| 128 | Karmuhilan, M., Kumanan, S. | "Mechanical anisotropy and failure analysis of Inconel 625 parts manufactured using Wire and Arc Additive Manufacturing (WAAM)" | Journal of Failure Analysis and Prevention | 2024 | ||||
| 127 | Karmuhilan, M., Kumanan, S. | "Effect of inter-pass layer temperatures on microstructure and mechanical properties of Inconel 625 parts fabricated using Wire and Arc Additive Manufacturing (WAAM)" |
Journal of Materials Engineering and Performance https://doi.org/10.1007/s11665-024-09148-5 |
10.1007/s11665-024-09148-5 | 2024 | |||
| 126 |
|
|
|
VOL. 37, NO. 22, 3053–3124 | 2023 | |||
| 125 | Karmuhilan, M., Kumanan, S. |
|
|
|||||
| 124 | Karmuhilan, M., Kumanan, S. | Location-dependent microstructure analysis and mechanical behavior of inconel 625 using Cold Metal Transfer(CMT) based wire and arc additive manufacturing |
Vacuum
|
Volume 207, 111682 | 2023 | |||
| 123 | Paramasivam, B., Kumanan, S., Kavimani, V., Varatharajulu, M. | Fuzzy-based prediction of compression ignition engine distinctiveness powered by novel graphene oxide nanosheet additive diesel–Aegle marmelos pyrolysis oil ternary opus | International Journal of Energy and Environmental Engineering | pp.1-19 | 2022 | |||
| 122 | G Jegan Jose, S Prasannavenkatesan, S Kumanan | Technicians Selection and Allocation in Field Services using a Hybrid Approach | International Journal of Services and Operations Management, | Vol.43 No.2, pp.249 - 268 | 2022 | |||
| 121 | A. Andrew and S. Kumanan | Spares inventory prediction using back propagation neural networks a case study | Manufacturing Technology Today, | Vol. 20, No. 7, pp- 3-8 | 2021 | |||
| 120 | Karmuhilan, M., Kumanan, S. | A Review on Additive Manufacturing Processes of Inconel 625 | Journal of Materials Engineering and Performance | pp. 1-10 | 2021 | |||
| 119 | Nair, A., Kumanan, S., Shanavas, K.P. | Heuristic optimization techniques in abrasive water jet hole making - A case study | Materials Today: Proceedings | 50, pp. 1291-1299 | 2021 | |||
| 118 | Nair, A., Kumanan, S., Shanavas, K.P. | Multi-performance optimization in wire EDM of Inconel 617 using GRA and genetic algorithm | Materials Today: Proceedings | 50, pp. 1354-1366 | 2021 | |||
| 117 | Baranitharan, P., S. Kumanan, and S. Sudhagar. | "An intelligent novel approach for diesel engine life monitoring using infrared image processing technic." | Environmental Progress & Sustainable Energy | e13712 https://doi.org/10.1002/ep.13712 | 2021 | |||
| 116 | Paramasivam Baranitharan, and Kumanan Somasundaram. | "Selection of smart fuel opus for diesel engine depending on their fuel characteristics: an intelligent hybrid decision-making approach. | Environmental Science and Pollution Research | 28, pages 62216–62234 | 2021 | |||
| 115 |
G Jegan Jose, S Prasannavenkatesan, S Kumanan |
Real time asset tracking in field services using barcode system: A Case Study | International Journal of Services Operations and Informatics | 12(1), pp. 40–57 | 2021 | |||
| 114 | Jagadeesh,S and S Kumanan | Inservice Inspection Of Cladding Using Phased Array Ultrasonic Testing System | Manufacturing Technology Today, | Vol. 17, No. 03 | 2020 | |||
| 113 | Andrew, A., Kumanan, S. | Development of an intelligent decision making tool for maintenance planning using fuzzy logic and dynamic scheduling | International Journal of Information Technology (Singapore) | 12(1), pp. 27–36 | 2020 | |||
