List of Publications

2010-2014

International Journals

  1. S. Shanmugam, P. Kumar, and AR. Veerappan, 2014, Thermal performance of a solar dryerwith oscillating bed for drying of non-parboiled paddy grains, Energy Sources, Part A:Recovery, Utilization, and Environmental Effects, vol.36, no.17, pp.1877-1885. SCI:0.358,Taylor & Francis:1556-7230.
  2. S. Shanmugam, AR. Veerappan, and M. Eswaramoorthy, 2014, An experimental evaluationof energy and exergy efficiency of a solar parabolic dish thermoelectric power generator,Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, vol.36, no.17,pp.1865-1870. SCI:0.358, Taylor & Francis:1556-7230.
  3. M. Eswaramoorthy, and S. Shanmugam, AR. Veerappan, 2014, Modeling and analysis of asolar parabolic dish thermoelectric generator, Energy Sources Part A: Recovery, Utilization,and Environmental Effects, vol.36, no.14, pp.1531-1539. SCI:0.358, Taylor & Francis:1556-7230.
  4. G. Muthu, S. Shanmugam, AR. Veerappan, 2014, Solar parabolic dish thermoelectric generator with acrylic cover, Energy Procedia, vol.54, pp.2–10. Elsevier:1876-6102.
  5. G.Muthu, S. Shanmugam, and AR.Veerappan, 2014, Energy and exergy analysis of solar parabolic dish thermoelectric generator, Applied Mechanics and Materials, vol. 592-594, pp. 2437-2441. Transtech:1662-7482.
  6. Buckshumiyan A., AR. Veerappan, and S. Shanmugam, 2014, Effect of shape imperfections on thin-walled pipe bends under out-of-plane moment and internal pressure, Applied Mechanics and Materials, vol. 592-594, pp. 1050-1054. Transtech:1662-7482.
  7. Sumesh. S., AR. Veerappan, and S. Shanmugam, 2014, A Study on effect of shape irregularities on collapse loads of pipe bends with critical circumferential through wall crack under in-plane closing bending, Applied Mechanics and Materials ,vol. 592-594: pp 980-984.Transtech:1662-7482
  8. A. Buckshumiyan, AR. Veerappan, S. Shanmugam, 2013, Plastic collapse loads in shapeimperfect pipe bends under in-plane opening bending moment, Intl. Jl of Pressure Vessels and Piping, vol. 111-112, pp. 12–26. SCI:1.078, Elsevier:0308-0161.
  9. T. Christo Michael, AR. Veerappan, S. Shanmugam, 2013, Effect of internal pressure and shape imperfections on plastic loads of pipe bends under in-plane closing moment Engineering Fracture Mechanics, vol.105, pp. 1–15. SCI:1.662, Elsevier:0013-7944.
  10. S. Shanmugam, P. Kumar, and AR. Veerappan, 2013, Modeling and experimental studies on oscillating inclined-bed solar dryer, Jl. of Solar energy Engineering, Transactions of the ASME, vol.135, paper no.031009, pp.1-6. SCI:1.132, ASME:0199-6231.
  11. S. Shanmugam, and P. Kumar, 2013, Performance of an oscillating bed solar dryer for sunflower seeds, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, vol. 35, Issue 3, pp. 282-289. SCI:0.358, Taylor & Francis:1556-7230.
  12. M. Eswaramoorthy, and S. Shanmugam, 2013, Solar parabolic dish thermoelectric generator:a technical study, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, vol.35, no.5, pp.487-494. SCI:0.358, Taylor & Francis:1556-7230.
  13. S. Narayan, A. Rajesh Kannan, K. S. Pandey, S. Shanmugam, 2013, Workability behaviour of Fe-C-Mo steel preform during cold forging, Jl. of Iron and Steel Research International, 2013, vol.20, issue 9, pp 126-130. SCI:0.357, Elsevier:1006-706X.
  14. S. Shanmugam and P. Kumar, 2012, Performance of an oscillating bed solar dryer for sunflower seeds, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, vol.35, no.3, pp.282-289. SCI:0.516, Taylor & Francis:1556-7230.
  15. Eswaramoorthy, M., and Shanmugam, S., 2012, The thermal performance of a low cost solar parabolic dish collector for process heat, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, vol.34, no.18, pp.1731-1736. SCI:0.516, Taylor & Francis:1556-7230.
  16. M. Eswaramoorthy, and S. Shanmugam, 2012, Numerical model to compute the heat loss in focal receiver of solar parabolic dish thermoelectric generator, Energy Sources, Part A:Recovery, Utilization, and Environmental Effects, vol.34, no.10, pp.959-965. SCI:0.516,Taylor & Francis:1556-7230.
