1) B.Ravisankarand K.A.Padmanabhan "On the hot pressing of YBa2Cu3O7-x" - Journal of Material Science Letters,Vol. 14 (1995), pp1777 - 1780.Impact factor: 0.68
2) B.Ravisankar, S SRamakrishnan and P C Angelo " On Diffusion Bonding of Ti-6Al-4V" - Trans.IIM, V 55 (2003), N 3, pp 105-114. Impact factor: 0.502
3) B.Ravisankar and JoongKeun Park " ECAP of Commercially Pure Titanium: A Review" - Trans.IIM - V 61 (2008), N 1,February 2008, pp 51-62. Impact factor: 0.502
4) B.Ravisankar, J.Krishnamoorthi, S SRamakrishnan and P C Angelo, “ Diffusion bonding of SU 263”. Journal of Materials Processing Technology, 2 0 9 ( 2009 ) 2135–2144Impact factor: 2.359
5) B.Prabha, P.Sundaramoorthy, S.Suresh, S.Manimozhi, B.Ravisankar, “Studies on Stress-corrosion cracking of super 304H Austenitic stainless steel” Journal of Materials Engineering Performance, Springer, Available on line from December 2009.
6) D. Devaiah, P. Venkatachalam, S. Ramesh Kumar and B. Ravisankar, “Effect of Two Directional Cold and Cryo Rolling on Mechanical Properties of 5083 Al Alloy” International Journal of Materials Science, Vol 5 (1) 2010 17-22 Impact factor: 2.302
7) P. Venkatachalam, B. Ravisankar and S. Kumaran, “Microstructure and mechanical properties of 2014 Al alloy processed by equal channel angular pressing (ECAP)” Int. J. Microstructure and Materials Properties, Vol. 5, No. 1, 2010 88-100. Impact factor: 0.45
8) DevaiahDoppalapudi, P.Venkatachalam, S.Ramesh Kumar, B.Ravisankar and K.Jayashankar, “Improving the mechanical properties of 2024 al alloy by cryo rolling” Trans IIM, V 63, Issue 1, February 2010 pp 31-34. Impact factor: 0.502
9) S.Jerome, B.Ravisankarand S.Natarajan, “Synthesis and evaluation of mechanical and high temperature tribological properties of in-situ al-TiC composites” Tribology International, V43, 2010, pp 2029-2036. Impact factor: 2.259
10) P. Venkatachalam, S.Ramesh Kumar, B. Ravisankar, V. Thomas Paul and M. Vijayalakshmi, “Investigations on the Effect of Processing Routes on Microstructure and Mechanical properties of 2014 Al alloy processed by Equal Channel Angular Pressing (ECAP)” Transactions of Nonferrous Metals Society of China, V 20 (2010) 1822-1828. Impact factor: 1.454
11) MeenuSrivastava, J.N.Balaraju, B.Ravisankar, K.S.Rajam, “Improvement in the properties of nickel by nano-Cr2O3 incorporation" Surface and Coatings V 205, (2010), pp 66–75. Impact factor: 2.139
12) RamuYarra, P.Venkatachalam, S.Ramesh Kumar, B.Ravisankar, K.Jayasankarand P.S. Mukherjee, “Densification Of Al-Y2O3 Composite Powder By Equal Channel Angular Pressing” Transactions of Indian Institute of Metals, V 63 2010, pp. 813 - 817Impact factor: 0.502
13) Ramesh Kumar S, KondiahGudimetla, P.Venkatachalam and B.Ravisankar, “ Stress corrosion cracking of Al 7075 alloy processed by equal channel angular pressing”, International Journal of Engineering, Science and Technology, V 2 No 12, 2010 pp 53-61. Impact factor: 0.489
14) K.Manikanda Subramanian P.Chandramohan and B.Ravisankar, ”Influence of texture on the mechanical properties of hot rolled duplex stainless steels” Trans IIM, V 64, Issue 6, 2012 pp 519-534. Impact factor: 0.502
15) P. Venkatachalam, Shibayan Roy, B.Ravisankar, V. Thomas Paul,M. Vijayalakshmi, Satyam Suwas, “Texture Evolution in an Al-Cu alloy during Equal Channel Angular Pressing: The effect of Starting Microstructure”- J Material Science (2011) 46:6518–6527 DOI 10.1007/s10853-011-5598-1
16) S.Ramesh Kumar and B.Ravisankar, “Scaling Up of Equal Channel Angular Pressing Simulation Using Deform 3D”- International Journal of Advances in Science and Technology, Vol 2, Num 4, April 2011 pp 88-95 Impact factor: 1.016
17) M. S. SenthilSaravanan, S. P. KumareshBabu,K. Sivaprasad,B. Ravisankar, P. Susila and B.S.Murty, “Consolidation of CNT-reinforced AA4032 nanocomposites by ECAP” International Journal of Nanoscience Vol. 10, No. 1 & 2 (2011) pp 233-236. Impact factor: 0.633
18) S. Jerome, Ashish Kumar, S. P. KumareshBabu and B. Ravisankar, “Studies on Mechanical Properties and Wear Behaviour of in situ Al-TiC Composites”, Advanced Materials Research Vols. 328-330 (2011) pp 1654-1658. Impact factor: 0.43
19) Ramesh Kumar S, KondaiahGudimetla, Venketachalam P, Ravisankar B, Jayasankar K, “Microstructural and Mechanical Properties of Al 7075 alloy processed by Equal Channel Angular Pressing”- Materials Science and Engineering A Vol.A 533 (2012) pp. 50– 54 Impact factor: 2.959
20) PerumalVenkatachalamShibayan Roy, V. Thomas Paul, M. Vijayalakshmi, BalasubramanianRavisankarand Satyam Suwas, “The Role of Processing Routes on the evolution of Microstructure and Texture Heterogeneity during ECAP of Al-Cu Alloy” Materials Science Forum Vols. 702-703 (2011) pp 113-118. Impact factor: 0.49
