Dr. Matruprasad Rout


Matruprasad Rout, PhD

Assistant Professor
Department of Production Engineering
National Institute of Technology Tiruchirappalli
Tamil Nadu, 620015, India

Email: matruprasad@nitt.edu

Phone: 0431-2503633
 

Website: matruprasad

 

 

Area of Interest


  • Metal Forming
  • High-temperature Deformation
  • Recrystallization
  • EBSD
  • FE Modelling of Bulk Metal Forming Processes

 

Professional Experience


  • Assistant Professor: Department of Production Engineering, National Institute of Technology Tiruchirappalli, Tamil Nadu, 620015, India (May 2020 to Present)
  • Assistant Professor: School of Mechanical Engineering, KIIT Deemed to be University, Bhubaneswar, 751024, India (July 2018 to May 2020)

 

Academic Details


  • Ph.D. (2018): Indian Institute of Technology Kharagpur
  • M.Tech. (2011): National Institute of Technology Rourkela
  • B.Tech. (2009): Biju Patnaik University of Technology, Odisha

 

Publications


 

International Journals:

  1. Park, Jinheung, Rout, Matruprasad, Min, Kyung-Mun, Chen, Shuai-Feng, Lee, Myoung-Gyu, A fully coupled crystal plasticity-cellular automata model for predicting thermomechanical response with dynamic recrystallization in AISI 304LN stainless steel, Mechanics of Materials, 167, 2022, 104248. https://doi.org/10.1016/j.mechmat.2022.104248
  2. Mahto, Raju Prasad, Rout, Matruprasad, Pal, Surjya K., Mechanism of microstructure evolution and grain growth in friction stir welding of AA6061-T6 and AISI304 in air and water media, Materials Chemistry and Physics, 273, 2021, 125081. https://doi.org/10.1016/j.matchemphys.2021.125081
  3. Rout, Matruprasad, Singh, Shiv B., Pal, Surjya K., Texture development in 304LN austenitic stainless steel during post-hot-axisymmetric compression, Institute of Mechanical Engineers Part B: Journal of Engineering Manufacture, 235, 2021, 1131-1143. https://doi.org/10.1177/0954405420978036
  4. Rout, Matruprasad, Texture-tensile properties correlation of 304 austenitic stainless steel rolled with the change in rolling direction, Materials Research Express, 7, 2020, 016563. https://doi.org/10.1088/2053-1591/ab677c
  5. Rout, Matruprasad, Singh, Shiv B., Pal, Surjya K., Microstructure and texture evolution in austenitic stainless steel during low strain rate deformation at elevated temperature, International Journal of Material Forming, 13, 2020, 605-621. https://doi.org/10.1007/s12289-019-01500-8
  6. Rout, Matruprasad, Biswas, Somjeet, Ranjan, Ravi, Pal, Surjya K., Singh, Shiv B., Deformation behavior and evolution of microstructure and texture during hot compression of AISI 304LN stainless steel, Metallurgical and Materials Transaction A, 49, 2018, 864-880. https://doi.org/10.1007/s11661-017-4447-5
  7. Rout, Matruprasad, Ranjan, Ravi, Pal, Surjya K., Singh, Shiv B., EBSD study of microstructure evolution during axisymmetric hot compression of 304LN stainless steel, Materials Science and Engineering A, 711, 2018, 378-388. https://doi.org/10.1016/j.msea.2017.11.059
  8. Rout, Matruprasad, Pal, Surjya K., Singh, Shiv B., Prediction of Edge Profile of the Plate during Hot Cross Rolling, Journal of Manufacturing Processes, 31, 2018, 301-309. https://doi.org/10.1016/j.jmapro.2017.11.024
  9. Rout, Matruprasad, Pal, Surjya K., Singh, Shiv B., Finite Element Simulation of a Cross Rolling Process, Journal of Manufacturing Processes, 24, 2016, 283-292. https://doi.org/10.1016/j.jmapro.2016.09.012
  10. Rout, Matruprasad, Pal, Surjya K., and Singh, Shiv B., Finite Element Analysis of Cross Rolling on AISI 304 Stainless Steel: Prediction of Stress and Strain Fields, Journal of the Institute of Engineers (India): Series C, 98, 2017, 27-35. https://doi.org/10.1007/s40032-016-0239-8

