International Journals

  1. R.Narayanasamy, S.M.Doraivelu and V.Gopinathan, "A comparative study of deep drawing with conventional isostatic and hydrostatic pressure", Journal of Mechanical working Technology, Vol.6, 1982, pp 227-234.
  2. R.Narayanasamy, R.S.N.Moorthy, K.Viswanathan and G.R.Charry, "Prediction of Barreling of solid cylinders under axial compressive load", Journal of Mechanical working Technology, Vol.16, 1988, pp 21-30, U.K.
  3. R.Narayanasamy and R.Sowerby, "Forming behaviour of some sheet materials when drawing through a conical die", Journal of Materials Processing Technology, Vol.39, 1993, pp 43-53.
  4. R.Narayanasamy and R.Sowerby, "Wrinkling behaviour of some sheet metals when drawing through a conical die", Journal of Materials Processing Technology, Vol.41, 1994, pp 275-290.
  5. R.Narayanasamy and R.Sowerby, "Wrinkling behaviour of Cold rolled sheet metals when drawing through a tractrix die", Journal of materials technology, Vol. 49, 1995, pp. 199-211.
  6. R.Narayanasamy and K.S.Pandey, "Barreling of porous solid cylinders under axial compression", Journal of P/M Science and Technology, Vol.1, 1990, pp.23-34.
  7. R.Narayanasamy and K.S.Pandey, "Studies on the barreling of powder preforms during upsetting", Journal of P/M Science and Technology, vol.1, 1990, pp. 10-23.
  8. R.Narayanasamy and K.S.Pandey, "Theoretical aspects on barrelling in porous materials", Proceedings of the Transactions of PMAI, Dec. Vol.20, 1993, pp.33-40.
  9. R.Narayanasamy and K.S.Pandey, "Hardening behaviour in sintered Al-Alumina composite performs during cold deformation", Journal of P/M Science and Tech., vol.5, Jan.1994, pp. 5-12.
  10. R.Narayanasamy and K.S.Pandey, "Densification in Al-Alumina composite sintered preforms during Deformation", Accepted for the Journal of P/M Science and Technology, In print, 2003.
  11. R.Narayanasamy and K.S.Pandey, "Effect of densification in Al-Alumina composite sintered performs during deformation", Accepted for the Journal of P/M Science and Technology, 2003.
  12. R.Narayanasamy and K.S.Pandey, "Effect of annealing and with no annealing on strain hardening behaviour in sintered Al-Alumina composite performs during cold deformation", Journal of Materials Processing Technology, U.K., Vol. 84, 1998, pp. 143-148.
  13. R.Narayanasamy and K.S.Pandey, "Wrinkling phenomenon in drawing during the use of cold rolled Al and copper sheets", Journal of IES, Singapore, Vol.40, No.4, 2000, pp.13-29.
  14. R.Narayanasamy and K.S.Pandey, "Forming behaviour of steel sheets when drawing through taper dies", Printed, Journal of IES, Singapore, 2000.
  15. R.Narayanasamy and K.S.Pandey, "Some aspects of Work hardening in Sintered Aluminium Iron composite performs during cold axial forming", Journal of Materials Processing of Tech, 84, 1998, pp. 136-142.
  16. R.Narayanasamy and K.S.Pandey, "Phenomenon of barrelling in Al solid cylinders during cold upset forming", Journal of Material processing Tech., U.K. 70(1997) pp.17-21.
  17. R.Narayanasamy and K.S.Pandey, "Salient features in cold upset forming of sintered Al-3.5% Alumina powder composite performs", Journal of materials processing of Tech., U.K., 72(1997) pp.201-207.
  18. R.Narayanasamy and K.S.Pandey, "A study on barrelling of sintered Iron preforms during Hot upset forging", Journal of Material Processing Tech., Vol.100, 2000, pp. 87-94.
  19. R.Narayanasamy and K.S.Pandey, "Uniaxial compressive behaviour of ductile cast irons at room temperature", in print, Journal of Materials Processing Tech., U.K., 2003.
  20. R.Narayanasamy and K.S.Pandey, "Barrelling behaviour of ductile cast irons during upsetting", Communicated to Journal of Mat. Processing Tech., U.K., 2003.
  21. A.J.R.Inigoraj, R.Narayanasamy and K.S.Pandey, "Work hardening behaviour in sintered Aluminium-Alumina composite preforms during cold deformation", International Journal of P/M Science and Technology, Vol.5, No.2, 1993,. pp.5-12.