21)Nishtha Gupta , S.Ramesh Kumar , B.Ravisankar and S.Kumaran, “Consolidation of Al-2024 Powder by Conventional P/M Route and ECAP – A Comparative Study” World Academy of Science, Engineering and Technology Vol. 61 (2012) PP 1067-1070. Impact factor: 0.2
22) PerumalVenkatachalamShibayan Roy, V. Thomas Paul, M. Vijayalakshmi, BalasubramanianRavisankarand Satyam Suwas , “Effect of processing routes on the evolution of texture heterogeneity in 2014 Aluminium alloy deformed by equal channel angular pressing (ECAP)” Accepted in Materials Science and Technology, Appeared or available online: 11 May 2012 DOI: 10.1179/1743284712Y.0000000045
23) Nishtha Gupta, B.Ravisankar,S.Kumaranand T.SrinivasaRao, “Densification of Al-2024 and Al-2024/Al2O3 Powders by Conventional P/M Route and ECAP – A comparative study” Trans. IIM Volume 65, Issue 4 (2012), Page 381-386. Impact factor: 0.502
24) J.Krishnamoorthi , V.Balusamy, P C Angelo , R.Vinothkumar, and B.Ravisankar” Diffusion Bonding of Ti-6Al-4V alloy with Inconel 718” European Journal of Scientific Research Vol.83 No.2 (2012), pp.221-229. Impact factor: 0.736
25) MeenuSrivastava, J.N. Balaraju, B. Ravisankar, C. Anandan,andV.K. William Grips, “High temperature oxidation and corrosion behaviour of Ni/Ni–Co–Al composite coatings” Applied Surface Science, Vol 263 (2012) pp 597-607. Impact factor: 3.38
26) MeenuSrivastava, J.N. Balaraju, B. Ravisankar, and V.K. William Grips, “Comparison in the Oxidation and Corrosion Behavior of Aluminum and Alumina-Reinforced Ni/Ni-Co Alloy Coatings” METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 44A, FEBRUARY 2013,pp 696- 707 ISSN: 1073-5623 Impact factor: 2.749
27) P.M.Ajith, P.Sathiya , KondaiahGudimetla and B.Ravishankar , “Mechanical, Metallurgical Characteristics and Corrosion Properties of Equal Channel Angular Pressing of Duplex Stainless Steel”, Advanced Materials Research Vol. 717 (2013) pp 9-14 ISSN: 1662-8985 Impact factor: 0.43
28) Ramesh Kumar S, Ravisankar B , Sathya P, Thomas Paul V, and Vijayalakshmi M,” Equal Channel Angular Pressing of an Aluminium Magnesium Alloy at Room Temperature”, Trans IIM Volume 67, Issue 4 (2014), Page 477-484 ISSN 0972-2815 Impact factor: 0.502
29) S. Surendarnath, K. Sankaranarayanasamy, B. Ravisankar“ Workability study on 99.04 % pure aluminum processed by ECAP” Materials and Manufacturing processes. Volume 29 (2014) 691–696. ISSN 1042-6914 Impact factor: 2.22
30) S. Suresh Kumar and B. Ravisankar, “Evaluation of Quality Diffusion Bonding in Similar Material (Cu/Cu) Using Ultrasonic ‘C’ Scan Testing Method” Applied Mechanics and Materials Vols. 592-594 (2014) pp 289-293. ISSN: 1662-7482 Impact factor: 0.3
31) Pravir Polly, K.ChandraSekhar, B.Ravisankar, S.Kumaran, “DENSIFICATION OF MECHANICALLY ALLOYED Al5083 -5wt% Y2O3 NANO-COMPOSITE BY EQUAL CHANNEL ANGULAR PRESSING”,Applied Mechanics and Materials Vols. 592-594 (2014) pp 963-967 ISSN: 1662-7482 Impact factor: 0.3
32) KondaiahGudimetla, B Chaithanyakrushn, K Chandra Sekhar, B Ravisankarand S Kumaran, “Densification and Consolidation of Al 5083 Alloy Powder by Equal Channel Angular Pressing, Applied Mechanics and Materials Vols. 592-594 (2014) pp 112-116 ISSN: 1662-7482 Impact factor: 0.3
33) A.T.Vijayashakthivel, T.N.SrikanthsDath, B.Ravisankar, “Influence of experimental environment on the enhancement of ultra fine grain structure with optimum ductility of equal channel angular pressed copper, Applied Mechanics and Materials Vols. 592-594 (2014) pp 410-415. ISSN: 1662-7482 Impact factor: 0.3
34) S. Surendarnath, K. Sankaranarayanasamy, and B. Ravisankar, “A Comparative Study of Commercially Pure Aluminum Processed by ECAP Using Conventional and New Die”, Materials and Manufacturing Processes, Vol. 29 (2014) pp- 1172–1178. ISSN 1042-6914 Impact factor: 2.22
35) Avik Kumar Mahata, Utpal Borah, ArvinthDavinci, Shaju K. Albert and B. Ravishankar, “Room Temperature Torsional Behavior of 15-Cr-15Ni Titanium Modified Austenitic Stainless Steel”,Procedia Engineering 86 ( 2014 ) 166 – 172. ISSN: 1877-7058 Impact factor: 0.73
36) M. Selvakumar, P. Chandrasekar, M. Mohanraj, B. Ravisankar , J.N. Balaraju , “Role of powder metallurgical processing and TiB reinforcement on mechanical response of Ti–TiB composites” Materials Letters 144 (2015) 58–61. ISSN:0167-577X Impact factor: 2.79
37) M. Selvakumar,P. Chandrasekar, B. Ravisankar, J. N. Balaraju, and M. Mohanraj, “Mechanical properties of titanium–titanium boride Composites through nanoindentation and ultrasonic techniques - An evaluation perspective”Powder Metallurgy and Metal Ceramics, Vol. 53, Nos. 9-10, January, 2015 557-565. ISSN: 1068-1302 Impact factor: 0
38) MeenuSrivastava, Siju, J.N. Balaraju, and B. Ravisankar, “Development and High Temperature Property Evaluation of Ni-Co-Cr-Al Composite Electroforms” Journal of Materials Engineering and Performance (online) DOI: 10.1007/s11665-015-1477-2..ISSN: 1544-1024 (Online)
