| 1. | Ameena, A., Kumanan, S., Kumbhar, P. | Framework for Auditing Sustainability in Manufacturing Industries. | Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. | https://doi.org/10.1007/978-981-95-0853-2_39 | 2026 |
| 2. | Veluchamy, M., Kumanan, S. | Investigation of Microstructural and Corrosion Behavior of Heat Treated and Laser Shock Peened Additively Manufactured 316L SS Parts. | J. of Material Engineering and Performance | https://doi.org/10.1007/s11665-026-13748-8 | 2026 |
| 3. | Vickram, K Kumanan, S | The influence of tool traverse speed on microstructure and corrosion properties of friction stir processed AA7075/graphene oxide surface nanocomposite | J. of The Institution of Engineers (India): Series D | 2025 | |
| 4. | Veluchamy, M Kumanan, S | Investigation of the Influence of Laser Shock Peening on Microstructural and Corrosion Behavior of Additively Manufactured SS316L Parts | J. of Materials Engineering and Performance | 2025 | |
| 5. | Karrmuhilan M Kumanan S, Venkatesh Kannan , M. | Orientation-induced anisotropy, failure mechanisms, and corrosion behavior of Wire and Arc Additively Manufactured Nickel-based superalloy structure | J. of Materials Engineering and Performance | 2025 | |
| 6. | Veluchamy, M Kumanan,S | “Effect of Double-Side Laser Shock Peening on Tensile Behavior of Additively Manufactured SS316L Parts” | J. of Failure Analysis and Prevention. | 2025 | |
| 7. | Vickram, K Kumanan, S | Effect of reinforcement and tool traverse speed on corrosion behavior of friction stir processed AA7075-T6 surface nanocomposites | International J. on Interactive Design and Manufacturing (IJIDeM) | 2025 | |
| 8. | Vickram, K, Kumanan , S | Enhancing Surface Properties of AA7075-T6 using Carbonaceous and Ceramic Nanoparticle reinforcement | Welding International | 2025 | |
| 9. | Veluchamy, M Kumanan, S | Estimation of Tribological Performance of Selective Laser Melted SS316L under Lubricated Conditions using MCDM techniques | Multiscale and Multidisciplinary Modeling, Experiments and Design (20xx) x:0001–0015 | https://doi.org/10.1007/s41939-025-00954-5 | 2025 |
| 10. | Veluchamy, M Kumanan, S | Influence of Laser Shock Peening on the Tribological behavior of Additively Manufactured SS316L | Surface Review and Letters | https://doi.org/10.1142/S0218625X2550180X | 2025 |
| 11. | Veluchamy, M Kumanan, S | Microstructural and Mechanical Characterization of Heat-Treated and Laser Shock Peened SS316L Fabricated by Selective Laser Melting | J. of Materials Engineering and Performance | 2025 | |
| 12. | Veluchamy M, Kumanan S Satheeshkumar V | Investigations on tribological behavior under wet condition of post heat treated additively manufactured SS316L parts | Industrial Lubrication and Tribology | https://doi.org/10.1108/ILT-04-2024-0110 | 2024 |
| 13. | Vickram, K., Kumanan,S | Investigation of tool traverse speed on surface integrity of nano composites processed by friction stir process | Proceedings of the Institution of Mechanical Engineers, Part N: J. of Nanomaterials, Nanoengineering and Nanosystems. | https://doi.org/10.1177/23977914241271836 | 2024 |
| 14. | Karmuhilan, M., Kumanan, S. | . “Mechanical anisotropy and failure analysis of Inconel 625 parts manufactured using Wire and Arc Additive Manufacturing (WAAM)”, | J. of Failure Analysis and Prevention. | https://doi.org/10.1007/s11668-024-01860-7 | 2024 |
| 15. | Karmuhilan, M., Kumanan, S. | Effect of Inter-pass layer temperature on Inconel 625 parts fabricated using Wire and Arc Additive Manufacturing | J. Mater. Eng. Perform | https://doi.org/10.1007/s11665-024-09148-5 | 2024 |
| 16. | Karmuhilan, M., Kumanan, S. | Microstructural features and corrosion behavior of Inconel 625 components fabricated using Wire and Arc Additively Manufacturing (WAAM) | Welding International | https://doi.org/10.1080/09507116.2023.2269087 | 2023 |
