- B Ravisankar and A Rajadurai "Pack Boronising of AISI 304 & 410 stainless steel" - International Convention on Surface Engineering - INCOSURF - 92 held at Bangalore during December 1992.
- B.Ravisankar, S S Ramakrishnan and P C Angelo "Fabrication of hollow cylinder in YBCO by diffusion bonding under superplastic conditions" - International conference on Processing & Manufacturing of Advanced Materials - Processing, Fabrication and applications (THERMEC 2000) held at Las Vegas, USA during December 4-8, 2000 and published in the form of CD
- Sujit Singh, R P Sugavaneswaran, B Ravisankar J Krishnamoortih and P C Angelo "Production of nano – sized grains by severe plastic deformation” - International Conference on NANO TECHNOLOGY – materials and Methods, held at Coimbatore Institute of Technology, Coimbatore during June 23-25, 2006. PP 15
- B.Ravisankar, J.Krishnamoorthi and P.C.Angelo , “ Diffusion Bonding of Ti-6Al-4V with IN 718 using Nickel as Interlayer” – International Conference on Recent Advances in Materials and Processing (RAMP 2006) held at PSG College of Technology, Coimbatore during 15-16, December 2006. PP 87
- J.Krishnamoorthi, V.Balusamy, P.C.Angelo and B.Ravisankar , “ Diffusion Bonding of Ti-6Al-4V with AISI SS 304 using Interlayers” – International Symposium for Research Scholars (ISRS 2006) held at Indian Institute of Technology, Chennai during 18-20, December 2006. The paper bagged ARCI Technical Excellence award.
- M.Nandhakumaran, S.Kumaran, B.Ravisankar and T.Srinivasa Rao, ” Synthesis and characterisation of Fe-Based multicomponent bulk metallic glasses by high energy ball milling” – International conference on Powder Metallurgy and particulate materials (PM 07), Noida during 9-11, February 2007 PP 33.
- R.Arivazhagan, B.Prabha, S.Manimozhi, S.Suresh, G.Umashanker, R.Nagalakshmi and B.Ravisankar, “ Metallurgical studies in super 304H Austenitic stainless steel” – International symposium on Advances in Stainless steels, Chennai during 9-11, April 2007 PP A 114.
- .Venkatachalam, B.Ravisankar and S.Kumaran, “ Analysis of stress distribution in Equal Channel Angular Pressing (ECAP) of CP-Al using ABAQUS” – International Conference on Modeling and Simulation, Coimbatore during 27-29, August 2007 PP 34
- M.Venkatesan, P.Venkatachalam, B.Ravisankar and S.Kumaran, “ Effect of cold and cryo rolling on microstructure and mechanical properties of Al 6012 alloy” – International Conference on Advanced materials and Composites (ICAMC-2007), Thiruvananthapuram during 24-26, October 2007 PP 122
- S.Jerome, S.P.Kumaresh Babu, B.Ravisankar and K.S.Pandey, “ Prediction of welding residual stresses in butt welded GTAW process by finite element analysis” – International Conference on Advanced materials and Composites (ICAMC-2007), Thiruvananthapuram during 24-26, October 2007 PP 133
- P. Venkatachalam, B. Ravisankar, V. Thamos Paul, M. Vijayalakshmi and S. Kumaran, “ Enhancement of strength in Al 2014 alloy through grain refinement by ECAP” – International Conference Junior Euromat 2008, University of Laussane, Switzerland during 14-17, July 2008.
- Venkatachalam, B. Ravisankar, V. Thamos Paul, M. Vijayalakshmi and S. Kumaran “Effect of Microstructural and Mechanical properties of Al 2014 alloy Processed through route A and BA International Symposium for Research Scholars (ISRS 2008) held at Indian Institute of Technology, Chennai during 10-12, December 2008.
- Meenu Srivastava, J.N.Balaraju, B.Ravisankar, V.K.William Grips, K.S.Rajam, “DEVELOPMENT OF NANOCRYSTALLINE Ni-Al COATINGS AND ITS THERMAL STABILITY” International Conference on Synthesis, Characterisation, Consolidation and Modelling Nano Materials (ICON – 2010) held at PSG College of Technology, Coimbatore during 5-6 March 2010.
Ramesh Kumar S, Venkatachalam P, Ravisankar B, “FINITE ELEMENT ANALYSIS OF EQUAL CHANNEL ANGULAR PRESSING (ECAP) AT DIFFERENT CORNER ANGLES BY USING DEFORM-3D” International Conference on Synthesis, Characterisation, Consolidation and Modelling Nano Materials (ICON – 2010) held at PSG College of Technology, Coimbatore during 5-6 March 2010.
S.Ramesh Kumar, P.Venkatachalam and B.Ravisankar, “3D simulation of equal channel angular pressing for different channels by using finite element method”, International conference on “Frontiers in Mechanical Engineering (FIME – 2010) held at National Institute of Technology, Surathkal, Mangalore during 20 -22 May 2010.
Ramesh Kumar S, Kondiah G, Venkatachalam P and B. Ravisankar, “Simulation of dissimilar length of the billet for Equal Channel Angular Pressing using Deform 3 D” International Symposium for Research Scholars (ISRS 2010) held at Indian Institute of Technology, Chennai during 20-22, December 2010.
S.Ramesh Kumar, S.Muhammed Zubair and B.Ravisankar, “ Simulation of microstructural changes during ECAP using DEFORM 3D” International Conference on Design and Advances in Mechanical Engioneering (ICDAAME 2011) held at SKP Engineering College, Tiruvannamalai during 16-17, 2011 pp 253-258
G.Kondaiah, K.Chandra Sekhar, B.Chaitanyakrushna, B.Ravisankar & S.Kumaran, “ Characterization of mechanically alloyed Al5083 alloy and composite and consolidation by equal channel angular pressing” International conference on Engineering and Technology Innovation (ICETI 2014) held at Kenting, Taiwan during 31 October – 04 November 2014.