39) S.Vigneshwaran, P.Venkatachalam, P. Rajesh, S. Kumaranand B. Ravisankar, “Densification of machined CP Al chips by Equal Channel Angular Pressing (ECAP)”, International Journal of Applied Engineering Research ISSN 0973-4562 Volume 10, Number 8 (2015) 6006-6010 Impact factor: 2.8936
40) G.Kondaiah, K.ChandraSekhar, B.Chaitanyakrushna, B.Ravisankar and S.Kumaran, “Characterization of Mechanically Alloyed Al5083 Alloy and Composite and Consolidation by Equal Channel Angular Pressing”, Applied Mechanics and Materials Vols 764-765 (2015) pp23-27. ISSN: 1662-7482 Impact factor: 0.3
41) 5) G.Kondaiah, K.ChandraSekhar, B.Chaitanyakrushna, B.Ravisankar and S.Kumaran,Densification of Al 5083 Mechanically Alloyed Powder by Equal Channel Angular Pressing
Transactions of the Indian Institute of Metals, Published on line ; DOI 10.1007/s12666-015-0557. ISSN 0972-2815 68 (2015) 171-176 Impact factor: 0.502
42) KondaiahGudimetla, Ganesh VarmaJampana, S Ramesh Kumar,BRavisankar and S Kumaran, Effect of Equal Channel Angular Pressing on Densification Behavior of Al 5083 Alloy Powder, Materials Science Forum Vols. 830-831 (2015) pp 63-66. ISSN: 1662-9752 Impact factor: 0.49
43) Balaraju J N, Abhinav, vinodkumarLokre, Kumar and B.Ravisankar, “Hardness and Wear Behavior of Electroless Ni-B Coatings”, Materials Science and Technology, DOI: 10.1080/02670836.2015.1137683. ISSN: 1005-0302 Published online: 08 Mar 2016, Pages 1654-1665
44) Kondaveeti, Chandra Sekhar, SaiPrakashSunkavalli, DurgaraoUndi, LV Hanuma Kumar, KondaiahGudimetla, and BalasubramanianRavisankar. "Metallurgical and Mechanical Properties of Mild Steel Processed by Equal Channel Angular Pressing (ECAP)." Transactions of the Indian Institute of Metals 70, no. 1 (2017): pp 83-87.M, DOI 10.1007/s12666-016-0862-3, 2016
45) S. Suresh Kumar, B. Ravisankar, “Destructive and non-destructive evaluation of copper diffusion bonds” Journal of Manufacturing Processes 23 (2016) 13–20, ISSN: 1526-6125 Impact factor: 2.53
46) N. Thiyaneshwaran, K. Sivaprasad, B. Ravisankar,” Work hardening behavior of Ti/Al-based metal intermetallic laminates” Int J AdvManuf Technology, 93 (2017) 361-374. ISSN: 0268-3768Impact factor: 1.568
47) S. Suresh Kumar, B. Ravisankar, “An Evaluation of Quality of Joints of Two Dissimilar Metals by Diffusion Bonding using Ultrasonic C Scan” Materials and Manufacturing Processes, 2016, Pages 2084-2090 DOI: 10.1080/10426914.2015.1127957 ISSN: 532-2475 Impact factor : 2.22
48) MeenuSrivastava, ParthasarathiBera, J.N. Balaraju, and B. Ravisankar , “FESEM and XPS studies of ZrO2 modified electrodeposited NiCoCrAlYnanocomposite coating subjected to hot corrosion environment” RSC Advances, Vol 6, 2016, 109083–109090 DOI: 10.1039/C6RA20634D ISSN: 2046-2069 Impact factor: 6.105
49) S. Suresh Kumar, J. Krishnamoorthi, B. Ravisankar, V. Balusamy, “Assessing quality of diffusion bonded joints with interlayer using ultrasonic/ultrasound”, Journal of Materials Processing Technology 242 (2017) 139–146. ISSN: 0924-0136, Impact factor: 2.359
50) Ramesh Kumar S, KondaiahGudimetla, Tejaswi B. Ravisankar B, “Effect of Microstructure and Mechanical Properties of Al-Mg alloy Processed by ECAP at Room Temperature and Cryo Temperature” Transactions of Indian Institute of Metals (2017) 70(3):639–648, DOI 10.1007/s12666-017-1073-2 ISSN 0972-2815
51) N. Thiyaneshwaran, M. Ashfaq, R. Sidharth, G. Saikiran, K. Sivaprasad and B. Ravisankar, “Microstructural Characterization and Mechanical Properties of Diffusion Bonded Ti–Ni In Situ Metal Intermetallic Laminates” Trans Indian Inst Met (2017) 70(3):709–719 DOI 10.1007/s12666-017-1076-z ISSN 0972-2815
52) S. P. Divya, M. Nagaraj, M. Kesavamoorthy, S. A. Srinivasan, B. Ravisankar, “Investigation on the effect of ECAP routes on the wear behaviour of AA2014” Transactions of the Indian Institute of Metals, (2018) 71(1):67–77 DOI 10.1007/s12666-017-1141-7
53) T. Arunnellaiappan, S. Arun, S. Hariprasad, S. Gowtham, B. Ravisankar, L. Rama Krishna,N. Rameshbabu, “Fabrication of corrosion resistant hydrophobic ceramic nanocomposite coatings on PEO treated AA7075”, Ceramics International, 44 (2018) 874–884, DOI: 10.1016/j.ceramint.2017.10.014 ISSN:0272-8842, Impact factor: 2.986
54) Sudarshan S and B Ravisankar, “Study on mechanical and microstructural behaviour of Cu-Zn alloy upon heat treatment and severe plastic deformation”, International Journal of Mechanical And Production Engineering, ISSN: 2320-2092, Volume- 5, Issue-9, Sep.-2017, pp 32-35, Impact factor: (JCC) : 6.8765
55) P Chandramohan, Shepherd Bhero, K Manikandasubramanian, and B Ravisankar, “Review of Additive Manufacturing of Ti Alloy Components Through Selective Laser Melting and Laser Metal Deposition”, Journal of Engineering Science & Technology, Volume13, Issue 3 (March 2018), pp. 69-77. ISSN: 1823-4690.