| 17. | Nair, A., Kumanan, S., Prakash, C., Mohan, D. G., Saxena, K. K., Kumar, S., & Kumar, G. | Research developments and Technological advancements in conventional and non-conventional machining of superalloys – A Review |
J. OF ADHESION SCIENCE AND TECHNOLOGY 2023, VOL. 37, NO. 22, 3053–3124 |
https://doi.org/10.1080/01694243.2023.2186202 | 2023 |
| 18. | Karmuhilan, M., Kumanan, S. | Location-dependent microstructure analysis and mechanical behavior of inconel 625 using Cold Metal Transfer(CMT) based wire and arc additive manufacturing | Vacuum Volume 207, January 2023, 111682 | https://doi.org/10.1016/j.vacuum.2022.111682 | 2023 |
| 19. | Paramasivam, B., Kumanan, S., Kavimani, V., & Varatharajulu, M. | Fuzzy-based prediction of compression ignition engine distinctiveness powered by novel graphene oxide nanosheet additive diesel–Aegle marmelos pyrolysis oil ternary opus | International J. of Energy and Environmental Engineering | pp.1-19 | 2022 |
| 20. | Jegan Jose, G., Prasannavenkatesan, S., Kumanan, S. | Technicians Selection and Allocation in Field Services using a Hybrid Approach | International J. of Services and Operations Management, | Vol.43 No.2, pp.249 - 268 2022 | 2022 |
| 21. | Jegan Jose, G., Prasannavenkatesan, S., Kumanan, S. | Real time asset tracking in field services using barcode system: A Case Study | International J. of Services Operations and Informatics | 12(1), pp. 40–57 | 2022 |
| 22. | Andrew,A., Kumanan, S. | Spares inventory prediction using back propagation neural networks a case study | Manufacturing Technology Today, | Vol. 20, No. 7, pp- 3-8 | 2021 |
| 23. | Nair, A., Kumanan, S., & Shanavas, K.P. | Heuristic optimization techniques in abrasive water jet hole making - A case study | Materials Today: Proceedings | 50, pp. 1291-1299 | 2021 |
| 24. | Nair, A., Kumanan, S., Shanavas, K.P. | Multi-performance optimization in wire EDM of Inconel 617 using GRA and genetic algorithm | Materials Today: Proceedings | 50, pp. 1354-1366 | 2021 |
| 25. | Baranitharan, P., Kumanan, S., & Sudhagar, S. | "An intelligent novel approach for diesel engine life monitoring using infrared image processing technic." | Environmental Progress & Sustainable Energy | e13712 https://doi.org/10.1002/ep.13712 | 2022 |
| 26. | Baranitharan.P Kumanan, S | "Selection of smart fuel opus for diesel engine depending on their fuel characteristics: an intelligent hybrid decision-making approach. | Environmental Science and Pollution Research | 2021 | |
| 27. | Jagadeesh,S., Kumanan,S. | Inservice Inspection Of Cladding Using Phased Array Ultrasonic Testing System | Manufacturing Technology Today, | Vol. 17, No. 03 | 2020 |
| 28. | Andrew, A., Kumanan, S. | Development of an intelligent decision making tool for maintenance planning using fuzzy logic and dynamic scheduling | International J. of Information Technology (Singapore) | 12(1), pp. 27–36 | 2020 |
| 29. | Nair, A., Kumanan, S. | Evaluation and optimization of geometric deviations in abrasive water jet profile cutting of Inconel 617 | J. of Testing and Evaluation | 49(1) | 2020 |
| 30. | Jegan Jose, G., Prasannavenkatesan, S., Kumanan, S. | Resource Prioritization and Task Allocation in Field Services using Fuzzy MCDM and MINLP | International J. of Latest Research in Engineering and Technology | Vol 06, 19-30 | 2020 |
| 31. | Dev Anand, M., Kumanan, S., Girish, R.R., Selvaraj, T., Asokan, P. | An enhanced genetic algorithm for assembly planning | International J. of Recent Technology and Engineering | 8(2 Special issue 3), pp. 36–42 | 2018 |
| 32. | Shajahan, C.A., Subramanyan, E.E., Kumanan, S., Firoz, N. | Design Process Sequencing in Product Development Process Using Design Structure Matrix and Particle Swarm Optimisation Techniques | J. of Physics: Conference Series | 1355(1) 012027 | 2017 |