| 112 | Nair, A., Kumanan, S. | Evaluation and optimization of geometric deviations in abrasive water jet profile cutting of Inconel 617 | Journal of Testing and Evaluation | 49(1) | 2020 | |||
| 111 | G Jegan Jose, S Prasannavenkatesan, S Kumanan | Resource Prioritization and Task Allocation in Field Services using Fuzzy MCDM and MINLP | International Journal of Latest Research in Engineering and Technology | Vol 06, 19-30 | 2020 | |||
| 110 | Dev Anand, M., Kumanan, S., Girish, R.R., Selvaraj, T., Asokan, P. | An enhanced genetic algorithm for assembly planning | International Journal of Recent Technology and Engineering | 8(2 Special issue 3), pp. 36–42 | 2018 | |||
| 109 | Shajahan, C.A., Subramanyan, E.E., Kumanan, S., Firoz, N. | Design Process Sequencing in Product Development Process Using Design Structure Matrix and Particle Swarm Optimisation Techniques | Journal of Physics: Conference Series | 1355(1) 012027 | 2017 | |||
| 108 | Nair, A., Kumanan, S. | Optimization of size and form characteristics using multi-objective grey analysis in abrasive water jet drilling of Inconel 617 | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 40(3), 121 | 2017 | |||
| 107 | Kumanan, S., Nair, A. | Prediction of multi performance characteristics of wire EDM process using grey ANFIS | IOP Conference Series: Materials Science and Engineering | 244(1), 012003 | 2017 | |||
| 106 | Anish Nair and Kumanan,S | Multi-performance optimization of abrasive water jet machining of Inconel 617 using WPCA | Materials and Manufacturing Processes | Vol. 32 Issue 6, 693-699 | 2017 | |||
| 105 | Manikandan, N; Kumanan, S; Sathiyanarayanan, C | Multiple performance optimization of electrochemical drilling of Inconel 625 using Taguchi based Grey Relational Analysis | Engineering Science and Technology, an International Journal | 20(2), 662-671 | 2017 | |||
| 104 | N.Manikandan ,S.Kumanan, C.Sathiyanarayanan | Optimisation of electrochemical drilling process using Taguchi method and regression analysis | International Journal of Machining and Machinability of materials | Vol 19 No.2 136-159 | 2016 | |||
| 103 | Kumanan,S and Vaghela S,J | Investigations on effect of direction of welding on distortion in combined butt and filled joint using finite element analysis | Indian Journal of Engineering & Materials Sciences | Vol. 24, June 2017, pp. 201-206 | 2015 | |||
| 102 | J Edwin Raja Dhas, Somasundaram Kumanan | Evolutionary fuzzy SVR modeling of weld residual stress | Applied soft computing | Vol. 42: 423-430 | 2015 | |||
| 101 | Leo Kumar, S, P; Jerald, J; Kumanan, S | Feature-based modelling and process parameters selection in a CAPP system for prismatic micro parts | International Journal of Computer Integrated Manufacturing | Vol 28 Issue 10 1046-1062 | 2015 | |||
| 100 | Ahilan, C; Edwin Raja Dhas, J ; Kumanan,S; Sivakumaran,N | Performance assessment of heat exchanger using intelligent decision making tools | Applied Soft Computing | Volume 26, January 2015, Pages 474?482 | 2014 | |||
| 99 | N.Manikandan ,S.Kumanan, C.Sathiyanarayanan | Multi Response optimization of electro chemical drilling of Titanium Ti 6Al 4V alloy using taguchi based grey relational analysis | Indian Journal of Engineering and Material science | Vol 22 153-160 | 2014 | |||
| 98 | John Edwin Raja Dhas, Somasundaram Kumanan | Neuro Evolutionary model for weld residual stress prediction | Applied Soft Computing | Volume 14 Part C, 461-468. | 2014 | |||
| 97 | Leo Kumar, S, P; Jerald, J; Kumanan, S; Aniket, N | Process parameters optimization for micro end-milling operation for CAPP applications | Neural Computing and Applications | Vol 25 No 7-8 1941-1950 | 2014 | |||