  17. T. Christo Michael, AR. Veerappan, S. Shanmugam, 2012, Comparison of plastic limit and loads in pipe bends with shape imperfections under in-plane bending and an internal pressure, Int. Jl. of Pressure Vessels and Piping, vol. 99-100, pp. 23–33. SCI:0.932, Elsevier:0308-0161.
  18. T. Christo Michael, AR. Veerappan, S. Shanmugam, 2012, Effect of ovality and variable wall thickness on collapse loads in pipe bends subjected to in-plane bending closing moment, Engineering Fracture Mechanics, vol.79, pp.138-148. SCI: 1.413, Elsevier:0013-7944.
  19. Rajeshkannan, A., Pandey K.S., and Shanmugam, S, and Narayan, S., 2012, Some studies on sintered cold deformed plain carbon alloy steels, Materials & Design; vol. 33, pp.115-120. SCI:1.107, Elsevier:0261-3069.
  20. S. Shanmugam, P. Kumar, and AR. Veerappan, 2011, Evaluation of thermal efficiency of oscillating-bed solar agricultural dryer, Jl. of Renewable and Sustainable Energy, vol.3, pp. 043116-1-043116-8. SCI:1.214, AIP:1941-7012.
  21. P. Kumar, S. Shanmugam; and AR. Veerappan, 2011, An Experimental Study on drying of non-parboiled paddy grains using an oscillating bed solar dryer, Energy Engineering, vol. 108 (2), pp. 69–80. Taylor & Francis:1546-0118.
  22. S. Shanmugam, M. Eswaramoorthy, and AR. Veerappan, 2011, Mathematical modeling of thermoelectric power generator driven by solar parabolic dish collector, Int. Jl. of Applied Solar Energy, vol. 147, pp. 31-35. Springer:1934-9424.
  23. Christo Michael, T., AR. Veerappan, and S. Shanmugam, 2011, Effect of cross section on collapse load in pipe bends subjected to in-plane closing moment, Int. Jl. of Engineering, Science and Technology, vol.3, no.6, pp.247-256. VJP:0975-5462.
  24. AR. Veerappan, and S. Shanmugam, 2011, Correlation between pipe bend geometry and allowable pressure in pipe bends using artificial neural network, Int. Jl. of Engineering, Science and Technology, Vol. 3, No. 4, pp. 284-296. VJP:0975-5462.
  25. T. Christo Michael, AR. Veerappan, S. Shanmugam, 2011, Comparison Between Elliptic and Semi Elliptic Cross Sections in Pipe Bend with Shape Imperfections, Int. Jl. of Applied Engineering Research, Vol. 6, No. 7, pp. 881–889. RIP:1087-1090.
  26. S. Shanmugam, AR. Veerappan, S. Sakthivel, 2011, Determination of Furnace Temperature and Aspect Ratio of Dry Back Boilers using Computational Fluid Dynamics, Int. Jl. of Applied Engineering Research, Vol. 6, No. 7, pp. 935–945. RIP:1087-1090.
  27. T. Christo Michael, AR. Veerappan, S. Shanmugam, 2011, A Study on the Effect of Cross Section Approximation on the Behaviour of Pipe Bends with Ovality and Thinning, Int. Jl. of Advanced Engineering Sciences and Technologies, vol. 2, no. 2, pp. 133–139. IJAEST:2319-1120.
  28. S. Sakthivel, S. Shanmugam, AR.Veerappan, 2011, Determination of Heating Surface Area in Small Capacity Wood-Fired Boilers, Int. Jl. of Applied Engineering Research, Vol. 6, No. 3, pp. 401–408. RIP:1087-1090.
  29. Ramalingam Gurumani, and Subramaniam Shanmugam, 2011, Modeling and contact analysis of crowned spur gear teeth, Engineering Mechanics-Int. Jl. for Theoretical and Applied Mechanics, vol.18, no.1, pp.65-78. SCI:0.707, ISSN:1802-1484.
  30. AR.Veerappan, S. Shanmugam, S. Soundrapandian, 2010, The Accepting of pipe bends with ovality and thinning using finite element method, ASME Journal of Pressure Vessel Technology,  Vol. 132, No. 3, pp.031204:1-9.
  31. Eswaramoorthy, M., Shanmugam, S. and AR. Veerappan., 2010, A review on application for thermoelectric power generation. International Journal of Integrated  Energy System, 2(1), pp:69-75.
  32. Eswaramoorthy, M., Shanmugam, S. and AR. Veerappan., 2010, Feasibility Analysis of Solar Parabolic Dish Thermoelectric Power Generator. International Journal of Integrated  Energy System 2(1), pp:63-67.
  33. Eswaramoorthy, M and Shanmugam, S., 2010, Thermodynamic analysis of solar parabolic dish thermoelectric generator, Int. Jl. Of renewable Energy Technology, vol 1, no. 3, pp.348-360.
 