| 33. | Nair, A., Kumanan, S. | Optimization of size and form characteristics using multi-objective grey analysis in abrasive water jet drilling of Inconel 617 | J. of the Brazilian Society of Mechanical Sciences and Engineering | 40(3), 121 | 2017 |
| 34. | Kumanan, S., Nair, A. | Prediction of multi performance characteristics of wire EDM process using grey ANFIS | IOP Conference Series: Materials Science and Engineering | 244(1), 012003 | 2017 |
| 35. | Anish Nair., Kumanan, S. | Multi-performance optimization of abrasive water jet machining of Inconel 617 using WPCA | Materials and Manufacturing Processes | Vol. 32 Issue 6, 693-699 | 2017 |
| 36. | Manikandan, N., Kumanan, S., Sathiyanarayanan, C. | Multiple performance optimization of electrochemical drilling of Inconel 625 using Taguchi based Grey Relational Analysis | Engineering Science and Technology, an International J. | 20(2), 662-671 | 2017 |
| 37. | Manikandan,N., Kumanan, S., Sathiyanarayanan, C. | Optimisation of electrochemical drilling process using Taguchi method and regression analysis | International J. of Machining and Machinability of materials | Vol 19 No.2 136-159 | 2016 |
| 38. | Kumanan, S., Vaghela S, J. | Investigations on effect of direction of welding on distortion in combined butt and filled joint using finite element analysis | Indian J. of Engineering & Materials Sciences | Vol. 24, June 2017, pp. 201-206 | 2015 |
| 39. | Edwin Raja Dhas, J. Kumanan, S | Evolutionary fuzzy SVR modeling of weld residual stress | Applied soft computing | Vol. 42: 423-430 | 2015 |
| 40. | Leo Kumar, S.P., Jerald, J., Kumanan, S. | Feature-based modelling and process parameters selection in a CAPP system for prismatic micro parts | International J. of Computer Integrated Manufacturing | Vol 28 Issue 10 1046-1062 | 2015 |
| 41. | Ahilan, C., Edwin Raja Dhas, J ., Kumanan,S., Sivakumaran,N. | Performance assessment of heat exchanger using intelligent decision making tools | Applied Soft Computing | Volume 26, January 2015, Pages 474?482 | 2014 |
| 42. | Manikandan,N., Kumanan, S., &Sathiyanarayanan, C. | Multi Response optimization of electro chemical drilling of Titanium Ti 6Al 4V alloy using taguchi based grey relational analysis | Indian J. of Engineering and Material science | Vol 22 153-160 | 2014 |
| 43. | John Edwin Raja Dhas., Somasundaram Kumanan. | Neuro Evolutionary model for weld residual stress prediction | Applied Soft Computing | Volume 14 Part C, 461-468. | 2014 |
| 44. | Leo Kumar, S.P., Jerald, J., Kumanan, S., Aniket, N. | Process parameters optimization for micro end-milling operation for CAPP applications | Neural Computing and Applications | Vol 25 No 7-8 1941-1950 | 2014 |
| 45. | Leo Kumar, S.P., Jerald, J., Kumanan, S., Prabakaran, R. | A Review on Current Research Aspects in Tool Based Micromachining Processes | Materials and Manufacturing Processes | Vol 29 No.11-12 ., 1291-1337 | 2014 |
| 46. | Leo Kumar, S.P., Jerald, J., Kumanan, S., Aniket, N. | An intelligent process planning system for micro turn-mill parts | International J. of Production Research | Vol 52 No.20.,6052-6075 | 2014 |
| 47. | Leo Kumar, S.P., Jerald, J., Kumanan, S., & Chandrakar, H.V. | Experimental Investigation and Optimization of Process Paramerter in Micro-Electrical Discharge Machining | Interanational J. of Manufacturing Technology and Management | Vol.27, Nos.1/2/3 .,88-100 | 2013 |
| 48. | Edwin Raja Dhas, J., Kumanan S. | Modeling and prediction of HAZ using finite element and neural network modeling | J. of Advances in Production Engineering and Management | 13-24 | 2013 |
| 49. | Ahilan, C., Somasundaram Kumanan., Sivakumaran, N., Edwin Raja Dhas, J. | Modelling and Prediction of Machining Quality in CNC turning process using intelligent hybrid decision making tools | Applied Soft Computing | Vol 13., 1543-1551 | 2013 |