| 96 | Leo Kumar, S, P;Jerald, J; Kumanan, S; Prabakaran,R | A Review on Current Research Aspects in Tool Based Micromachining Processes | Materials and Manufacturing Processes | Vol 29 No.11-12 : 1291-1337 | 2014 | |||
| 95 | Leo Kumar, S, P; Jerald, J; Kumanan,S | An intelligent process planning system for micro turn-mill parts | International Journal of Production Research | Vol 52 No.20:6052-6075 | 2014 | |||
| 94 | Leo Kumar, S, P; Jerald, J; Kumanan, S; Chandrakar, H,V | Experimental Investigation and Optimization of Process Paramerter in Micro-Electrical Discharge Machining | Interanational Journal of Manufacturing Technology and Management | Vol.27, Nos.1/2/3 :88-100 | 2013 | |||
| 93 | Edwin Raja Dhas, J; S Kumanan | Modeling and prediction of HAZ using finite element and neural network modeling | Journal of Advances in Production Engineering and Management | 13-24 | 2013 | |||
| 92 | Ahilan, C; Somasundaram Kumanan; Sivakumaran, N; Edwin Raja Dhas, J | Modelling and Prediction of Machining Quality in CNC turning process using intelligent hybrid decision making tools | Applied Soft Computing | Vol 13: 1543-1551 | 2013 | |||
| 91 | Kumar, K; Kumanan, S | Integrated Facililty location - analysis using Mathematical Modeling | National Journal of Technology | Vol 9 No 2 17-23 | 2012 | |||
| 90 | Udhayakumar, P ; Kumanan, S | Some metaheuristic approaches for optimising tardiness of job and tool in a flexible manufacturing system | International Journal of Advanced Operations Management | Vol4,No.3: 219-252, 2012 | 2012 | |||
| 89 | Prasanna Venkatesan, S; Kumanan, S | Supply Chain Risk prioritazation using a hybrid MCDM approach | Advanced Materials Research | Vol 488-499: 406-410, 2012 | 2012 | |||
| 88 | Prasanna Venkatesan, S; Kumanan, S | A Multiobjective discrete particle swarm optimization algorithm for supply chain network design | International Journal of Logistics Systems and Management | Vol11: 375-406 | 2012 | |||
| 87 | Ilangkumaran, M; Kumanan, S | Application of Hybrid Vikor Model in selection of maintenace strategy | International Journal of Information system and supply chain managemenet | Vol.5,No.2: 59-81 | 2012 | |||
| 86 | Dev Anand, M; Selvaraj, T; Kumanan, S | Fault detection and Fault Tolerance methods for Industrial Robot Manipulators based on hybrid intelligent approach | Journal of Advances in Production Engineering and Management | No 7 :213-224 | 2012 | |||
| 85 | Udhayakumar, P; Kumanan,S | Integrated Scheduling of FMS using evolutionary algorithms | International of Advanced Manufacturing and Technology | Vol.61 No 5-8: 621-635 2012 | 2012 | |||
| 84 | Prasanna Venkatesan,S; Kumanan, S | Multi Objective Supply Chain Sourcing Strategy Design under Risk using PSO and Simulation | International Journal of Advanced Manufacturing and Technology | Vol 61, No 1-4: 325-337 2012 | 2012 | |||
| 83 | Prasanna Venkatesan, S; Kumanan, S | Supply Chain Risk Prioritization using a hybrid AHP and PROMOTHEE approach | International Journal of Services and Operations Management | V. 13, No 1, pp. 19-41 2012 | 2012 | |||
| 82 | Edwin Raja Dhas, J; Somasundaram Kumanan; Jesuthanam, C, P | Prediction of Weld Quality using intelligent decision making tools | Artificial Intelligence Research | Vol.11, No 2: 131-148 | 2012 | |||
| 81 | Dev Anand, M ; Selvaraj, T; Kumanan, S | Robotics in online inspection and quality control using moment algorithm | Journal of Advances in Production Engineering and Management | Vol 7: 27-38 | 2012 | |||