  22. A.J.R.Inigoraj, R.Narayanasamy and K.S.Pandey, "Strain hardening behaviour in sintered aluminium-3.5% Alumina composite preforms during axial compression with and without annealing", Journal of Materials Processing Technology, Vol. 84, 1998, pp.143-148.
  23. R.Narayanasamy and R.Ponalagusamy, "A Mathematical theory of plasticity for compressible P/M materials", Journal of Materials Processing Tech., Vol.86, 1998, pp 159-162.
  24. R.Narayanasamy and R.Ponalagusamy, "A Mathematical theory of plasticity for the upsetting forming of P/M materials", Journal of Materials Processing Tech., Vol.97, 2000, pp 107-109.
  25. R.Narayanasamy and R.Ponalagusamy, "A Mathematical theory of plasticity for compressible Powder Metallurgy materials-Part II, Journal of Materials Processing Tech., Vol.97, 2000, pp 110-113.
  26. R.Narayanasamy and R.Ponalagusamy, "Finite element method for Analysis of open die Forging of Sintered cylindrical Billets", Communicated to Journal of Manufacturing Technology, 2005.
  27. R.Narayanasamy and R.Ponalagusamy, "A mathematical theory of plasticity for compressible powder metallurgy materials - Part-Ill", Journal of Materials Processing Technology, Vol.100, 2000, pp.262-265.
  28. R.Narayanasamy, R.Ponalagusamy and K.R.Subramanian, "Prediction of limit strains in sheet metals by using new generalized yield criteria", Journal of Materials and Design , In Press, Corrected Proof, Available online 22 November 2005.
  29. R.Narayanasamy, R.Ponalagusamy and K.R.Subramanian, "Generalized yield criteria of porous sintered powder metallurgy metals", Journal of Materials Processing Technology, Vol.ll0, 2001, pp 182-185.
  30. R.Narayanasamy, R.Ponalagusamy and P.Srinivasan, "Effect of fifth order polynomial equation on performance for streamlined extrusion Dies", submitted to the Journal of Materials Processing Technology, 2003.
  31. R.Narayanasamy, R.Ponalagusamy and P.Srinivasan, "Computer Aided design and manufacture of streamlined extrusion dies ", Journal of Materials Processing Technology, Vol.138, Issues 1-3, 20 July 2003, pp 262-264.
  32. R.Narayanasamy, R.Ponalagusamy and P.Srinivasan, "Design of Streamlined extrusion dies A Bezier curve approach", Journal of Materials Processing Technology, Vol.161, 2005, pp 375-380.
  33. R.Narayanasamy, R.Ponalagusamy and P.Srinivasan, Design of streamlined extrusion dies using fifth order polynomial equations", Communicated to Journal of Materials Processing Technology, 2003.
  34. R.Narayanasamy, R.Ponalagusamy and P.Srinivasan, "Computer Aided Design of streamlined extrusion Dies for re-entry sections", Communicated to the Journal of Advanced Manufacturing Technology, U.K., 2003.
  35. R.Narayanasamy, R.Ponalagusamy and P.Srinivasan, "Upper bound analysis of Extrusion Dies Designed based on cosine profile", communicated to Journal of Material Processing Technology, U.K., 2003.
  36. R.Narayanasamy, R.Ponalagusamy and R.Venkatesan and P.Srinivasan, "An Upper bound Solution to Extrusion of Circular billet to circular shape through cosine dies", Journal of Materials and Design, Vol 27. Issue 5, 2006, pp 411-415.
  37. R.Narayanasamy, R.Ponalagusamy and R.Venkatesan, "Computer Aided Metal Flow analysis in streamlined Extrusion Dies", In Print, International Journal of Advanced Manufacturing Technology, 2003.
  38. R.Narayanasamy, R.Ponalagusamy and R.Venkatesan, "Computer Aided Metal flow analysis in Off-centric extrusion dies", In Print, International Journal of Manufacturing Technology and Research, 2003.
  39. R.Narayanasamy and V.Pakkirisamy, "Drawability of Austenitic stainless steels sheets during drawing through a Tractrix die", paper communicated to the Journal of Material Processing Tech., 2003.
  40. R.Narayanasamy and V.Pakkirisamy, "Uniaxial Tensile Behaviour of Stainless steel sheets at room temperature", paper communicated to the Journal of Materials Proc. Tech., U.K., 2003.