56) S. Arun, S. Hariprasad, B. Ravisankar, Evgeny V. Parfenov, Veta R. Mukaeva, N.Rameshbabu, “Formation of ZrO2-SiC composite coating on zirconium by plasma electrolytic oxidation in different electrolyte systems comprising of SiC nanoparticles”, Trans IIM 71(7), 1699-1713, 2018, https://doi.org/10.1007/s12666-018-1306-z
57) A.T.Vijayashakthivel,,R.Krishnamurthy, B.Ravisankar ,C.Karunakaran, “Influence of Nanoclay Addition on the Fatigue Behavior of Polymer Nanocomposites”, Materials Today: Proceedings 5 (2018) 7225–7229.
58) M. Nagaraj and B. Ravisankar, “Effect of Severe Plastic Deformation on Microstructural and Mechanical Properties of Structural Steel IS2062”, Transactions of the Indian Institute of Metals, (2018) 71(9):2315–2323
59) M. Nagaraj and B. Ravisankar, “Enhancing the strength of structural steel through severe plastic deformation based thermomechanical treatment” Materials Science & Engineering A 738 (2018) 420–429.
60) N. Thiyaneshwaran, K. Sivaprasad and B. Ravisankar, “Nucleation and growth of TiAl3
intermetallic phase in diffusion bonded Ti/Al Metal Intermetallic Laminate” Nature – scientific reports (2018) 8:16797, DOI:10.1038/s41598-018-35247-0
61) M.Nagaraj and B Ravisankar, “Investigation on ECAPed structural steel IS2062 and evaluation of strengthening mechanisms”, Mater. Res. Express 6 (2019) PP 1-11, https://doi.org/10.1088/2053-1591/aaf2fb.
62) M. Nagaraj and B. Ravisankar, “Effect of Severe Plastic Deformation on Microstructural and Mechanical Mechanical Behaviour of Friction-Welded Structural Steel IS2062”, Transactions of the Indian Institute of Metals, (2018), https://doi.org/10.1007/s12666-018-1527-1
63) S. Arun, S. Hariprasad, A. Saikiran, B. Ravisankar, E. V. Parfenov, V. R. Mukaeva, N. Rameshbabu, “The effect of graphite particle size on the corrosion and wear behaviour of the PEO-EPD coating fabricated on commercially pure Zirconium”, Surface and Coatings Technology, 363 (2019) 301–313,
64) Р. Г. Фаррахов, Е. В. Парфенов, В. Р. Мукаева, М. В. Горбатков, П. В. Тарасов, А. Р. Фаткуллин, Н. Рамешбабу (N.RameshBabu), Б. Рависанкар (B.Ravisankar), “Влияниесоставаэлектролитаназащитныесвойства ПЭО-покрытиянациркониевомсплаве Zr-1Nb” Электроннаяобработкаматериалов (Surface Engineering and Applied Electrochemistry) 2019, 55(1), 23–30. (In Russian) - DOI: 10.5281/zenodo.2551229.
65) S. Ramesh Kumar, Kondaiah Gudimetla, Smedha Mohanlal and B. Ravisankar, “Effect of Mechanically Alloyed Graphene-Reinforced Aluminium by Equal Channel Angular Pressing (ECAP)”, Trans Indian Inst Met, https://doi.org/10.1007/s12666-019-01715-y
66) M. Nagaraj, P.Deena and B. Ravisankar, ” Thermal Stability and Mechanical Behaviour of Equal Channel Angular Pressed Structural Steel IS2062” Transactions of the Indian Institute of Metals (2019), https://doi.org/10.1007/s12666-019-01727-8
67) S. Suresh Kumar, B. Ravisankar, Mohammed Ajmal Sheriff.F and M.J. Silvister Raju, “Thermal Analysis of Dissimilar Materials Diffusion Bonding Using Finite Element Method” Materials Science Forum, ISSN: 1662-9752, Vol. 969, pp 858-863.
68) K. Chandrasekhar, B. Ravisankar, S. Kumaran, “Synthesis of Al5083 Alloy by High Energy Ball Mill and Densification through Equal Channel Angular Pressing (ECAP)”, Materials Science Forum, ISSN: 1662-9752, Vol. 969, pp 68-72 doi:10.4028/www.scientific.net/MSF.969.68
69) K. Chandra Sekhar, Y. Umamaeshwar Rao, B. Ravisankar, and S.Kumaran, “Effect of Milling Time on Consolidation of Al5083 Nano Composite by Equal Channel Angular Pressing”, Materials Science Forum ISSN: 1662-9752, Vol. 969, pp 662-668. doi:10.4028/www.scientific.net/MSF.969.662
70) Ramesh Kumar S, Ravishankar B and Vijay M, “Prediction and analysis of magnetically impelled arc butt welded dissimilar metal”, Materials Today: Proceedings (Article in press) Available online 11 October 2019, https://doi.org/10.1016/j.matpr.2019.09.054
71) R. G. Farrakhova, E. V. Parfenov, V. R. Mukaeva, M. V. Gorbatkov, P. V. Tarasov, A. R. Fatkullin, N. Rameshbabu, and B. Ravisankar, “Effect of Electrolyte Composition on Protective Properties of the PEO Coating on Zr–1Nb Zirconium Alloy”, Surface Engineering and Applied Electrochemistry, 2019, Vol. 55, No. 5, pp. 514–521.