| 80 | Kumar, K; Kumanan, S | Decsion making in location selection : An Integrated Approach with clustering and Topsis | IUP Journal of Operations Management | Vol.11, No.1: 1-14 | 2011 | |||
| 79 | Ahilan, C; Kumanan, S; Sivakumaran, N | Optimization of CNC turning of AISI 304 Austenitic Stainless Steel using Grey Based Fuzzy logic with multiple performance characteristics | Journal of machining and forming Technologies | Vol 3,No 3-4(6): 231-250 | 2011 | |||
| 78 | Ahilan, C;Kumanan, S; Sivakumaran, N | Online Performance assessment of heat exchanger using artificial neural networks | International Journal of energy and environment (IJEE) | Vol 2, No5: 829-844 | 2011 | |||
| 77 | Sandeep, M ; Kumanan, S; Vinodh, S | Application of Fuzzy SMART approach for supplier selection | International Journal of Services and Operations Management | Vol 9, No.3: 365-388 | 2011 | |||
| 76 | Edwin Raja Dhas, J; Kumanan, S | Modelling of residual stress in Butt Welding | Materials and Manufacturing Processes | Vol. 26: 1-6 | 2011 | |||
| 75 | Edwin Raja Dhas, J; Kumanan, S | Optimization of Parameters for Submerged Arc weld using Non Conventional Techniques | Applied Soft Computing | Vol 11: 5198-5204 | 2011 | |||
| 74 | Sandeep, M; Kumanan, S; Vinodh, S | Supplier selection using combined AHP and GRA for a pump manufacturing industry | International Journal of Logistics Systems and Management | Vol 10, No.1: 40-52 | 2011 | |||
| 73 | Kumar, K; Kumanan, S | An Integrated Fuzzy QFD and AHP Approach for Facility Location Selection | IUP Journal of Supply Cahin Management | Vol.VIII No 4 Page 1-12 | 2010 | |||
| 72 | Edwin Raja Dhas, J; Kumanan Somasundaram | Weld residual prediction using Artificial neural networks and fuzzy logic modeling | Indian Journal of Engineering and Material science | Vol.18 351-360 | 2010 | |||
| 71 | Udhayakumar, P; Kumanan, S | Sequencing and scheduling of job and tool in a flexible manufacturing system using Ant Colony Optimization algorithm | International Journal of Advanced Manufacturing Technology | Vol.50: 1075-1084 | 2010 | |||
| 70 | Ahilan, C; Kumanan, S; Sivakumaran, N | Application of taguchi based grey relational analysis in multi objective optimization of turning process | Journal of Advances in Production Engineering and Management | Vol.5,No. 3: 171-180 | 2010 | |||
| 69 | Satheesh Kumar,R, M; Asokan, P; Kumanan, S, S | Artificial Immune System based algorithm to solve linear and loop layout problems in Flexible Manufacturing System | International Journal of Product Development | Vol 10 No.1-3: 165-179 | 2010 | |||
| 68 | Prasanna Venkatesan, S; Kumanan, S, S | Bicriteria allocation of customers to warehouses using a particle swarm optimisation | International Journal of Operational Research | Vol.9, No.1: 65-81,2010 | 2010 | |||
| 67 | Dev Anand, M; Selvaraj, T; Kumanan, S | A Neuro fuzzy based fault detection and fault tolerance methods for Industrial Robot Manipulators | International Journal of Adaptive and Innovative systems | Vol 1 3/4 334-371 | 2010 | |||
| 66 | Ahilan, C ; Kumanan, S; Sivakumaran ,N | Design and Implementation of an intelligent controller for a spilit air conditioner with energy saving | AMSE Journal of advances in Modeling,- Series C : Automatic control (AMSE) | 65(1) 21-40 | 2010 | |||
| 65 | J Edwin Raja Dhas ; Somasundaram Kumanan | Modelling and optimization of submerged arc welding process parameters using particle swarm optimization technique | International Journal of Enterprise Network Management | Vol. 4 Issue 2 154-165 | 2010 | |||