| 50. | Kumar, K., Kumanan, S. | Integrated Facililty location - analysis using Mathematical Modeling | National J. of Technology | Vol 9 No 2 17-23 | 2012 |
| 51. | Udhayakumar, P ., Kumanan, S. | Some metaheuristic approaches for optimising tardiness of job and tool in a flexible manufacturing system | International J. of Advanced Operations Management | Vol4,No.3., 219-252, 2012 | 2012 |
| 52. | Prasanna Venkatesan, S., Kumanan, S. | Supply Chain Risk prioritazation using a hybrid MCDM approach | Advanced Materials Research | Vol 488-499., 406-410, 2012 | 2012 |
| 53. | Prasanna Venkatesan, S., Kumanan, S. | A Multiobjective discrete particle swarm optimization algorithm for supply chain network design | International J. of Logistics Systems and Management | Vol11: 375-406 | 2012 |
| 54. | Ilangkumaran, M., Kumanan, S. | Application of Hybrid Vikor Model in selection of maintenace strategy | International J. of Information system and supply chain managemenet | Vol.5,No.2: 59-81 | 2012 |
| 55. | Dev Anand, M., Selvaraj, T., Kumanan, S. | Fault detection and Fault Tolerance methods for Industrial Robot Manipulators based on hybrid intelligent approach | J. of Advances in Production Engineering and Management | No 7 :213-224 | 2012 |
| 56. | Udhayakumar, P., Kumanan,S. | Integrated Scheduling of FMS using evolutionary algorithms | International of Advanced Manufacturing and Technology | Vol.61 No 5-8: 621-635 2012 | 2012 |
| 57. | Prasanna Venkatesan,S., Kumanan, S. | Multi Objective Supply Chain Sourcing Strategy Design under Risk using PSO and Simulation | International J. of Advanced Manufacturing and Technology | Vol 61, No 1-4: 325-337 2012 | 2012 |
| 58. | Prasanna Venkatesan, S., Kumanan, S. | Supply Chain Risk Prioritization using a hybrid AHP and PROMOTHEE approach | International J. of Services and Operations Management | V. 13, No 1, pp. 19-41 2012 | 2012 |
| 59. | Edwin Raja Dhas, J., Kumanan,S Jesuthanam, C.P. | Prediction of Weld Quality using intelligent decision making tools | Artificial Intelligence Research | Vol.11, No 2: 131-148 | 2012 |
| 60. | Dev Anand, M ., Selvaraj, T., Kumanan, S. | Robotics in online inspection and quality control using moment algorithm | J. of Advances in Production Engineering and Management | Vol 7: 27-38 | 2012 |
| 61. | Kumar, K., Kumanan, S. | Decsion making in location selection : An Integrated Approach with clustering and Topsis | IUP J. of Operations Management | Vol.11, No.1: 1-14 | 2011 |
| 62. | Ahilan, C., Kumanan, S., Sivakumaran, N. | Optimization of CNC turning of AISI 304 Austenitic Stainless Steel using Grey Based Fuzzy logic with multiple performance characteristics | J. of machining and forming Technologies | Vol 3,No 3-4(6): 231-250 | 2011 |
| 63. | Ahilan, C., Kumanan, S., Sivakumaran, N. | Online Performance assessment of heat exchanger using artificial neural networks | International J. of energy and environment (IJEE) | Vol 2, No5: 829-844 | 2011 |
| 64. | Sandeep, M., Kumanan, S., Vinodh, S. | Application of Fuzzy SMART approach for supplier selection | International J. of Services and Operations Management | Vol 9, No.3: 365-388 | 2011 |
| 65. | Edwin Raja Dhas, J., Kumanan, S. | Modelling of residual stress in Butt Welding | Materials and Manufacturing Processes | Vol. 26: 1-6 | 2011 |
| 66. | Edwin Raja Dhas, J., Kumanan, S. | Optimization of Parameters for Submerged Arc weld using Non Conventional Techniques | Applied Soft Computing | Vol 11: 5198-5204 | 2011 |
| 67. | Sandeep, M., Kumanan, S., Vinodh, S. | Supplier selection using combined AHP and GRA for a pump manufacturing industry | International J. of Logistics Systems and Management | Vol 10, No.1: 40-52 | 2011 |
| 68. | Kumar, K., Kumanan, S. | An Integrated Fuzzy QFD and AHP Approach for Facility Location Selection | IUP J. of Supply Cahin Management | Vol.VIII No 4 Page 1-12 | 2010 |
