Conferences & Journals

Papers published in Journal:

PUBLICATIONS

  

International Journals:

  1. K.Panneerselvam, S.Aravindan and A.NoorulHaq, “Hybrid of ANN with genetic algorithm for optimization of frictional vibration joining process of plastics” International Journal of Advanced Manufacturing Technology, 42, (2009), 669-677.Impact Factor: 1.103
  2. P. Sathiya, S. Aravindan, A. NoorulHaq, K. Panneerselvam, “Optimization of friction welding parameters usingevolutionary computational techniques” journal of materials processing technology 209 (2009) 2576–2584.  Impact Factor: 1.783 .
  3. P. Sathiya, K. Panneerselvam, M.Y. Abdul Jaleel, “Optimization of laser welding process parameters for super austenitic stainless steel using artificial neural networks and genetic algorithm” Materials & Design, 36(2012) 490-498. Impact Factor: 2.20
  4. P. Sathiya, K. Panneerselvam, R. Soundararajan, Optimal design for laser beam butt welding process parameter using artificial neural networks and genetic algorithm for super austenitic stainless steel” Optics & Laser Technology, 44(6) (2012),1905-1914. Impact Factor: 1.515
  5. K. Panneerselvam, S. Aravindan, A. Noorul Haq “Study on resistance welding of glass fiber reinforced thermoplastic composites” Materials & Design,  41, (2012), 453-459. Impact Factor: 2.20
  6. K. Panneerselvam, K. Pradeep, P. Asokan “Optimization of End Milling Parameters for Glass Fiber Reinforced Plastic (GFRP) Using Grey Relational Analysis Original Research Article”  Procedia Engineering, 38(2012) 3962-3968. Impact Factor: 0.235
  7. K. Panneerselvam and K. Lenin, Investigation of Effect of tool Forces and joint defects during FSW of Polypropylene plate. Procedia Engineering 38 (2012) 3927-3940. Impact Factor: 0.235
  8. K. Panneerselvam and K. Lenin,  Effects and Defects of the Polypropylene plate for Different parameters in Friction stir welding process. International journal of Research in Engineering and Technology, 2(2) (2013) 143-152. Impact Factor: 2.375
  9. K. Panneerselvam and K. Lenin, Study on hardness and microstructural  characterization of friction stir welded nylon 6 plate. International Journal of Mechanical Engineering, 2(2) (2013) 51-62. Impact Factor: 3.2766
  10. Lenin, K., K. Panneerselvam, Optimizing the welding parameters of Friction stir welding by using resultant force and defects for Nylon 6 material, International Journal of Mechanical Engineering, 2(2), (2013) 77-84. Impact Factor: 3.2766
  11. Lenin, K., K. Panneerselvam, Joining of Nylon 6 plate by friction stir welding process using threaded pin profile, Materials and Design (Elsevier), 53, (2014)  302−307. Impact Factor: 2.20
  12. K Lenin, H Abdul Shabeer, K Suresh Kumar and K Panneerselvam, Process parameters optimizations for friction welding of polypropylene materials using Taguchi’s approach, Journal of Scientific & Industrial Research, 73, (2014) 369-374.
  13. Shunmugesh K., Panneerselvam K., Pramod M. and Amal George, Optimization of CNC Turning Parameters with Carbide Tool for Surface, Roughness Analysis Using Taguchi Analysis, Research Journal of Engineering Sciences,  3(6), (2014) 1-7.
  14. Shunmugesh. K, Panneerselvam. K, Jospaul Thomas, A nova Based Optimization of Machining Parameters in Drilling of Glass Fiber Reinforced Polymer (GFRP) Composites, International Journal of Emerging Engineering Research and Technology, 2(3),(2014) 53-60.
  15. Shunmugesh K., Panneerselvam K., Pramod M. and Amal George, Optimization of Turning Parameters with Carbide Tool for Surface Roughness Analysis, International Journal of Emerging Engineering Research and Technology, 2(2),(2014), 149-154.
  16. Shunmugesh K, Panneerselvam. K, Jospaul Thomas, Optimising Drilling Parameters Of GFRP By Using Grey Relational Analysis, International Journal of Research in Engineering and Technology, 03(06), (2014), 302-305.
  17. Shunmugesh.K, Panneerselvam K, Amal George, Optimization Of Turning Parameters With Carbide Tool For Surface Roughness Analysis Using Response Surface Methodology, International Journal Of Research In Aeronautical And Mechanical Engineering Optimization Of Turning Parameters,2(6),(2014) 17-27.
  18. K.Panneerselvam, S.Aravindan and A.NoorulHaq,“An innovative approach for optimization of  Frictional Vibration Joining Process” The International Journal for Manufacturing Science & Production, 9, 3-4, (2008), 203-216.
  19. K.Panneerselvam, S.Aravindan and A.NoorulHaq, “Joining of thermoplastic by frictional vibration”, Journal of Modern Manufacturing Technology, 1(1), (2009), 83-92.
  20. K.Panneerselvam, S.Aravindan and A.NoorulHaq, “A Heuristic Approach For a Real Time -Mixed Model Assembly Systems To Reduce Idle Time And Material Handling Cost”, International Journal of logistics and supply chain management 1(2),2009, pp.97-101.(Selected form the Proceeding of Six international on Supply chain management and Information system (SCMIS-2008), December 8-10, 2008, 690-695).
  21. Krishnasamy Vijaykumar, Kavan Panneerselvam, and Abdullah Naveen Sait (2014). Machining Parameter Optimization of Bidirectional CFRP Composite Pipe by Genetic Algorithm. Materials Testing: Vol. 56, No. 9, pp. 728-736.
  22.     K Vijay Kumar,    A Naveen Sait,    and K Panneerselvam,  Machinability study of hybrid-polymer composite pipe using response surface methodology and genetic algorithm, Journal of Sandwich Structures and Materials, 2014; 16( 4),  418-439.
  23. Panneerselvam, K., and K. Lenin. "Parameters optimization in FSW of Polypropylene base on RSM" Multidiscipline modeling in Materials and Structures,  11(1), 32 – 42.
  24. Sudhir kumar and K. Panneerselvam. “Research on tribological behaviors of pure and glass fiber reinforced nylon 6 composites against polymer disc” Journal of material science and mechanical engineering Vol. 2, No. 6 (2015): 24-28
  25. Sudhir kumar and K. Panneerselvam. “Multi objective optimization of friction and wear of pure and glass fiber reinforced nylon 6 composites using taguchi based grey relational technique” Journal of material science and mechanical engineering Vol. 2, No. 10 (2015): 7-11