| 64 | Bobin Cherian Jos, S;Kumanan, S | Selection of partner companies in extended enterprise using fuzzy AHP | International Journal of services, economics and Management | Vol 2 3/4 322-339 | 2010 | |||
| 63 | Udhayakumar, P; Kumanan, S, S | Task Scheduling of AGV in FMS using Non traditional optimisation techniques | International Journal of Simulation Modelling | Vol.9, No.1: 28-39, 2010 | 2010 | |||
| 62 | Edwin Raja Dhas, J; Kumanan, S, S | Weld Quality Prediction of submerged arc welding process using a function replacing hybrid system | Journal of Advances in Production Engineering and Management | Vol.5, No1: 5-12, 2010 | 2010 | |||
| 61 | Edwin Raja Dhas J ; Somasundaram Kumanan | Effect of process Parameters in bead geometry and hardness in submerged arc weld on mild steel | National Journal of Technology | Vol.6 N 2:66 -74 | 2010 | |||
| 60 | Edwin Raja Dhas J; Somasundaram Kumanan, S | Neuro hybrid model to predict weld bead width in submerged arc welding process | Journal of Scientific and Industrial Research | Vol.66 N 4: 350-355 | 2010 | |||
| 59 | Leo Kumar, S, P; Kumanan,S ; Ahilan,C ; Mohan Kumar, R, S | Automation of blanking die desigh parameters selection using an intelligent system | Journal of Emerging technology in mechanical science and engineering | Vol.1 No.1 9-13 | 2010 | |||
| 58 | Kumanan,S ; Kumar, K ; Edwin Raja Dhas, J | Location selection- An Intergrated PSO with fuzzy clustering approach | Journal of Emerging technology in mechanical science and engineering | Vol.1 No.1 31-42 | 2010 | |||
| 57 | Satheesh Kumar, R, M, Asokan, P; Kumanan, S | Artificial Immune System based algorithm for unidirectional loop layout problem in Flexible Manufacturing System" | International Journal of Advanced Manufacturing and Technology | Volume 40, Numbers 5-6 553-565 | 2009 | |||
| 56 | Kumanan, S ; Raja, K | Multi Project scheduling using a Heuristic and Memetic algorithm | International Journal of Manufacturing science and Production | Vol 10 249-258 | 2009 | |||
| 55 | Dev Anand, M; Selvaraj,T ; Kumanan, S | A Neuro-Fuzzy Based Positioning System of Stationary Robot Manipulator Arm | International Journal of Information Intelligence and Knowledge | Vol 2 Issue 1 35-52 | 2009 | |||
| 54 | Ahilan, C.; Kumanan, S; Sivakumaran, N | Multiobjective optimization of CNC turning process using grey based fuzzy logic | International Journal of Machining and Machinability of materials | Vol 5 No.4 434-451 | 2009 | |||
| 53 | Ilangkumaran, M; Kumanan, S | Selection of maintenance policy for textile industry using hybrid Multicriteria Decision Making approach | International Journal of Manufacturing technolgy and management | volume 20, issue 7 -: 1009 - 1022 | 2009 | |||
| 52 | Prasanna Venkatesan, S; Kumanan, S ; Karthik, S | Multi-Criteria Decision Making in a Supply Chain Using a Genetic Algorithm | The Icfai University Journal of Supply Chain Management | Vol.6, No. 2: 67-82 | 2009 | |||
| 51 | Edwin Raja Dhas, J; Kumanan, S | Prediction of weld bead width in SAW of mild steel fuzzy logic system | Journal of Manufacturing engineering | Vol.4, Issue.3: 188-192 | 2009 | |||
| 50 | Dev Anand, M; Selvaraj, T; Kumanan, S; Austin Johnny, M | Application of multi criteria decision making for selection of robotic system using Fuzzy AHP | International Journal of Management and Decision Making | Vol 9 No.1 75-98 | 2008 | |||