| 69. | Edwin Raja Dhas, J., Kumanan,S | Weld residual prediction using Artificial neural networks and fuzzy logic modeling | Indian J. of Engineering and Material science | Vol.18 351-360 | 2010 |
| 70. | Udhayakumar, P., Kumanan, S. | Sequencing and scheduling of job and tool in a flexible manufacturing system using Ant Colony Optimization algorithm | International J. of Advanced Manufacturing Technology | Vol.50: 1075-1084 | 2010 |
| 71. | Ahilan, C., Kumanan, S., Sivakumaran, N. | Application of taguchi based grey relational analysis in multi objective optimization of turning process | J. of Advances in Production Engineering and Management | Vol.5,No. 3: 171-180 | 2010 |
| 72. | Satheesh Kumar, R.M., Asokan, P., Kumanan, S. | Artificial Immune System based algorithm to solve linear and loop layout problems in Flexible Manufacturing System | International J. of Product Development | Vol 10 No.1-3: 165-179 | 2010 |
| 73. | Prasanna Venkatesan, S., Kumanan, S. | Bicriteria allocation of customers to warehouses using a particle swarm optimisation | International J. of Operational Research | Vol.9, No.1: 65-81,2010 | 2010 |
| 74. | Dev Anand, M., Selvaraj, T., Kumanan, S. | A Neuro fuzzy based fault detection and fault tolerance methods for Industrial Robot Manipulators | International J. of Adaptive and Innovative systems | Vol 1 3/4 334-371 | 2010 |
| 75. | Ahilan, C ., Kumanan, S., Sivakumaran, N. | Design and Implementation of an intelligent controller for a spilit air conditioner with energy saving | AMSE J. of advances in Modeling,- Series C : Automatic control (AMSE) | 65(1) 21-40 | 2010 |
| 76. | Edwin Raja Dhas, J., Kumanan,S | Modelling and optimization of submerged arc welding process parameters using particle swarm optimization technique | International J. of Enterprise Network Management | Vol. 4 Issue 2 154-165 | 2010 |
| 77. | Bobin Cherian Jos., Kumanan, S. | Selection of partner companies in extended enterprise using fuzzy AHP | International J. of services, economics and Management | Vol 2 3/4 322-339 | 2010 |
| 78. | Udhayakumar, P., Kumanan, S. | Task Scheduling of AGV in FMS using Non traditional optimisation techniques | International J. of Simulation Modelling | Vol.9, No.1: 28-39, 2010 | 2010 |
| 79. | Edwin Raja Dhas, J., Kumanan, S. | Weld Quality Prediction of submerged arc welding process using a function replacing hybrid system | J. of Advances in Production Engineering and Management | Vol.5, No1: 5-12, 2010 | 2010 |
| 80. | Edwin Raja Dhas J ., Kumanan,S | Effect of process Parameters in bead geometry and hardness in submerged arc weld on mild steel | National J. of Technology | Vol.6 N 2:66 -74 | 2010 |
| 81. | Edwin Raja Dhas J., Kumanan, S. | Neuro hybrid model to predict weld bead width in submerged arc welding process | J. of Scientific and Industrial Research | Vol.66 N 4: 350-355 | 2010 |
| 82. | Leo Kumar, S.P., Kumanan, S ., Ahilan, C ., Mohan Kumar, R.S. | Automation of blanking die desigh parameters selection using an intelligent system | J. of Emerging technology in mechanical science and engineering | Vol.1 No.1 9-13 | 2010 |
| 83. | Kumanan, S ., Kumar, K ., Edwin Raja Dhas, J. | Location selection- An Intergrated PSO with fuzzy clustering approach | J. of Emerging technology in mechanical science and engineering | Vol.1 No.1 31-42 | 2010 |
| 84. | Satheesh Kumar, R.M, Asokan, P., Kumanan, S. | Artificial Immune System based algorithm for unidirectional loop layout problem in Flexible Manufacturing System" | International J. of Advanced Manufacturing and Technology | Volume 40, Numbers 5-6 553-565 | 2009 |
| 85. | Kumanan, S ., Raja, K. | Multi Project scheduling using a Heuristic and Memetic algorithm | International J. of Manufacturing science and Production | Vol 10 249-258 | 2009 |
| 86. | Dev Anand, M., Selvaraj, T., Kumanan, S. | A Neuro-Fuzzy Based Positioning System of Stationary Robot Manipulator Arm | International J. of Information Intelligence and Knowledge | Vol 2 Issue 1 35-52 | 2009 |
