|
Dr. M. ASHOK Professor Department of Physics National Institute of Technology Tiruchirappalli- 620015 |
|
|
Telephone (Direct) |
0431 250 3610 |
|
Mobile |
|
|
Email (Primary) |
ashokm(at)nitt.edu |
|
|
|
|
Specialization: |
Material Science |
|
Research Areas of Interest: |
Nano Materials and Application, NDE- Ultrasonic Testing |
Academic Identity: |
PhD Anna University Chennai Tamil Nadu India (2003).
Research Project Title of Project Funding Agency Duration Status From To Ongoing/ Completed Nano-Porous Hydroxyapatite Nano-composite for Tissue Engineering Applications DST 2006 2010 Completed "Surface Modification of Biodegradable Magnesium Alloys by Plasma Electrolytic Processing for Orthopaedic Implant Applications" (as Co- Investigator) (Dr.N. Ramesh Babu, MME, NITT is the PI ) DST 2012 2015 Completed “Development of High Surface Area, Microporous Plasma Electrolytic Oxide Layers on Commercially Pure Titanium as Promising Systems for Photocatalytic Applications” (as Co- Investigator) (Dr.N. Ramesh Babu, MME, NITT is the PI ) DST-SERB EMR/2016/003259 2017 Completed “Development of nanostructured Titanium implants with bioactive antibacterial composite coating for dental and maxillofacial application (Co- Investigator) (Dr.N. Ramesh Babu, MME, NITT is the PI ) DST 2019 Completed Student Guided Name of the Scholar Title of Thesis Year of Award/submission Ph.D Dr. P. Michael Sahaya Lucy Shanthi Synthesis and Characterization of Mesoporous Nano Hydroxyapatite for bone specific drug and other bio application 08/02/2013 Dr. Pradeep Reddy Vanga Multiferroic and Photocatalytic properties of pure and modified BiFeO3 synthesized by various methods 10/06/2016 Dr. K. Vijaya Sankar Preparation and study of PbBi2Nb2O9 based visible light active photocatalysts for organic pollutant dye degradation 12/02/2021 Dr. M. Helen Selvi Photocatalytic and anti-microbial
activities of Bi2WO6 nano-plate structure synthesized by hydrothermal
method 15/04/2021 Dr. Harinee S. Green synthetic nanocomposite activities on photocatalytic and anti-microbial applications 28/7/2022A FN Dr. R. Gomathi Characterization Of Wall Loss Defect in Glass Fibre Reinforced Polymer Curved Composite Through Pulsed and Lock-In Thermal Non-Destructive Evaluation 28/07/2022 AN Dr. Biny R Wiston Design and development of transition metal hydroxides for energy storage application 18.05.2023 Dr. Dhivyaprasath K Investigation on Organometallic Halide Perovskites and Metal-Based Hole Transport Layers For Solar Cell Application 23/07/2024 M.S By Research S. Adalarasu Contrasting characteristics of guided waves and its practical implications on flaw detection 06/2015 M.Tech Anil Chand .B Rayleigh wave generation and velocity measurements in pipes 12/2007 Dhara Bharghavi .R (M.Tech) Experimental studies in air coupled ultrasonics for composites and its application to defect detection in through transmission and guided wave configurations 06/2007 G. Meganathan (M.Tech) Mapping of field distribution in magnetic particle testing 01/2007 M. Ausuya (M.Tech) Ultrasonic spectroscopy and characterization of materials 12/2007 Anil Chand .B (M.Tech) Rayleigh wave generation and velocity measurements in pipes 05/2008 V. Satya Pavan Kumar (M.Tech) Inspection of corrosive resistant alloy clad pipe girth welds using phased array technique 05/2009 Dasari Sreenu (M.Tech) Detection of pitting corrosion in austenitic stainless steels using eddy current method 05/2010 Ashok Kumar Mahankali (M.Tech) Testing of composite cylindrical structures