72) Abhishek Ghosh, Manojit Ghosh, Kondaiah Gudimetla, Rajib Kalsar, Leo A. I. Kestens, Chandra Sekhar Kondaveeti, Bhagat Singh Pugazhendhi, Balasubramanian Ravisankar, “Development of ultrafine grained Al-Zn-Mg-Cu alloy by equal channel angular pressing: microstructure, texture and mechanical properties" Archives of Civil and Mechanical Engineering, Vol 20, 7-24, 2020
73) B Ravisankar, K Sivaprasad, N Ramesh Babu, G I Raab, and R Z Valiev, “High strength and high conductive copper-based alloy produced by SPD for contact wires for high-speed railway lines - A short review”, Materials Science and Engineering 672 (2019),1-4, doi:10.1088/1757-899X/672/1/012055
74) N Rameshbabu, B Ravisankar, A Saikiran, E V Parfenov and R Z Valiev, “Surface modification of CP-Ti metallic implant material by plasma electrolytic oxidation”, Materials Science and Engineering 672 (2019), doi:10.1088/1757-899X/672/1/012012
75) C Chinthanai Selvan, C Sathiya Narayanan, B Ravisankar, R Narayanasamy and C Thillaiyadi Valliammai “The dependence of the strain path on the microstructure, texture and Mechanical properties of cryogenic rolled Al-Cu alloy”, Materials Research Express, 7(2020)036525, doi: https://doi.org/10.1088/2053-1591/ab7f9a
76) Chandramohan P, Raman Raghu, and Balasubramanian Ravisankar, “Anodizing and its effects on mechanical properties and corrosion resistance of laser additive manufactured Ti-6Al-4V alloy”, International Journal of Materials Research (formerly: Zeitschrift fur Metallkunde) Vol.111 (2020) issue: 8 PP 654-660 DOI 10.3139/146.111931
77) MEENU SRIVASTAVA, ATANU CHAUDHURI, PARTHASARATHI BERA, B. RAVISANKAR, and J. N. BALARAJU, “CHARACTERIZATION OF ELECTRODEPOSITED ZIRCONIA MODIFIED NiCoCrAlY COMPOSITE COATING ISOTHERMALLY OXIDIZED AT 1000oC”, Surface Review and Letters, Vol. 28, No. 3 (2021) 2150003 (14 pages) DOI: 10.1142/S0218625X21500037
78) S. Suresh Kumar, R. Padmapreetha and B. Ravisankar, “Mechanical and ultrasonic characterization of copper-nickel diffusion bonded joints”, Advances in Materials and Processing Technologies. https://doi.org/10.1080/2374068X.2020.1860589
79) Ravisankar Balasubramanian, Rameshbabu Nagumothu, Evgeny Parfenov, Ruslan Valiev, “Development of Nanostructured Titanium Implants for Biomedical Implants – A short review” - Materials Today: Proceedings (Accepted)
80) N. Thiyaneshwaran, K. Sivaprasad and B. Ravisankar, “Characterization based analysis on TiAl3 intermetallic phase layer growth phenomenon and kinetics in diffusion bonded Ti/TiAl3/Al laminates”, Materials Characterization (Accepted)
81) Melwin Sajan, Hariprasad Sampatirao, Ravisankar Balasubramanian and Rameshbabu Nagumothu, “Plasma electrolytic oxidation of AZ31 magnesium alloy diffusion bonded with aluminum” Materials Today: Proceedings (in Press)
82) M. Nagaraj and B. Ravisankar, “Experimental Investigations on Joining of Equal Channel Angular Pressed Structural Steel IS2062 with Friction Welding Method”, Trans Indian Inst Met https://doi.org/10.1007/s12666-021-02239-0, Published online: 06 April 2021.
83) Kartheek. S.M. Sonti, Biswaranjan Dash, K.V. Vamsi, H. Bandyopadhyay, B. Ravisankar, K. Sivaprasad, S. Karthikeyan, “ Deformation behavior of Al/Cu in-situ metal-intermetallic laminates at low and high strain rates”, Journal of Alloys and Compounds 873 (2021) 1597671-12
84) Premchand C, Hariprasad S, Saikiran A, Lokeshkumar E, Manojkumar P, Ravisankar B, Venkataraman B, and Ramesh Babu N, “Assessment of corrosion and scratch resistance of plasma electrolytic oxidation and hard anodized coatings fabricated on AA7075-T6”, Transactions of the Indian Institute of Metals (2021), https://doi.org/10.1007/s12666-021-02289-4
85) Anil Babu Sankuru, Hareesh Sunkara, Subash Sethuraman, Kondaiah Gudimetla, B. Ravisankar, and S.P.Kumaresh Babu, “Effect of processing route on microstructure, mechanical and dry sliding wear behavior of commercially pure magnesium processed by ECAP with back pressure”, Transactions of the Indian Institute of Metals, https://doi.org/10.1007/s12666-021-02340-4 (Online)
86) Anil Babu Sankuru, Hariram M, Kondaiah Gudimetla, Ravisankar B and Kumaresh Babu S.P, “ Optimization of processing temperature and back pressure of equal channel angular pressing for achieving crack-free fine-grained magnesium”, Materials Today: Proceedings (Article in press)
87) Nagarajan Thiyaneshwaran, Chithirai Pon Selvan, Avinash Lakshmikanthan, Katakam Sivaprasad, and Balasubramanian Ravisankar, “ Comparison based on specific strength and density of in-situ Ti/Al and Ti/Ni metal intermetallic laminates” a journal of materials research and technology 2021;14:1126 -1136
88) Jayanthi A., Anilkumar M., Ravisankar B.,” Study on multi-stage forging process with a combination of different strain rate and temperature region in IMI685 aero engine compressor disc forging” Materials Today: Proceedings (Accepted)
89) N. Thiyaneshwaran, K. Sivaprasad and B. Ravisankar, "Dynamic compression behavior of Ti/TiAl3/Al metal intermetallic laminates", Journal of Materials Engineering and Performance (Accepted).
90) C. Premchand, E. Lokeshkumar, P. Manojkumar, B. Ravisankar, L. Rama Krishna, B. Venkataraman, and N. Rameshbabu, “ Laser Sintered Ti-6Al-4V Alloy Coated with Plasma Electrolytic Oxidation: Influence of Duty Cycle and Frequency on Morphological, Structural, and Corrosion Properties” Journal of Materials Engineering and Performance, Published on line 24 March 2022, https://doi.org/10.1007/s11665-022-06810-8
1)V Srinivasan, R Kotteswaran, Amit P Shukla and B Ravisankar"Neural Networks Based Image Analysing System For S.G.Iron", Technology, August 1999, pp 1-4
2) B.Ravisankar, S SRamakrishnan and P C Angelo "Diffusion Bonding in Dissimilar Materials- An overview", Technology, A Journal of PSG College of Technology, Coimbatore, 2000, pp 5-9
3) B.Ravisankar, S SRamakrishnan and P C Angelo " High Strain Rate Deformation of Materials - An Overview", Technology, A Journal of PSG College of Technology ,2001, pp 28-35.