| 87. | Ahilan, C., Kumanan, S., Sivakumaran, N. | Multiobjective optimization of CNC turning process using grey based fuzzy logic | International J. of Machining and Machinability of materials | Vol 5 No.4 434-451 | 2009 |
| 88. | Ilangkumaran, M., Kumanan, S. | Selection of maintenance policy for textile industry using hybrid Multicriteria Decision Making approach | International J. of Manufacturing technolgy and management | volume 20, issue 7 -: 1009 - 1022 | 2009 |
| 89. | Prasanna Venkatesan, S., Kumanan, S, Karthik, S. | Multi-Criteria Decision Making in a Supply Chain Using a Genetic Algorithm | The Icfai University J. of Supply Chain Management | Vol.6, No. 2: 67-82 | 2009 |
| 90. | Edwin Raja Dhas, J., Kumanan, S. | Prediction of weld bead width in SAW of mild steel fuzzy logic system | J. of Manufacturing engineering | Vol.4, Issue.3: 188-192 | 2009 |
| 91. | Dev Anand, M., Selvaraj, T., Kumanan, S., Austin Johnny, M. | Application of multi criteria decision making for selection of robotic system using Fuzzy AHP | International J. of Management and Decision Making | Vol 9 No.1 75-98 | 2008 |
| 92. | Kumanan, S., Jesuthanam,C.P, Ashok Kumar, R. | Application of multiple regression and ANFIS for the prediction of surface roughness | International J. of Advanced Manufacturing Technology | Vol. 35, n 7-8, 778-788 | 2008 |
| 93. | Dev Anand , M., Selvaraj, T., Kumanan, S. | Fault Detection and Isolation in Robotic Manipulator via Hybrid Neural Networks, | International J. of Simulation Modelling | Vol 1, 5-16 | 2008 |
| 94. | Satheesh kumar, R.M., Asokan, P., Kumanan, S. | Design of loop layout problem in Flexible Manufacturing System using non traditional optimization technique | International J. of Advanced Manufacturing and Technology | Vol 38, No 5-6: 594-599 | 2008 |
| 95. | Kumanan, S., Raja, K. | Modeling and Simulation of Projects with Petrinets | American J. of Applied Science | 5 (12) 1742-1749 | 2008 |
| 96. | Kumanan, S., Raja, K. | Petrinets with Particle Swarm optimization technique for resource leveling | International J. for Manufacturing science Production | Vol 9 No 3-4,193-202 | 2008 |
| 97. | Dev Anand , M., Selvaraj, T., Kumanan, S., & Janarthanan, J. | Fault Diagnosis System for a Robot Manipulator through Neuro Fuzzy Approach | International J. of Modeling Identification and Control | Vol 3 (2): 181-192 | 2008 |
| 98. | Shyjit, K., Ilangkumaran, M., Kumanan, S. | Multicriteria Decision Making approach to evaluate optimum maintenance strategy in textile industry | International J. of Quality in Maintenance Engineering | Vol. 14, No.4, 375-386 2008. | 2008 |
| 99. | Satheesh kumar, R.M., Asokan, P., Kumanan, S., Varma, B. | Scatter Search algorithm for single row layout in FMS | J. of Advances in Production Engineering and Management | Vol 3 No 4 193-204 | 2008 |
| 100. | Dev Anand, M., Selvaraj, T., Kumanan, S. | An Adaptive fuzzy logic approach for fault detection in Robot manipulators with parametric uncertainity | Manufacturing Technology Today | Vol.7 No.2:15-23 | 2007 |
| 101. | Shajahan, C, J., Kumanan, S. | Modeling and Simulation of Product Development Process using Simquick | Manufacturing Technology Today | Vol.7(1)3-7 | 2007 |
| 102. | Dev Anand, M., Janarthanan, J., Selvaraj, T., Kumanan, S. | A Hybrid Fuzzy Logic and Artificial Neural Networks Algorithm Based Fault Detection and Isolation for Industrial Robot Manipulators | International J. of Manufacturing Research | V2 N0 3 279-302 | 2007 |
| 103. | Kumanan, S., Jesuthanam, C.P., Ashok Kumar, R. | Application Of Multiple Regression and the development of a Predictive Neural Network Trained By Genetic Algorithm For Machining Quality Prediction | International J. of Manufacturing science and Technology | Vol 10 No 2 85-96 | 2007 |