 

National Journal:

  1. P. Sathiya, S. Aravindan, A. Noorul Haq, K. Paneerselvam, “Optimization of Process Parameters of Friction Welding by Genetic algorithm” ,  Journal of Manufacturing Technology Today, 2005, Vol.4,  pp 9-15
  2. K.Panneerselvam, S.Aravindan A.Noorul Haq and R.Krishnamurthy, “Joining of Polymeric Matrix Composites” Published in IWS journal, Vol 1, July 2005, 15-19.
  3. P. Sathiya, S. Aravindan, A. Noorul Haq, K. Panneerselvam “Optimization of friction welding parameters using simulated annealing” Indian journal of Engineering & Materials sciences, Vol.13, February 37-44. 

 

Papers published in Conferences:

 

International Conferences:

  1. K.Panneerselvam, S.Aravindan and A.NoorulHaq “Joining of plastic by frictional vibrations”, published in proceedings of International Symposium of Research Students on Materials Science and Engineering, IIT, Madras, 20-22 December  2004,66.
  2. K.Panneerselvam, S.Aravindan and A.NoorulHaq “Friction Stir Welding” published in Proceedings of International Exhibition & conference on Advancements in materials and Process Used in the Manufacturing of transport Vehicles & Automobiles (TRANSMAT EXPO 2004), 8-10 November   2004, 29.
  3. K.Panneerselvam, S.Aravindan and A.NoorulHaq “Optimization of process parameters of Tungsten Inert Gas Welding using Evolutionary Computational Techniques” Proceeding of  International Symposium on smart Material and Systems (ISSMS-2004), 15th -17th  December 2004, 376-383.
  4. K.Panneerselvam, S.Aravindan and A.NoorulHaq “Joining of plastic by frictional vibrations”, published in Proceedings of IIW-IC 2005, 16-19 February 2005, pp-149.
  5. K.Panneerselvam, S.Aravindan and A.NoorulHaq “An innovative approach for optimization of frictional vibration joining process”, Proceeding of GMI-2006 Conference, July 27-29, 2006.
  6. K.Panneerselvam, S.Aravindan and A.NoorulHaq “Joining of polymeric matrix composites” Proceeding of International conference on Advances in Materials Processing and Characterization (AMPC2006) during 28-30 August 2006, Vol. 1, 508-515.
  7. K.Panneerselvam, S.Aravindan and A.NoorulHaq “Joining of thermoplastics and thermoplastic composites” published in Asian Symposium on Materials and Processing 2006, November 9-10, 2006 at Sofitel Central Plaza Bangkok, Thailand, Organized by Japan Society of Mechanical Engineers, Division of Materials and Processing, Japan National Metal and MaterialsTechnologyCenter, NSTDA, Thailand, pp- 144.
  8. K.Panneerselvam, S.Aravindan and A.NoorulHaq “Resistance welding of thermoplastic composites” Published in Proceedings of International Symposium of Research Students on Materials Science and Engineering, IIT, Madras, 18-20 December 2006, pp-102.
  9. K.Panneerselvam, S.Aravindan and A.NoorulHaq “Optimization of process parameters for friction welding of ferritic stainless steel using taguchi technique” Published  in Proceedings of international conference on recent advances in materials & processing –RAMP-2006, Organised by  Department of Metallurgical Engineering PSG College of Technology Coimbatore – 641 004, INDIA. December 15 – 16, 2006, pp- 48
  10. K.Panneerselvam, S.Aravindan and A.NoorulHaq “Fusion bonding of thermoplastic composites” published in Proceedings of Second International Conference on Recent Advances in Composite Materials (ICRACM – 2007), Organised by  Institute Of Technology Banaras Hindu University Department Of Mechanical Engineering Varanasi – 221 005, India, February 20-23, 2007.
  11. K.Panneerselvam, S.Aravindan and A.NoorulHaq “Investigation and Analysis of Friction Stir Welding Parameters on Metal Matrix Composite (Al-SiC)”published in  Proceedings of international conference on Advanced materials and composite, (ICAMC-2007), 24 -26 October 2007, thiruvananthapuram, Kerala, INDIA.
  12. K.Panneerselvam, S.Aravindan and A.NoorulHaq “Joining of Glass Fiber Reinforced Polypropylene Thermoplastic Composites”published in  proceeding of InternationalandINCCOM-6 Conference on “Future Trends in Composite Materials andProcessing” IITK.