4) M.Nandhakumaran, S.Kumaran, B.Ravisankarand T.SrinivasaRao,”Synthesis and characterisation of Fe-Based multicomponent bulk metallic glasses by high energy ball milling” – Transactions of Powder Metallurgy Association of India, Volume 33, December 2007, pp14-17.
5) R.Nagalakshmi, S.Manimozhi, S.Ashok and B.Ravisankar, “ An overview of creep in Materials”, WRI Journal, Volume 28, No 4 2008, pp13-22.
6) S.Suresh Kumar, J.Krishnamoorthi, B.Ravisankarand P.C.Angelo, “Methodology to evaluate the quality of diffusion bonded joints by ultrasonic method”, Indian Journal of Engineering and Materials Sciences, Volume 16, October 2009, pp 331-334.
7) B.Ravisankar, D.Lavanya and K.Anbarasu, “Role of Metals in Indian Medicine”, National Journal of Technology, Vol 6 No 2,June 2010 PP 16 – 18.
8) B.Ravisankar, P.Venkatachalam, S.Ramesh Kumar and J.Krishnamoorthi, “Grain refinement by ECAP and Cryo rolling of CP-Al - A comparative study”, National Journal of Technology, Vol 7 No 2,June 2011 PP 53-57
9) K. Chandra Sekhar, P. Polly, S. Kumaran and B. Ravisankar, “Consolidation of Mechanically Alloyed Al5083-5 wt.%Y2O3 Nano-composite by Equal Channel Angular Pressing (ECAP)” - Transactions of Powder Metallurgy Association of India, Volume 40 (2), December 2014, pp32-36. ISSN 0377-9416
10) P Chandramohan, Shepherd Bhero, BabatundeAbiodunObadele, Peter ApataOlubambi and B Ravisankar, “Effect of built orientation on direct metal laser sintering of Ti-6Al-4V”, Indian Journal of Engineering & Materials Sciences, Vol. 25, February 2018, pp. 69-77.
1) B Ravisankarand A Rajadurai "Pack Boronising of AISI 304 & 410 stainless steel" - International Convention on Surface Engineering - INCOSURF - 92 held at Indian Institute of Science, Bangalore during December 1992.
2) B.Ravisankar, S SRamakrishnan and P C Angelo "Fabrication of hollow cylinder in YBCO by diffusion bonding under superplastic conditions" - International conference on Processing & Manufacturing of Advanced Materials - Processing, Fabrication and applications (THERMEC 2000) held at Las Vegas, USA during December 4-8, 2000 and published in the form of CD
3) Sujit Singh, R P Sugavaneswaran, B RavisankarJ Krishnamoortihand P C Angelo "Production of nano – sized grains by severe plastic deformation” - International Conference on NANO TECHNOLOGY – materials and Methods, held at Coimbatore Institute of Technology, Coimbatore during June 23-25, 2006. PP 15
4) B.Ravisankar, J.Krishnamoorthi and P.C.Angelo , “ Diffusion Bonding of Ti-6Al-4V with IN 718 using Nickel as Interlayer” – International Conference on Recent Advances in Materials and Processing (RAMP 2006) held at PSG College of Technology, Coimbatore during 15-16, December 2006. PP 87
5) J.Krishnamoorthi, V.Balusamy, P.C.Angelo and B.Ravisankar , “ Diffusion Bonding of Ti-6Al-4V with AISI SS 304 using Interlayers” – International Symposium for Research Scholars (ISRS 2006) held at Indian Institute of Technology, Chennai during 18-20, December 2006. The paper bagged ARCI Technical Excellence award.
6) M.Nandhakumaran, S.Kumaran, B.Ravisankarand T.SrinivasaRao, ” Synthesis and characterisation of Fe-Based multicomponent bulk metallic glasses by high energy ball milling” – International conference on Powder Metallurgy and particulate materials (PM 07), Noida during 9-11, February 2007 PP 33.
7) R.Arivazhagan, B.Prabha, S.Manimozhi, S.Suresh, G.Umashanker, R.Nagalakshmi and B.Ravisankar, “ Metallurgical studies in super 304H Austenitic stainless steel” – International symposium on Advances in Stainless steels, Chennai during 9-11, April 2007 PP A 114.
8) P.Venkatachalam, B.Ravisankarand S.Kumaran, “ Analysis of stress distribution in Equal Channel Angular Pressing (ECAP) of CP-Al using ABAQUS” – International Conference on Modeling and Simulation, Coimbatore during 27-29, August 2007 PP 34
9) M.Venkatesan, P.Venkatachalam, B.Ravisankarand S.Kumaran, “ Effect of cold and cryo rolling on microstructure and mechanical properties of Al 6012 alloy” – International Conference on Advanced materials and Composites (ICAMC-2007), Thiruvananthapuram during 24-26, October 2007 PP 122
10) S.Jerome, S.P.KumareshBabu, B.Ravisankarand K.S.Pandey, “ Prediction of welding residual stresses in butt welded GTAW process by finite element analysis” – International Conference on Advanced materials and Composites (ICAMC-2007), Thiruvananthapuram during 24-26, October 2007 PP 133
11) P. Venkatachalam, B. Ravisankar, V. Thamos Paul, M. Vijayalakshmi and S. Kumaran, “ Enhancement of strength in Al 2014 alloy through grain refinement by ECAP” – International Conference Junior Euromat 2008, University of Laussane, Switzerland during 14-17, July 2008.
12) .Venkatachalam, B. Ravisankar, V. Thamos Paul, M. Vijayalakshmi and S. Kumaran “Effect of Microstructural and Mechanical properties of Al 2014 alloy Processed through route A and BA International Symposium for Research Scholars (ISRS 2008) held at Indian Institute of Technology, Chennai during 10-12, December 2008.