 

Book Chapters (Invited):

  1. Murugabalaji, V., Rout, Matruprasad, Debnath, Kishore, Tensile Properties and Anisotropy of Cross-Rolled Sheets: An Overview, in Metal Forming Processes: Developments in Experimental and Numerical Approaches (1st ed.). by Marotrao, K.G., Agrawal, A., & Kumar, D.R. (Eds.). CRC Press, Chapter 10, pp. 169-182, 2022. https://doi.org/10.1201/9781003226703 (ISBN: 9781003226703 (ebook))
  2. Murugabalaji, V., Rout, Matruprasad, Introduction to Cross Rolling of Biomedical Alloys, in Advanced Materials for Biomechanical Applications by Kumar, A., Ram, M., & Singla, Y. K. (Eds.)., CRC Press, Boca Raton, Chapter 2, pp 15-27, 2022. https://doi.org/10.1201/9781003286806-2 (ISBN: 9781003286806 (ebook))
  3. Rout, Matruprasad, Pal, Surjya K., Singh, Shiv B., Finite element modeling of hot rolling: steady and unsteady state analyses, in Computational Methods and Production Engineering, by J. P. Davim (Editor), Wood Head (Elsevier), Cambridge, Chapter 4, pp. 83-124, 2017. http://dx.doi.org/10.1016/B978-0-85709-481-0.00004-5 (ISBN: 9780857094827 (ebook))
  4. Rout, Matruprasad, Pal, Surjya K., Singh, Shiv B., “Cross Rolling: A Metal Forming Process”, in Modern Manufacturing Engineering: Research, development and education, by J. P. Davim (Editor), Springer International Publishing, Switzerland, Chapter 2, pp. 41-64, 2015. https://doi.org/10.1007/978-3-319-20152-8_2 (ISBN 978-3-319-20152-8 (ebook))

 

Book Chapters (Conference):

  1. Rout, Matruprasad, Singh, Shiv B., Ranjan, Ravi, Pal, Surjya K., Microstructure and texture study of high temperature upset forged 304LN stainless steel in Recent Advances in Manufacturing Processes, Lecture Notes in Mechanical Engineering, Renu Kumari et al. (Eds):, Springer Singapore, Chapter 9, pp 113-122, 2021 https://doi.org/10.1007/978-981-16-3686-8_9 (ISBN: 978-981-16-3685-1)
  2. Behera, Bikash C., Rout, Matruprasad, Mondal, Arpan Kumar, Assessment of bio-dielectric calophyllum inophyllum (polanga) oil in electro-discharge machining: A step toward sustainable machining in Next Generation Materials and Processing Technologies. Springer Proceedings in Materials, vol 9, Bag S., Paul C.P., Baruah M. (Eds). Springer, Singapore, Chapter 20, pp 265-275, 2021 https://doi.org/10.1007/978-981-16-0182-8_20 (ISBN: 978-981-16-0182-8)

 

International Conferences:

  1. Jinheung Park, Matruprasad Rout, Kyung Mun Min, and Myoung-Gyu Lee, Multiscale modeling for predicting dynamic recrystallization behavior of stainless steel under thermo-mechanical process, Asia Steel International Conference, Gyeongju, Korea, December 05-09, 2021.
  2. Kumre, Abhishek Kumar, Shrivastava, Ashvin, Mishra, Mayank, Rout, Matruprasad, Neural network based flow curve modeling of high-nitrogen austenitic stainless steel, International Conference on Progressive Research in Industrial & Mechanical Engineering (PRIME) National Institute of Technology Patna, India, August 5-7, 2021
  3. Jinheung Park, Matruprasad Rout, Kyung Mun Min, Shuaifeng Chen and Myoung-Gyu Lee, Modeling dynamic recrystallization of stainless steel in the coupled crystal plasticity and cellular automata approach, 9th International Conference on Tube Hydroforming (TUBEHYDRO 2019), Kaohsiung, Taiwan, November 18-21, 2019.
  4. Rout, Matruprasad, Singh, Shiv B. and Pal, Surjya K., Characterization of post-hot-deformation annealing twins developed in 304LN austenitic stainless steel, Asia Steel International Conference, Bhubaneswar, India, February 6-9, 2018.
  5. Rout, Matruprasad, Ranjan, Ravi, Pal, Surjya K. and Singh, Shiv B.; “Study on Static Recrystallisation Behaviour of 304LN Stainless Steel by Two-Stage Compression Test”, Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), CoE, Pune, India, pp 1007- 1011, December 16-18, 2016. (ISBN: 978-93-86256-27-0)
  6. Rout, Matruprasad, Pal, Surjya K., Singh, Shiv B. and Biswas, Somjeet; “Evolution of Microstructure and Texture in 304 Austenitic Stainless Steel by Two Different Modes of Hot Rolling”, Proceedings of the International Conference on Advances in Materials and Manufacturing, (ICAMM), Hyderabad, India, pp 411- 416, December 08-10, 2016. (e-ISBN: 978-93-86256-19-5)
  7. Rout, Matruprasad, Krishna, K. Sai, Pal, Surjya K. and Singh, Shiv B., Experimental study of plastic anisotropy in hot cross rolling, 2nd International Conference on Rolling & Finishing Technology of Steel (RAFTS), SAIL, RDCIS, Ranchi, India, September 08-10, 2015, Iron & Steel Review, Sep. 2015, Vol. 59 No. 4, pp 155-158.
  8. Rout, Matruprasad, Pal, Surjya K., and Singh, Shiv B., “Finite Element Analysis of Cross Rolling on AISI 304 Stainless Steel: Prediction of Stress and Strain Fields”, Proceedings of the 5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR), IIT Guwahati, pp 487-1-487-6, December 12-14, 2014. (ISBN: 978-8-19274-612-8)
  9. Rout, Matruprasad, Pal, Surjya K., and Singh, Shiv B., “Numerical Simulation of Temperature Field of AISI 316L Stainless Steel during Cross Rolling”, Proceedings of the International Conference on Innovation in Design, Manufacturing and Concurrent Engineering (IDMC), NIT Rourkela, pp 81-84, March 01-03, 2014.
  10. Rout, M. P., Sahoo, S. K., Patra, L.N., Behera, B. C. and Kanaujia, K. K., Flow Behavior of Aluminum Alloy during Warm Upset Forming, 5th International Conference on Advances in Mechanical Engineering (ICAME-2011), S.V. National Institute of Technology, Surat, India, pp. 631-635, June 06-08, 2011 
  11. Kanaujia, K. K, Rout, M. P, Behera, B. C., Sahoo, S. K. and Maharana B. K., Optimization of Tensile Strength of AISI304 Stainless Steel and Copper using Nd:YAG Laser Welding, 5th International Conference on Advances in Mechanical Engineering (ICAME-2011), S.V. National Institute of Technology, Surat, India, pp. 616-620, June 06-08, 2011.

 

National Conferences:

  1. Rout, Matruprasad, Singh, Shiv B., Ranjan, Ravi and Pal, Surjya K., Microstructure and texture study of high temperature upset forged 304LN stainless steel, National Online Conference on Research and Developments in Material Processing, Modelling and Characterization, National Institute of Technology Jamshedpur, India, August 26-27, 2020

 

Professional Membership


  • Associate Member of The Institution of Engineers India (IEI)
  • Member of Electron Microscope Society of India (EMSI)

 

Reviewer


  • Metallurgical and Materials Transaction A
  • Materials Research Express
  • Journal of Quality & Reliability Management
  • Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
  • Advances in Materials and Processing Technologies
  • Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
  • Materials Today: Proceedings
  • Journal of the Brazilian Society of Mechanical Sciences and Engineering
  • Materials Science and Engineering A

 

Research Profiles


 

Contact Details


Dr. Matruprasad Rout
Room No. 116
Ground Floor, OJAS
National Institute of Technology Tiruchirappalli
Tamil Nadu, 620015, India