| 104. | Udhayakumar, P., Kumanan, S., Asokan, P. | Job And Tool Sequencing In Flexible Manufacturing System Using A Particle Swarm Optimization Technique | International J. of Manufacturing science and Technology | vol 9 No 2 p.55-66 | 2007 |
| 105. | Dev Anand, M., Selvaraj, T., Kumanan, S., Austin Johnny, M. | Identification and Specification Of Robot Kinematic Parameters Using Artificial Neural Networks | International J. for Manufacturing Science and Technology | Vol 9 No 2,33 -46 | 2007 |
| 106. | Chandrasekaran, M., Asokan, P., Kumanan, S., Arunachalam, S. | Application of selective breeding algorithm for job shop scheduling problems | International J. for Manufacturing Science and Technology | Vol 9 No 1 103- 118 | 2007 |
| 107. | Chandrasekaran, M., Asokan, P., Kumanan, S., Umamaheswari, S., Rao, C.S.P. | Multi Objective Optimization for Job shop scheduling using Sheep Flocks Heredity Model Algorithm | International J. of Manufacturing Science and Technology | Vol 9 No 2 p.47 -54 | 2007 |
| 108. | Moorthy, P.S.S., Kumanan, S., Pradeep Kumar, V. | Delinquency Stage Prediction using Markov Processes and Logistic Regression | International J. of applied Management | Tech.170-181 V5 | 2007 |
| 109. | Raja, K., Kumanan, S. | Resource Leveling using Petrinet and Memetic Approach | American J. of Applied Science | 4 (5) 317-322 | 2007 |
| 110. | Kumanan, S., Edwin Raja Dhas, J., Ashok Kumar, R. | Development of Welding Residual Stress Predictor using a Function-Replacing Hybrid System | International J. of Advanced Manufacturing Technology | Vol.31, No 11-12:1083?1091 | 2007 |
| 111. | Kumanan,S., Prasanna Venkatesan, S., Prasanna Kumar, J. | Optimization of supply chain logistics network using random search techniques | International J. of Logistics Systems and Management | Vol 3, No.2: 252-266 | 2007 |
| 112. | Siva Sankar, R., Asokan, P., Saravanan, R., Kumanan, S., Prabhaharan, G. | Selection of machining parameters for constrained machining problem using evolutionary computation | International J. of Advanced Manufacturing Technology | 892 ? 901, Vol 32 9-10 | 2007 |
| 113. | Jesuthanam, C.P., Kumanan, S., Asokan, P. | Surface roughness prediction using hybrid neural network | Machining Science and Technology | Vol 11 Issue 2: 271-286 | 2007 |
| 114. | Edwin Raja Dhas, J., Kumanan, S. | ANFIS for prediction of weld bead width in Submerged Arc Welding Process. | J. of Scientific and Industrial Research | Vol.66 No.4:335-338 | 2007 |
| 115. | Kumanan, S., Edwin Raja Dhas, J., Gowthaman, J. | Determination of SAW process parameters using taguchi method and regression analysis | Indian J. of Engineering and Material science | Vol.14:103-111 | 2007 |
| 116. | Christu Paul, R., Asokan,P., Kumanan, S. | Facility Layout Design Using Particle Swarm Approach | Manufacturing Technology Today | Vol.6 No.7: 23-28 | 2007 |
| 117. | Nanne sahib, S.K., Kumanan, S. | Modeling Of Hot Extrusion Process Using Artificial Neural Networks Implanted With Genetic Algorithm | J. of Manufacturing Engineering | Vol.2, Issue.4 | 2007 |
| 118. | Jesuthanam, C.P., Kumanan, S. | Prediction of surface roughness in turning using RBFNN-FL technique | Manufacturing Technology Today | Vol.6 No.5 :22-26 | 2006 |
| 119. | Edwin Raja Dhas, J., Kumanan, S. | Prediction of weld bead geometry in SAW using regression method | Manufacturing TechnologyToday | Vol.6 No.11: 31-34 | 2006 |
| 120. | Kumanan, S., Krishnaiah Chetty, O.V. | Estimating Product Development Cycle Time using Petrinets | International J. of Advanced Manufacturing Technology | 28(1-2):215-220 | 2006 |
| 121. | Dev Anand, M., Selvaraj, T., Kumanan, S., Austin Johnny, M. | Path optimization algorithm for an autonomous mobile Robot | International J. of Applied Management Technology | V4 No 2 149-161 | 2006 |