| 49 | Kumanan, S;Jesuthanam,C,P; Ashok Kumar, R | Application of multiple regression and ANFIS for the prediction of surface roughness | International Journal of Advanced Manufacturing Technology | Vol. 35, n 7-8, 778-788 | 2008 | |||
| 48 | Dev Anand , M; Selvaraj, T; Kumanan, S | Fault Detection and Isolation in Robotic Manipulator via Hybrid Neural Networks, | International Journal of Simulation Modelling | Vol 1, 5-16 | 2008 | |||
| 47 | Satheesh Kumar, R, M ; Asokan, P ; Kumanan, S | Design of loop layout problem in Flexible Manufacturing System using non traditional optimization technique | International Journal of Advanced Manufacturing and Technology | Vol 38, No 5-6: 594-599 | 2008 | |||
| 46 | Kumanan,S; Raja, K | Modeling and Simulation of Projects with Petrinets | American Journal of Applied Science | 5 (12) 1742-1749 | 2008 | |||
| 45 | Kumanan, S ; Raja, K | Petrinets with Particle Swarm optimization technique for resource leveling | International Journal for Manufacturing science Production | Vol 9 No 3-4,193-202 | 2008 | |||
| 44 | Dev Anand , M; Selvaraj, T; Kumanan, S; Janarthanan, J | Fault Diagnosis System for a Robot Manipulator through Neuro Fuzzy Approach | International Journal of Modeling Identification and Control | Vol 3 (2): 181-192 | 2008 | |||
| 43 | Shyjit, K; Ilangkumaran, M; Kumanan, S | Multicriteria Decision Making approach to evaluate optimum maintenance strategy in textile industry | International Journal of Quality in Maintenance Engineering | Vol. 14, No.4, 375-386 2008. | 2008 | |||
| 42 | Satheesh Kumar, R ,M; Asokan, P; Kumanan, S; Varma, B | Scatter Search algorithm for single row layout in FMS | Journal of Advances in Production Engineering and Management | Vol 3 No 4 193-204 | 2008 | |||
| 41 | Dev Anand, M; Selvaraj,T; Kumanan, S | An Adaptive fuzzy logic approach for fault detection in Robot manipulators with parametric uncertainity | Manufacturing Technology Today | Vol.7 No.2:15-23 | 2007 | |||
| 40 | Shajahan, C, J; Kumanan, S | Modeling and Simulation of Product Development Process using Simquick | Manufacturing Technology Today | Vol.7(1)3-7 | 2007 | |||
| 39 | Dev Anand, M; Janarthanan, J; Selvaraj, T; Kumanan, S | A Hybrid Fuzzy Logic and Artificial Neural Networks Algorithm Based Fault Detection and Isolation for Industrial Robot Manipulators | International Journal of Manufacturing Research | V2 N0 3 279-302 | 2007 | |||
| 38 | Kumanan,S; Jesuthanam,C, P; Ashok Kumar, R | Application Of Multiple Regression and the development of a Predictive Neural Network Trained By Genetic Algorithm For Machining Quality Prediction | International journal of Manufacturing science and Technology | Vol 10 No 2 85-96 | 2007 | |||
| 37 | Udhayakumar, P; Kumanan, S; Asokan, P | Job And Tool Sequencing In Flexible Manufacturing System Using A Particle Swarm Optimization Technique | International Journal of Manufacturing science and Technology | vol 9 No 2 p.55-66 | 2007 | |||
| 36 | Dev Anand, M;Selvaraj, T; Kumanan, S; Austin Johnny, M | Identification and Specification Of Robot Kinematic Parameters Using Artificial Neural Networks | International Journal for Manufacturing Science and Technology | Vol 9 No 2,33 -46 | 2007 | |||
| 35 | Chandrasekaran, M; Asokan, P; Kumanan, S; Arunachalam, S | Application of selective breeding algorithm for job shop scheduling problems | International Journal for Manufacturing Science and Technology | Vol 9 No 1 103- 118 | 2007 | |||