  13. K.Panneerselvam, S.Aravindan and A.NoorulHaq “FEAanalysis of resistance welded thermoplastic compositejoints ”published in proceedings of the IIW IC 2008 held during 8-10 January, 2008, at Chennai Trade Centre, Nandambakkam, Chennai-600 089.
  14. K.Panneerselvam, S.Aravindan, S.Sivasankaran and A.NoorulHaq“Study on Milling of Glass Fiber Reinforced Plastic (GFRP) Composite”published inproceeding of the International Conference on ADVANCES IN MANUFACTURING TECHNOLOGY (ICAMT2008) for Young Engineers, February 6th -8th , 2008, Chennai.
  15. K.Panneerselvam, S.Aravindan and A.NoorulHaq “OPTIMIZATION OF END MILLING PARAMETERS FOR GLASS FIBER REINFORCED PLASTIC (GFRP) USING GREY RELATIONAL ANALYSIS”, published in proceeding of the3rd International Conference on Heterogeneous Material Mechanics (ICHMM-2011), May 22-26, 2011,Shanghai (ChongMing Island), China, P-1104-1107
  16. K.Panneerselvam, S.Aravindan and A.NoorulHaq “Advanced Welding of Composite Material”,in proceeding of the3rd International Conference on Heterogeneous Material Mechanics (ICHMM-2011), May 22-26, 2011,Shanghai (ChongMing Island), China, P-1067-1071
  17. K.Panneerselvam, K.Pradeep and P.Asokan “'TAGUCHI MULTI-PERFORMANCE
    CHARACTERISTICS OPTIMIZATION IN MILLING OF GLASS FIBER REINFORCED PLASTIC (GFRP) COMPOSITES USING UTILITY CONCEPT”International Conference on Computational Methods in ManufacturingICCMM 2011, December 15-16, 2011, Organized by Department of Mechanical Engineering , Indian Institute of Technology Guwahati, India.
  18. P.Sathiya, K.Panneerselvam and M.Y.AbdulJaleel, “Process Parameter Optimization of the Argon shielded laser welding of super austenitic stainless steel”published in proceedings of the   Second International Conference on MetaComputing 2011,December 15-16, 2011, NIO,  Goa, India.
  19. K. Panneerselvam and K. Lenin, Investigation of Effect of tool Forces and joint defects during FSW of Polypropylene plate. International conference on Modeling, optimization and Computing, 2012.
  20. K. Panneerselvam, K. Pradeep, P. Asokan “Optimization of End Milling Parameters for Glass Fiber Reinforced Plastic (GFRP) Using Grey Relational Analysis Original Research Article”. International conference on Modeling, optimization and Computing, 2012.
  21. K. Panneerselvam and K. Lenin, Investigation of process parameters during FSW and FVW of casted Acrylic plate. Third International conference on Production and Industrial Engineering, 1(2013) 36.
  22. K. Panneerselvam and K. Lenin, Study on Friction stir welding of Nylon 6 plates. International Conference on Engineering, Technology and Management, 1 (2012)101-105.
  23. K. Panneerselvam and K. Lenin, Optimizations of Friction Stir Welding Parameters for Nylon 6 material. International Symposium for Research Scholars, 1 (2012) 47.
  24. K. Panneerselvam, K. Lenin and Sachin Kumar, Selection of FVW tool, feed rate and frequency for joining nylon 6 and polypropylene plates. Third International conference on Production and Industrial Engineering, 1(2013)36.
  25. K. Panneerselvam and K. Lenin, Investigation of effects of Tool forces and joint defects during FSW of Nylon 6 Plate. International conference of Advances in material processing and Characterization, 2 (2013) 713-724.
  26. Jafrey Daniel D and K. Panneerselvam. “ An experimental investigation on polymeric nano composite material” Proceedings of the 5th International and 26th All India Manufacturing Technology, Design and Research Conference. AIMTDR 2014, Dec 12-14, 2014 IIT Guwahati, 2015
  27. Sudhir kumar and K. Panneerselvam.“Tribological properties of glass fiber reinforced nylon 6 against various counterparts” Proceedings of the international conference on advances in production and industrial engineering, NIT Trichy, 2015: 359-364
  28. Sudhir kumar and K. Panneerselvam.“Dry sliding wear cheracteristics of pure and glass fiber reinforced nylon 6 against AISI D2 steel disc” Proceeding of international conference on Advances in materials, Manufacturing and Applications, NIT Trichy, 2015:1003-1010