| 122. | Kumanan, S., Babu, M., Shajahan, C.A. | Modeling, Simulation and Analysis of Product Development Process Using MSEXCEL | Int Jrl applied Management Tech. | V4 No 2 125-139 | 2006 |
| 123. | Chandrasekaran, M., Asokan, P., Kumanan, S., Balamurugan, T. | Sheep Flocks Heredity Model Algorithm for Solving Job Shop Scheduling Problems | International J. of Applied Management and Technology | Vol 4 No 1 pp 79-100 | 2006 |
| 124. | Kumanan, S., Jegan Jose, G, Raja, K. | Multi-Project Scheduling using a Heuristic and a Genetic Algorithm | International J. of Advanced Manufacturing Technology | v31 3-4 p360-366 | 2006 |
| 125. | Satishkumar, S., Asokan, P., Kumanan, S. | Optimization Of Depth Of Cut In Multipass Turning Using Nontraditional Optimization Techniques | International J. of Advanced Manufacturing Technology | V29 N3-4 232-238 | 2006 |
| 126. | Kumanan, S., Prasanna Venkatesan, S., Kumar, K., & Prasanna Kumar, J. | Performance Analysis Of Supply Chain Logistics Network using Genetic Algorithm and Simulation | International J. Agile Systems and Management | V1 N4 450-462 | 2006 |
| 127. | Chandrasekaran, M., Asokan, P., Kumanan, S., Balamurugan, T., Nickolas, S. | Solving Job Shop Scheduling Problem using artificial immune system | International J. of Advanced Manufacturing Technology | V31 N 5-6 580-593 | 2006 |
| 128. | Srinivasa Raman, V., Barathi Raja,K., Asokan, P., & Kumanan, S. | Meta heursitic approach for multi objective gear box optimization | Manufacturing Technology Today | Vol.1, No.1: 29-39 | 2006 |
| 129. | Kumanan, S., Prasanna Venkatesan, S., Balakumaran, S. | Multi objective optimization of supply chain logistics network using a genetic algorithm | J. of Management Research | Vol.1 No.3: 43-53 | 2006 |
| 130. | Srinivasa Raman, V., Barathi Raja, K ., Asokan, P., Kumanan, S. | Multi Speed Gear Box Design using Swarm intelligence | Manufacturing Technology Today | Vol.5:14-19 | 2006 |
| 131. | Ravi Kumar, R., Narendar Singh, N., Asokan, P., Kumanan, S. | Optimisation of Parameters in Electric Discharge Machining using Genetic Algorithm | Manufacturing Technology Today | Vol.5:12-14 | 2006 |
| 132. | Kumanan, S., Nanne saheb, S, K., & Jesudhanam, C.P. | Prediction of Machining Forces using Neural networks trained by Genetic Algorithm | J. of Institution of Engineers (India) | Vol.87: 11-15 | 2006 |
| 133. | Udhayakumar, P., Kumanan, S., Asokan, P. | Routing and Dispatching of Automated Guided Vehicles in a Flexible Manufacturing Systems using Simulated Annealing Algorithm | Manufacturing Technology Today | Vol.5 5-8 | 2006 |
| 134. | Asokan, P., Kumanan, S., Sathish Kumar, S. | Selection of optimal conditions for CNC multi-pass face milling system using evolutionary computation | Manufacturing Technology Today | Vol.5: 26-30 | 2005 |
| 135. | Kumanan, S., Edwin Raja Dhas, J., Murugan, N. | Welding Process control and optimization | Welding J. | IWS :19-27 | 2005 |
| 136. | Kumanan, S., Prasanna Venkatesan, S., Prasanna Kumar, J. | A Genetic Algorithm for Optimization Of Supply Chain Logistics Network | International J. of Applied Management and Technology | 3 (2): 41-51 | 2005 |
| 137. | Siva Sankar, R ., Asokan, P., Kumanan,S., Selvaraj, T. | Adaptive Genetic Algorithm Approach For Optimization Of Multi Pass Turning Operations | Manufacturing Technology Today | Vol.4,No.5:12-16 | 2005 |
| 138. | Kumanan, S., Prasanna Kumar, J., Kumar, K. | Facility Location in a Supply Chain Network using Microsoft Excel | Productivity | Vol.46,.2-3: 346-350 | 2004 |
| 139. | Kumanan, S., Prasanna Venkatesan, S. | Supply Chain Simulation using Excel | Industrial Engineering J. | Vol.34 (11):10-11 | 2004 |
| 140. | Prashant Reddy, J., Kumanan, S., & Krishnaiah Chetty, O.V. | Application of Petrinets and a genetic algorithm to multi mode multi resource constrained Project Scheduling | International J. of Advanced Manufacturing Technology | V17 305-314 | 1998 |