  41. R.Narayanasamy and V.Pakkirisamy, "Effect of Mechanical properties on drawability of stainless steel sheets", paper communicated to IES Journal of Manufacturing, Singapore, 2003.
  42. R.Narayanasamy and S.Sathiyanarayanan, "Uniaxial tensile behaviour of ZM-21 Magnesium alloy at room temperature", Journal of Material Processing Tech., Vol.102, 2000, pp 56-58.
  43. R.Narayanasamy and S.Sathiyanarayanan, "A study on Barrelling in Magnesium alloy solid cylinders during cold upset forming", Journal of Material Processing Tech., Vol.101, 2000, pp 64-69.
  44. R.Narayanasamy and S.Sathiyanarayanan, "Comparative study in barrelling of non-ferrous solids during cold upset forming", Printed, Journal of IES, Singapore, 2000.
  45. R.Narayanasamy and K.Duraiselvam, "CAD/CAM of streamlined extrusion dies", Journal of Institution Engineers of Singapore, Vol.40, 2000, pp.35-39.
  46. R.Narayanasamy and S.Malayappan, "Barrelling of Aluminum solid cylinders during cold upset forging with constraint at both ends", Communicated to International Journal of Advance Manufacturing, U.K., 2003.
  47. R.Narayanasamy and S.Malayappan, "Barrelling phenomenon in Al solid cylinders during cold upset forging with lubricants", In print, Journal of Material Processing Technology, U.K., 2003.
  48. R.Narayanasamy and S.Malayappan, "Some aspects on barrelling in Aluminium solid cylinders during cold upset forging using a die with constraints", Journal of Materials Processing Technology, Vol.135, 2003, pp 18-29.
  49. R.Narayanasamy and S.Malayappan, "Barrelling of Aluminium solid cylinders during cold upset forging with constraint at one end", Materials Science and Technology, Vol.19, 2003, pp.1-6.
  50. S.Malayappan and R.Narayanasamy, "Barrelling of Aluminium solid cylinders during cold upset forging with constraint at one end", Journal of Materials Science and Technology, Vol.19, April 2003, pp.507-5ll.
  51. S.Malayappan and R.Narayanasamy, "Some observations on barrelling of Aluminium solid cylinders during cold upsetting using different lubricants", Journal of Materials Science and Technology, Vol.19, Dec.2003, pp.1-5.
  52. S.Malayappan and R.Narayanasamy, "An Experimental analysis of upset forging of aluminium cylindrical billets considering the dissimilar frictional conditions at flat die surfaces", in print, International Journal of Advanced Manufacturing Technology, 2004.
  53. S.Malayappan and R.Narayanasamy, "Barrelling of Aluminium solid cylinders during cold upset forging with an extrusion die at one end", In print, International Journal of Advanced Manufacturing Technology, 2004.
  54. R.Narayanasamy and S.Malayappan, "Observations of barrelling in Aluminium solid cylinders during cold upsetting using different lubricants", Journal of Materials Science and Technology, Vol.19, Dec.2003, pp.1705-1708.
  55. K.Manisekar, R.Narayanasamy and S.Malayappan, "Effect of friction on barrelling in square billets of aluminium during cold upset forging", Journal of Materials and Design, Vol. 27, Issue 2, 2006, pp.147-155.
  56. R.Narayanasamy and K.Manisekar, "Phenomenon of barrelling of square Al billets during upset forging", communicated to the Journal of Materials Processing Tech., 2003.
  57. R.Narayanasamy and K.Manisekar, "Phenomenon of barrelling of rectangular shaped Al solid billets during upset forging", communicated to the Journal of Materials Processing Technology, 2003.
  58. R.Narayanasamy and K.Manisekar, "Effect of Barrelling in square Billets of Aluminium with lubricants during cold upset forging", Communicated to the Journal of Material Processing Technology, U.K., 2003.
  59. R.Narayanasamy and K.Manisekar, "Barrelling in rectangular shape billets of Aluminium with no lubricants during cold upset forging", Communicated to International Journal of Advance Manufacturing, U.K., 2003.
  60. R.Narayanasamy and K.Manisekar, "Phenomenon of barrelling in square billets of Aluminium during cold upset forging", International Journal of advanced manufacturing technology, Vol.21, 2003, pp.84-90. .
  61. N.Selvakumar and R.Narayanasamy, "Phenomenon of strain hardening behaviour of sintered Aluminium preforms during cold axial forming", Journal of Materials Processing Technology, Vol.142 (2), 2003, pp.347-354.