using lamb waves generated by air coupled ultrasonics 12/2010 Anil Kumar Anumula (M.Tech) Ultrasonic C-scan imaging of commercially pure Aluminum friction welds 12/2011 Ashok Kumar Mahankali (M.Tech) Testing of composite cylindrical structures using lamb waves generated by air coupled ultrasonics 05/2011 Anil Kumar Anumula (M.Tech) Defect detection in aluminum plates using infrared thermography 05/2012 Sreerag. T (M.Tech) Full matrix capture and total focusing method of phased array ultrasonics using MATLAB 12/2012 Thilak S (M.Tech) Creep damage assessment by advanced ultrasonics 12/2013 Sreerag T (M.Tech) Technique for imaging using virtual array of source with full matrix capture and total focusing method of phased array ultrasonic by using MATLAB 05/2013 Ramnayak Khatravath (M.Tech) Investigation of carburization in austenitic stainless steel using electromagnetic non-destructive evaluation techniques 12/2013 K. Pavithra (M.Tech) Effect of Ba and Ca substitution in A-site of bismuth ferrite 05/2013 Thilak S (M.Tech) Creep damage assessment by advanced ultrasonics 05/2014 Ramnayak Khatravath (M.Tech) Evaluation of residual stresses in steel using electromagnetic non-destructive techniques 05/2014 Nikhil VP (M.Tech) Defect characterization using ultrasonic C-scan imaging over corroded surface 05/2015 Aniket Kumar Tiwary (M.Tech) Material characterization of Al-alloys by non-destructive testing techniques 12/2015 Sooraj Rajan N R (M.Tech) Development of an ARDUINO based robot for online pipeline monitoring 05/2015 Aniket Kumar Tiwary (M.Tech) Material characterization of Al-alloys by non-destructive testing techniques 05/2016 Angad Dashrathrao Acharya (M.Tech) Inspection of tungsten inert gas welding sample by using thermography imaging 05/2016 Mycharla Thathaji (M.Tech) Conventional and phased array ultrasonic testing of austenitic stainless steel weld joints with natural defects 12/2016 Adirae Dinesh (M.Tech) Non-destructive evaluation of friction stir welded dissimilar aluminum alloys 12/2016 M.Sc V. Kesava reddy INKJET printing of materials on flexible substrates 12/2008 S. Aravind INKJET Printing of materials and pattern making 05/2010 Ilavenil. R Synthesis and characterization of CuO and CdO by inorganic templating method 05/2010 Yesu Raja V Synthesis and characterization of Co2Feo4 nanoparticles by CO-precipitation method 05/2012 Nivetha C Sonochemical synthesis and characterization of Bi1-x Dyx FeO3 05/2014 D.M. Lakshmipriyaa Optical properties and photocatalytic activity of Bi1-x Prx PO4 05/2014 Shanthini I Synthesis and characterization of BiFeo3 /AC nanocomposite 05/2016 Harinee. S Synthesis and characterization of BiPO4 -ZnO composites 05/2016 Shanmuga Deepika. S Biocompatible chitosan film coated on PSAN Fibers for wound dressing by COCAM 05/2017 Sowndharya P Preparation of PSAN Fiber coated with Gelatin having Antimicrobial activity 05/2017 CRC Press eBook ISBN9781003340539.
EDUCATION
EXPERIENCE
AREA OF INTERESTS
Materials Science Biomaterials
Energy and Environmental Engineering
HONOURS
BOOKS EDITED
BOOKS CHAPTER
Pages 33
Book : Energy Harvesting and Storage Devices: Sustainable Materials and Methods
edited by Dr. Laxman Raju Thoutam,; Dr. J. Ajayan, ; Dr. D. Nirmal,
Edition 1st Edition, First Published 2023
Imprint CRC Press.
Pages 923-934
Book : Energy Harvesting and Storage Devices: Sustainable Materials and Methods
edited by Mohammad Reza Rahimpour
Encyclopedia of Renewable Energy, Sustainability and the Environment (First
Edition), Elsevier, 2024,
