveen, S. Natarajan, More Satish, “Wear analysis of Ti6Al4V alloy - brake pad pair for automobile/aircraft disc brakes at elevated temperatures”, Surface Modification Technologies, SMT 23, 02 - 04 November, 2009, Mamallapuram, India, pp. 339-343.
  17. G. M. Balamurugan, Muthukannan Duraiselvam , N. L. Parthasarathi, “Sliding wear behaviour of WC-Co plasma sprayed coating on AISI 304 steel at room temperature”, India-Japan conference on Advances in materials processing, accepted, Annamalai University, Chidambaram, 30 September - 2 October, 2009, India.
  18. N. L. Parthasarathi, Muthukannan Duraiselvam, G. M. Balamurugan, “Dry sliding wear behaviour of plasma sprayed NiCrBSi coating on AISI 316 steel at room temperature”, India-Japan conference on Advances in materials processing, accepted, Annamalai University, Chidambaram, 30 September - 2 October, 2009, India.
  19. Hemalatha Thiagarajan, M. Duraiselvam, Srisankaraswaminathan J. V. , “Integration of aggregate production planning and distribution optimization using ACO with fuzzy forecasting”, 6th International Conference on Supply Chain management and Information Systems (SCIMS 2008), December 8 - 10, National Institute of Technology, Tiruchirappalli, India.
  20. Muthukannan Duraiselvam, N.L. Parthasarathi, “Experimental Investigations of the impact of laser process parameters on the microstructural outcome”, International Conference of Fascinating Advancements in Mechanical Engineering (FAME 08), December, pp. 509-511, 2008, Sivakasi, India.
  21. Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike, “Correlation of liquid impact erosion resistance of laser alloyed nickel and titanium based intermetallic matrix composites with instrumented indentation-derived properties”, Surface Modification Technologies, SMT 22, 22 - 24 September, pp. 321-327, 2008, Trollhattan, Sweden.
  22. V. Sivaraman, M. Duraiselvam, S. Ananthakumar, R. Krishnamurthy, “Ultrasonic machining of ZrO2/Al2TiO5 ceramic composites”, IISc Centenary-International Conference on Advances in Mechanical Engineering, IC-ICAME, July 2-4, 2008, Bangalore, India.
  23. N.L. Parthasarathi and M. Duraiselvam, “Process Parameter Optimization Involved in Laser Cladding of AISI 420 Martensitic Stainless Steel”, International Conference on Advanced Manufacturing Technology, Central Mechanical Engineering Research Institute Manufacturing Technology & Foundry Groups, November 29-30, 2007, Durgapur, India.
  24. M. Duraiselvam, “Experimental Investigations of the Impact of Laser Process Parameters on the Microstructural Outcome”, International Conference on Advanced Manufacturing Technology, Central Mechanical Engineering Research Institute Manufacturing Technology & Foundry Groups, November 29-30, 2007, Durgapur, India.
  25. V. Sivaraman, M. Duraiselvam, “Influence of Nano-Coating on Cutting Tools”, International Conference on Advanced Materials and Composites, National Institute for Interdisciplinary Science & Technology (NIIST), CSIR, October 24-26, 2007, Thiruvananthapuram, India.
  26. Muthukannan Duraiselvam, R.Galun, V.Wesling, B.L. Mordike, “Laser clad WC reinforced Ni-based intermetallic-matrix composites to improve cavitation erosion resistance”, 24th International Congress on Applications of Lasers and Electro-Optics ICALEO, October 31- November 3, pp. 611-620, 2005, Miami, Florida, USA.
  27. Muthukannan Duraiselvam, G. Buvanashekaran, A. Noorulhaq, “Laser surface alloying of SiC coating on AISI 430 Ferritic stainless steel”, International Conference on Advances in Surface Treatment: Research and Applications (ASTRA), November 3-6, pp. 213-217, 2003, Hyderabad, India.
  28. G. Buvanashekaran, Muthukannan Duraiselvam, A. Noorulhaq, “Laser surface modification technique to improve metallurgical properties of AISI 304 stainless steel”, International Conference on Advances in Surface Treatment: Research and Applications (ASTRA), November 3-6, pp. 229-234, 2003, Hyderabad, India.