| 34 | Chandrasekaran, M; Asokan, P; Kumanan, S; Umamaheswari, S; Rao, C,S,P | Multi Objective Optimization for Job shop scheduling using Sheep Flocks Heredity Model Algorithm | International Journal of Manufacturing Science and Technology | Vol 9 No 2 p.47 -54 | 2007 | |||
| 33 | Moorthy, P, S, S; Kumanan, S; Pradeep Kumar, V | Delinquency Stage Prediction using Markov Processes and Logistic Regression | International Journal of applied Management | Tech.170-181 V5 | 2007 | |||
| 32 | Raja, K; Kumanan, S | Resource Leveling using Petrinet and Memetic Approach | American Journal of Applied Science | 4 (5) 317-322 | 2007 | |||
| 31 | Kumanan, S; Edwin Raja Dhas, J.; Ashok Kumar, R | Development of Welding Residual Stress Predictor using a Function-Replacing Hybrid System | International Journal of Advanced Manufacturing Technology | Vol.31, No 11-12:1083?1091 | 2007 | |||
| 30 | Kumanan,S; Prasanna Venkatesan, S; Prasanna Kumar, J | Optimization of supply chain logistics network using random search techniques | International Journal of Logistics Systems and Management | Vol 3, No.2: 252-266 | 2007 | |||
| 29 | Siva Sankar,R; Asokan, P; Saravanan, R; Kumanan, S; Prabhaharan, G | Selection of machining parameters for constrained machining problem using evolutionary computation | International Journal of Advanced Manufacturing Technology | 892 ? 901, Vol 32 9-10 | 2007 | |||
| 28 | Jesuthanam, C,P; Kumanan, S; Asokan, P | Surface roughness prediction using hybrid neural network | Machining Science and Technology | Vol 11 Issue 2: 271-286 | 2007 | |||
| 27 | Edwin Raja Dhas, J; Kumanan, S | ANFIS for prediction of weld bead width in Submerged Arc Welding Process. | Journal of Scientific and Industrial Research | Vol.66 No.4:335-338 | 2007 | |||
| 26 | Kumanan, S; Edwin Raja Dhas, J; Gowthaman, J | Determination of SAW process parameters using taguchi method and regression analysis | Indian Journal of Engineering and Material science | Vol.14:103-111 | 2007 | |||
| 25 | Christu Paul, R; Asokan,P; Kumanan, S | Facility Layout Design Using Particle Swarm Approach | Manufacturing Technology Today | Vol.6 No.7: 23-28 | 2007 | |||
| 24 | Nanne sahib, S,K ; Kumanan, S | Modeling Of Hot Extrusion Process Using Artificial Neural Networks Implanted With Genetic Algorithm | Journal of Manufacturing Engineering | Vol.2, Issue.4 | 2007 | |||
| 23 | Jesuthanam, C, P; Kumanan, S | Prediction of surface roughness in turning using RBFNN-FL technique | Manufacturing Technology Today | Vol.6 No.5 :22-26 | 2006 | |||
| 22 | Edwin Raja Dhas, J; Kumanan, S | Prediction of weld bead geometry in SAW using regression method | Manufacturing TechnologyToday | Vol.6 No.11: 31-34 | 2006 | |||
| 21 | Kumanan, S; Krishnaiah Chetty, O, V | Estimating Product Development Cycle Time using Petrinets | International Journal of Advanced Manufacturing Technology | 28(1-2):215-220 | 2006 | |||
| 20 | Dev Anand, M; Selvaraj, T; Kumanan, S; Austin Johnny, M | Path optimization algorithm for an autonomous mobile Robot | International Journal of Applied Management Technology | V4 No 2 149-161 | 2006 | |||
| 19 | Kumanan, S; Babu, M; Shajahan, C,A | Modeling, Simulation and Analysis of Product Development Process Using MSEXCEL | Int Jrl applied Management Tech. | V4 No 2 125-139 | 2006 | |||
| 18 | Chandrasekaran, M; Asokan, P; Kumanan, S;Balamurugan, T | Sheep Flocks Heredity Model Algorithm for Solving Job Shop Scheduling Problems | International Journal of Applied Management and Technology | Vol 4 No 1 pp 79-100 | 2006 | |||