13) MeenuSrivastava, J.N.Balaraju, B.Ravisankar, V.K.William Grips, K.S.Rajam, “DEVELOPMENT OF NANOCRYSTALLINE Ni-Al COATINGS AND ITS THERMAL STABILITY” International Conference on Synthesis, Characterisation, Consolidation and Modelling Nano Materials (ICON – 2010) held at PSG College of Technology, Coimbatore during 5-6 March 2010.
14) Ramesh Kumar S, Venkatachalam P, Ravisankar B, “FINITE ELEMENT ANALYSIS OF EQUAL CHANNEL ANGULAR PRESSING (ECAP) AT DIFFERENT CORNER ANGLES BY USING DEFORM-3D” International Conference on Synthesis, Characterisation, Consolidation and Modelling Nano Materials (ICON – 2010) held at PSG College of Technology, Coimbatore during 5-6 March 2010.
15) S.Ramesh Kumar, P.Venkatachalam and B.Ravisankar, “3D simulation of equal channel angular pressing for different channels by using finite element method”, International conference on “Frontiers in Mechanical Engineering (FIME – 2010) held at National Institute of Technology, Surathkal, Mangalore during 20 -22 May 2010.
16) Ramesh Kumar S, Kondiah G, Venkatachalam P and B. Ravisankar, “Simulation of dissimilar length of the billet for Equal Channel Angular Pressing using Deform 3 D” International Symposium for Research Scholars (ISRS 2010) held at Indian Institute of Technology, Chennai during 20-22, December 2010.
17) S.Ramesh Kumar, S.MuhammedZubair and B.Ravisankar, “ Simulation of microstructural changes during ECAP using DEFORM 3D” International Conference on Design and Advances in Mechanical Engioneering (ICDAAME 2011) held at SKP Engineering College, Tiruvannamalai during 16-17, 2011 pp 253-258
18) G.Kondaiah, K.ChandraSekhar, B.Chaitanyakrushna, B.Ravisankar&S.Kumaran, “ Characterization of mechanically alloyed Al5083 alloy and composite and consolidation by equal channel angular pressing” International conference on Engineering and Technology Innovation (ICETI 2014) held at Kenting, Taiwan during 31 October – 04 November 2014.
19) Sudarshan S, B Ravisankar, “Study on Mechanical and Microstructural Behaviour of Cu-Zn Alloy upon Heat Treatment and Severe Plastic Deformation”, Proceedings of 12th IRF International Conference, 24th September, 2017, Goa, India PP 32-35.
20) Vaibhav Gaur, R.K.Gupta, V.Anil Kumar, B.Ravisankar and Sathish Kumar Singh,” Study on mocrostructural evolution and its effect on the hardness of differently heat treated conditions of CP-Titanium”, International Conference on Advanced Materials and Processes (ADMAT 2017), 14-16 December 2017, Thiruvananthapuram, Kerala. PP 130
21) S. Suresh Kumar, B. Ravisankar, Vishnu Chandar. S, R.P. DhivakarRaviram, “Evaluation of mechanical properties of friction stir welded commercially pure aluminium”, 3rd International Conference on Design, Analysis, Manufacturing and Simulation (ICDAMS 2018), Chennai, India, April 6-7,2018.PP172-176.Weblink:https://www.matecconferences.org/articles/matecconf/abs/2018/31/contents/contents.html
1) B Ravisankarand K A Padmanabhan "Hot Compaction Of YBa2Cu3O7-x" - 32nd National Metallurgists' day held at Visakhapatnam - During 14 - 17, 1994.
2) S SRamakrishnan, P Gopalakrishnan, N Rajeev Kumar, C S Venkateswaran and B Ravisankar"Molten salt Electrolytic Boriding of Mild steel" - 34th National Metallurgists' day held at Delhi,14 - 17, 1996.
3) T Sreenivas, N Sakthivel, B Ravisankar and S SRamakrishnan"A Database management system for selection of steel" - proceedings of the Conference on Computer Applications in Metallurgy and Material science - CAMME 96 held at Jamshedpur,10 - 11, December, 1996, pp 210 -221
4) B Ravisankar"Superplastic forming and Diffusion Bonding" - proceedings of the workshop on Recent Trends in Precision Metal forming held at PSG College of Technology, Coimbatore during 12 -13, September, 1997, pp 20-27
5) B Ravisankar"Role of computers in Metal Forming" - proceedings of the workshop on Recent Trends in Precision Metal forming held at PSG College of Technology, Coimbatore,12 -13, September, 1997, pp 20-27
6) V Srinivasan, B Ravisankar and V Balusamy "Image Identifying System For Determination of Gray Cast Iron Type Using Neural Networks" - 36th National Metallurgists' day held at Bangalore, 14 - 17, 1998.
7) B.Ravisankar, S SRamakrishnan and P C Angelo "Modelling of Diffusion Bonding"- proceedings of the National Seminar on Advances in Metal Forming held at Madras Institute of Technology, Anna University, Chennai, 15 -16, March, 2000, pp 8-13
8) P V S S Sridhar and B Ravisankar "Analysis of Diffusion Bonding using FEM" - proceedings of the National Conference on "Recent Advances in Material Processing" held at Annamalai University,7-8, September, 2001, pp 552-560
9) B Ravisankarand M Sundar "Phase Transformations in Deep Drawing of Austenitic Stainless Steel Drum - A case study "- proceedings of "National Conference on Processing of Metals" held at PSG College of Technology, Coimbatore, January 31 - February 01, 2002, pp 217 - 222
10) R L Sreevidhya, S Srividhya, A Chandrasekar, N Visalakshi, T Thirumalai and B Ravisankar"Solid State Diffusion Bonding of Wrought AISI 304 stainless steel to Ti-6Al-4V" - National Conference on "Material Processing & Failure Analysis", held at Regional Engineering College, Trichy, June 19-20, 2003.