 

 National Conference:

  1. K.Panneerselvam, S.Aravindan and A.NoorulHaq “JOINING OF PLASTIC BY FRICTIONAL VIBRATION” Proceedings of the National Conference on Modeling and Analysis of Production System(MAPS), at National Institute of Technology, Tiruchirappalli -620015 Tamilnadu, January 22nd and 23rd , 2004, pp- 190-103.
  2. K.Panneerselvam, S.Aravindan and A.NoorulHaq “DYNAMIC ANALYSIS OF A  COMPRESSOR CRANKSHAFT” Proceedings of National Conference on Recent Trends in  Manufacturing Modeling and Analysis (MMA) 2004, St. Joseph’s College of Engineering – Chennai- India.
  3. K.Panneerselvam, S.Aravindan and A.NoorulHaq “FRICTION STIR WELDING” Proceedings of the National  Conference on ADVANCES IN MATERIALS AND MANUFACTURING TECHNOLOGY (CAMMT – 2004) at Indian Institute of Technology Madras, Chennai – 600 036, India., April 2, 2004, pp- 99-100. 
  4. K.Panneerselvam, S.Aravindan and A.NoorulHaq “JOINING OF THERMOPLASTIC MATRIX COMPOSITES BY FRICTIONAL VIBRATION” Proceeding of National welding Seminar -2005.
  5. K.Panneerselvam, S.Aravindan, S.Sivasankaran and A.NoorulHaq“STUDY OF MILLING OF GFRP COMPOSITE USING STATISTICAL ANALYSIS (ANOVA)”  published in the proceeding of  National Conference of Emerging Trends in Mechanical Engineering and Sciences (ETIMES-2007) held on December 19th -20th , 2007 at Bannary Institute of Technology, Erode, pp-175-181.
  6. K.Panneerselvam, S.Aravindan, S.Sivasankaran and A.NoorulHaq“STUDY ON MILLING OF GLASS FIBER REINFORCED PLASTICS (GFRP) COMPOSITE”, published in the proceeding of   National Conference of Emerging Materials and Technologies for India 2020 (EMT-INDIA 2020) to be held on January 24th – 25th, 2008 at NITT, Trichirappalli. 
  7. K.Panneerselvam, S.Aravindan and A.NoorulHaq “ Investigation on End milling of Glass Fiber Reinforced Plastic (GFRP) composites” Proceeding of All India seminar on Automation trends in manufacturing industries: cutting edge technologies & their impact,  organized by The Institute of Engineers(INDIA),  May 23-24 ,2008,  New Delhi
  8. Sudhir kumar and K. Panneerselvam “Multi Objective Optimization of Tribological Property of Nylon 6 Composites using Hybrid Taguchi” Grey Relational Analysis and Cuckoo Search Algorithm” Proceedings of the 17th ISME Conference, IIT Delhi, October 3-4, 2015,
  9. Jafrey Daniel D and K. Panneerselvam “Mechanical Investigation of Friction Stir Welded Polymeric Nano composites Joints” Proceedings of the 17th ISME Conference, IIT Delhi, October 3-4, 2015