| 17 | Kumanan, S;Jegan Jose, G, Raja, K | Multi-Project Scheduling using a Heuristic and a Genetic Algorithm | International Journal of Advanced Manufacturing Technology | v31 3-4 p360-366 | 2006 | |||
| 16 | Satishkumar, S; Asokan, P; Kumanan, S | Optimization Of Depth Of Cut In Multipass Turning Using Nontraditional Optimization Techniques | International Journal of Advanced Manufacturing Technology | V29 N3-4 232-238 | 2006 | |||
| 15 | Kumanan, S; Prasanna Venkatesan, S; Kumar, K; Prasanna Kumar, J | Performance Analysis Of Supply Chain Logistics Network using Genetic Algorithm and Simulation | International Journal Agile Systems and Management | V1 N4 450-462 | 2006 | |||
| 14 | Chandrasekaran, M; Asokan, P; Kumanan,S; Balamurugan, T; Nickolas, S | Solving Job Shop Scheduling Problem using artificial immune system | International Journal of Advanced Manufacturing Technology | V31 N 5-6 580-593 | 2006 | |||
| 13 | Srinivasa Raman, V; Barathi Raja,K; Asokan, P; Kumanan, S | Meta heursitic approach for multi objective gear box optimization | Manufacturing Technology Today | Vol.1, No.1: 29-39 | 2006 | |||
| 12 | Kumanan, S; Prasanna Venkatesan, S; Balakumaran, S | Multi objective optimization of supply chain logistics network using a genetic algorithm | Journal of Management Research | Vol.1 No.3: 43-53 | 2006 | |||
| 11 | Srinivasa Raman, V; Barathi Raja, K ; Asokan, P; Kumanan, S | Multi Speed Gear Box Design using Swarm intelligence | Manufacturing Technology Today | Vol.5:14-19 | 2006 | |||
| 10 | Ravi Kumar, R; Narendar Singh, N; Asokan, P; Kumanan, S | Optimisation of Parameters in Electric Discharge Machining using Genetic Algorithm | Manufacturing Technology Today | Vol.5:12-14 | 2006 | |||
| 9 | Kumanan,S; Nanne saheb, S, K; Jesudhanam, C,P | Prediction of Machining Forces using Neural networks trained by Genetic Algorithm | Journal of Institution of Engineers (India) | Vol.87: 11-15 | 2006 | |||
| 8 | Udhayakumar, P; Kumanan, S; Asokan, P | Routing and Dispatching of Automated Guided Vehicles in a Flexible Manufacturing Systems using Simulated Annealing Algorithm | Manufacturing Technology Today | Vol.5 5-8 | 2006 | |||
| 7 | Asokan, P; Kumanan, S; Sathish Kumar, S | Selection of optimal conditions for CNC multi-pass face milling system using evolutionary computation | Manufacturing Technology Today | Vol.5: 26-30 | 2005 | |||
| 6 | Kumanan, S; Edwin Raja Dhas, J;Murugan, N | Welding Process control and optimization | Welding Journal | IWS :19-27 | 2005 | |||
| 5 | Kumanan, S; Prasanna Venkatesan, S; Prasanna Kumar, J | A Genetic Algorithm for Optimization Of Supply Chain Logistics Network | International Journal of Applied Management and Technology | 3 (2): 41-51 | 2005 | |||
| 4 | Siva Sankar, R ; Asokan, P; Kumanan,S; Selvaraj,T | Adaptive Genetic Algorithm Approach For Optimization Of Multi Pass Turning Operations | Manufacturing Technology Today | Vol.4,No.5:12-16 | 2005 | |||
| 3 | Kumanan, S; Prasanna Kumar, J; Kumar, K | Facility Location in a Supply Chain Network using Microsoft Excel | Productivity | Vol.46,.2-3: 346-350 | 2004 | |||
| 2 | Kumanan, S;Prasanna Venkatesan, S | Supply Chain Simulation using Excel | Industrial Engineering journal | Vol.34 (11):10-11 | 2004 | |||
| 1 | Prashant Reddy, J; Kumanan, S; Krishnaiah Chetty, O,V | Application of Petrinets and a genetic algorithm to multi mode multi resource constrained Project Scheduling | International Journal of Advanced Manufacturing Technology | V17 305-314 | 1998 |
[GO TO Dr KUMANAN SOMASUNDARAM HOME PAGE