 

 

International Conferences

  1. G. Muthu, S. Shanmugam, and AR. Veerappan, Energy and exergy analysis of solar parabolic dish thermoelectric generator, Int. Mechanical Engineering Congress, NIT Tiruchirappalli, June 13-15, 2014, Tiruchirapalli, Tamilnadu,. Also accepted for publication in the Jl. of Applied Mechanics and Materials of Transtech Publications, ISBN-13, 978-3-03835-163-4.
  2. Buckshumiyan A, AR. Veerappan, and S. Shanmugam, Effect of shape imperfections on thin-walled pipe bends under out-of-plane moment and internal pressure, Int. Mechanical Engineering Congress, NIT Tiruchirappalli, June 13-15, 2014, Tiruchirapalli, Tamilnadu.Also accepted for publication in the Jl. of Applied Mechanics and Materials of Transtech Publications, ISBN-13, 978-3-03835-163-4.
  3. Sumesh. S, AR. Veerappan, and S. Shanmugam, A Study on effect of shape irregularities on collapse loads of pipe bends with critical circumferential through wall crack under in-plane closing bending, Int. Mechanical Engineering Congress, NIT Tiruchirappalli, June 13-15,2014, Tiruchirapalli, Tamilnadu,. Also accepted for publication in the Jl. of Applied Mechanics and Materials of Transtech Publications, ISBN-13, 978-3-03835-163-4.
  4. Buckshumiyan A, AR. Veerappan, and S. Shanmugam, Finite element limit analysis in pipe bends subjected to in-plane opening bending moment and internal pressure, Proc. of Int. Conf. of Computer Aided Engineering, Dec. 19-21, 2013, Department of Mechanical Engineering, IIT Madras, India, pp.133-136.
  5. G. Muthu, S. Shanmugam, and AR. Veerappan, Solar parabolic dish thermoelectric generator with acrylic cover,4th Int. Conf. on Advances in Energy Research,10-12, December 2013, IIT Bombay, Maharashtra. Also accepted for publication in the Elsevier Jl. of Energy Proceida, ISSN, 1876-6102.
  6. G. Muthu, S. Shanmugam, and AR. Veerappan, Mathematical modeling of thermoelectric generator with solar parabolic dish, 3rd Int. Conf. & Exhibition on Sustainable Energy & Advanced Material. (ICE-SEAM 2013), Melaka, 30-31 October 2013, Malaysia.
  7. S. sakthivel and S. Shanmugam, Efficient utilization of small capacity boilers, Proceedings of Int. Conf. on Boilers 2010, Nov. 23-25, 2010, Chennai trade Centre, Chennai.
  8. Eswaramoorthy M, Shanmugam, S and Veerappan AR., An analytical equation to estimate heat loss for solar parabolic dish thermoelectric generator, Proceedings of Int. conf. on Frontiers in mechanical engineering, National Institute of Technology Karnataka, Surathkal, May 20-22, 2010.
  9. Christo Michael T, AR. Veerappan and S. Shanmugam, Effect of Bend Angle on Induced Stresses In Pipe Bends – Numerical Investigation, International conference on Frontiers in Mechanical Engineering, 2010, National Institute of Technology Karnataka, Surathkal, May 20 – 22.
  10. Eswaramoorthy M and Shanmugam, S., Thermoelectric power generation: a review, Int. conf. on advances in energy conversion technologies, MIT Manipal, Jan. 5-9, 2010, pp-53-58.
 
 

List of Books

Authored

1. Shanmugam, S., Heat and Mass Transfer, Questions-and-Answers, Shanmugapriya Publishers, Tiruchirappalli, 1998.

Co-authored

1.   Palani, S and Shanmugam, S., Instrumentation and Control Systems- Questions-and-Answers, Shanmugapriya Publishers, Tiruchirappalli, 1998