11) N Visalakshi, T Tirumalai, J Krishnamoorthi and B Ravisankar "Corrosion studies on diffusion bonded AISI 304 with Ti-6Al-4V" - All India Seminar on Emerging Trends in Surface Engineering, held at VLB Janakiammal College of Engineering and Technology, Coimbatore, July 01-02,2004 pp 119-124.
12) R P Suganeswar, T Tirumalai, J Krishnamoorthi, B Ravisankarand P C Angelo "Equal Channel Angular Pressing of Commercially Pure Aluminium " - 42nd National Metallurgists' day held at Trivanathapuram - During 17 - 19, 2004 PP 176
13) J Krishnamoorthi, B Ravisankarand P C Angelo "Diffusion Bonding of Titanium with Aluminium " – 43 rd National Metallurgists' day held at Chennai- During 14 - 16, November 2005 PP 163
14) B Ravisankar ,Krishnamoorthi, and P C Angelo "Production and Properties of Nanostructured materials – A Review” - All India Seminar on Manufacturing and Management of Intellectual materials held at VLB Janakiammal College of Engineering and Technology, Coimbatore, March 17-18,2006 pp 18- 24.
15) S.Suresh Kumar, J.Krishnamoorthi, B.Ravisankar and P.C.Angelo, “ Evaluation of Quality of Diffusion Bonded Joints by Ultrasonic Method” – National Welding Seminar held at Chennai Trade Centre, Chennai, November 24-26, 2006 pp 167-171.
16) J.Krishnamoorthi, B Ravisankar, P C Angelo and V.Balusamy "Diffusion Bonding of Ti-6Al-4V with INCONEL 718 " – 45th National Metallurgists' day held at Mumbai - During 13 - 16, November 2007 PP 210.
17) R.Nagalakshmi, S.Manimozhi, S.Suresh, B.Prabha and B.Ravisankar, “ Corrosion Aspects of Super 304 H material and its weldments” – National Conference on Corrosion and its control held at Holy Cross College, Tiruchirappalli during 30th November to 1st December 2007 PP1-5
18) P.Venkatachalam, S.Manivannan, B.Ravisankar and S.Kumaran, ”Effect of Equal Channel Angular Pressing (ECAP) on Microstructural and Mechanical properties of Pure Cu, CP Al and 7075 Al alloy” – National Conference on Emerging Materials and Technologies for India – 2020 at National Institute of Technology, Tiruchirappalli during 24-25 January 2008 PP 61
19) S.Jerome, B.Ravisankar, NandkishoreKarandeKedarDeshmukh, Q.B.Nguyen and Manoj Gupta, “Synthesis of Magnesium Nano Composites and its Diffusion Bonding Studies” – National Seminar on Joining of Materials (SOJOM-08) held at Tiruchirappalli during 11-13 December 2008 PP 83-90.
20) S.Ramesh Kumar, P.Venkatachalam and B.Ravisankar, “Simulation of grain size distribution in equal channel angular pressing using DEFORM 3D” – Workshop on Thermodynamics and kinetic modeling of phase and microstructure stability of alloys (STEM 2009) held at Indira Gandhi Centre for Atomic Research (IGCAR) Kalpakkam during 24-25 September 2009 PP 34
21) Chandrasekar K, SubramanyamAdabala, B.Ravisankar and S.Kumaran, “Characterisation of Mechanically alloyed Al 5083 alloy and Composite Processed by Equal Channel Angular Pressing” in 53rd NMD and 69th ATM held during 13-16 November 2015 at Coimbatore PP 169
22) Kondiah. G, B.Ravisankar, S.Kumaran and S.Ramesh Kumar, “Characterisation of Mechanically alloyed Al 5083 alloy Processed by Equal Channel Angular Pressing” in 53rd NMD and 69th ATM held during 13-16 November 2015 at Coimbatore PP 169
23) Suresh Kumar and B.Ravisankar, “Evaluation of Quality of Dissimilar Diffusion Bonding by Ultrasonic method” in 53rd NMD and 69th ATM held during 13-16 November 2015 at Coimbatore PP 65
24) B.Ravisankar, P.Venkatachalam, J.Krishnamoorthi and P.C.Angelo, “Comparison of ECAP and Cryo rolling of CP-Al based on hardness studies” in National Conference on Materials, Design and Energy held at PSN College of Engineering and Technology, Tirunelveli during April 6 and 7, 2017 Page No 1.
1) Proceedings of the Winter School on "Recent Advances in Metal shaping Techniques", co-authored with P.C.Angelo, PSG College of Technology, 1999.
2) Contributed a chapter on Equal Channel Angular Pressing (ECAP) to the “Handbook of Mechanical Nanostructuring” Edited by Mahmood Aliofkhazraei, Wiley-VCH Verlag GmbH & Co, Germany PP 277- 296, 2015. ISBN 978-3-527-33506-0
3) P.C.Angelo and B.Ravisankar book on “Non Ferrous Alloys: Structures, Properties and Engineering Applications”, Cengage publishers, 2018 ISBN: 9789387994041
4) P.C.Angelo and B.Ravisankar book on “Periodic Table of Elements”, Mahi Publishers, Ahmedabad, 2019, ISBN: 978-81-940137-1-6
5) P.C.Angelo and B.Ravisankar book on “Introduction to Steel- Processing, Properties and Applications”, CRC Press, Taylor & Francis Group, Florida, U.S.A. 2019, ISBN 9781138389991
6). T.Thirumalai, R.Subramaniam and B.Ravisankar - contributed a chapter on High-Temperature wear behaviour of Aluminium – Boron carbide – Graphite composites to the “Boron carbide: Structure, Processing, Properties and Applications – Series: Materials Science and Technology ” edited by Madhav Reddy Kolan, Nova Science Publishers Inc, New York (April 2020) PP 281- 294, ISBN 9781536171211 (hardcover); ISBN 9781536171226 (adobe version)
7) T. Thirumalai, S. Nagakalyan, B. Ravisankar book on “Production and characterisation of aluminium with quartz in composites”, Lambert Academic Publishing, Mauritius, 2020, ISBN: 978-620-2-68457-6.