  62. N.Selvakumar and R.Narayanasamy, "Some aspects on cold upset forming of sintered aluminium preforms by using different lubricants", In print, Materials Science and Technology, U.K., 2003.
  63. R.Narayanasamy and N.Selvakumar, "Some aspects of cold upset forming of sintered Al preforms using graphite lubricant", Materials Science and Tech., U.K., Vol.19, No.11, Nov.2003, pp.1507-1512.
  64. N.Selvakumar and R.Narayanasamy, "Neural network model for predicting the strain hardening and densification constants of sintered aluminium preforms" International Journal of Powder Metallurgy, Vol.47, No.3, 2004, pp.261-266.
  65. R.Narayanasamy, N.Selvakumar and K.S.Pandey, "Some aspects of Cold upset forming of sintered aluminium preforms", In print, International Journal of Advanced Manufacturing, 2003.
  66. R.Narayanasamy, N.Selvakumar and K.S.Pandey, "Some aspects of cold upset forming of sintered aluminium preforms using different lubricants", Journal of Materials Science and Technology, Vol.20, April 2004, pp.1-5.
  67. S. Malayappan and R.Narayanasamy , " Axial cold upsetting of aluminium powder cylindrical preforms", Journal of the Institution of Engineers, Singapore, Vol.44, Issues 4, 2004, pp.79-86.
  68. R.Narayanasamy and K.Manisekar, " Phenomenon of barrelling in square billets of copper during cold upset forging", Journal of the Institution of Engineers, Singapore Vol.44, Issues 4, 2004.
  69. C.Loganathan, R.Narayanasamy and S.Sathiyanarayanan, "Effect of annealing on the wrinkling behaviour of the commercial pure aluminium grades when drawn through a conical die", Journal of Materials and Design, Correct Proof, Available online 12 April 2005.
  70. R.Narayanasamy, T.Ramesh and K.S.Pandey, "An investigation on strain hardening behaviour in three dimensions of aluminium-iron composite during cold upsetting", Materials Science and Engineering A, Vol.394, Issues 1-2, 15 March 2005, pp. 149-160.
  71. R.Narayanasamy, T.Ramesh and K.S.Pandey, "Some aspects on strain hardening behaviour in three dimensions of aluminium-iron powder metallurgy composite during cold upsetting", Materials and Design, In Press, Corrected Proof, Available online 16 February 2005.
  72. R.Narayanasamy, T.Ramesh and K.S.Pandey, "Workability studies on cold upsetting of Al-Al 2O 3 composite material", Materials and Design, In Press, Corrected Proof, Available online 3 February 2005.
  73. R.Narayanasamy, T.Ramesh and K.S.Pandey, "Some aspects on workability of aluminium-iron powder metallurgy composite during cold upsetting", Materials Science and Engineering A, Vol.391, 2005, pp 418-426.
  74. R.Narayanasamy and C.Sathiyanarayanan, "Forming limit diagram for interstitial free steel: Part 1", Materials Science and Engineering: A, Volume 399, Issues 1-2, 15 June 2005, pp. 292-307,.
  75. R.Narayanasamy and C.Sathiyanarayanan, "Forming limit diagram for Indian interstitial free steels", Materials and Design, In Press, Corrected Proof, Available online 1 June 2005.
  76. R.Narayanasamy, T.Ramesh and K.S.Pandey, "An experimental investigation of strain hardening behaviour of aluminium - 3.5 percent alumina composite during cold upsetting after subsequent annealing", Communicated to Journal of Composites Science and Technology, 2005.
  77. R.Narayanasamy, T.Ramesh and K.S.Pandey, "Some aspects on workability of copper - titanium carbide powder metallurgy composite during cold upsetting" Communicated to Journal of Composites Science and Technology, 2005.
  78. R.Narayanasamy, T.Ramesh and K.S.Pandey, "Some aspects on strain hardening behaviour of copper - titanium carbide powder metallurgy composite during cold upsetting" Communicated to Journal of Composites Science and Technology, 2005.
  79. R.Narayanasamy, T.Ramesh, K.S.Pandey and S.K.Pandey "New constitutive relationship for aluminium - alumina powder metallurgy composite during cold upsetting" Communicated to Journal of Composites Science and Technology, 2005.
  80. R.Narayanasamy, T.Ramesh and K.S.Pandey, "An experimental investigation on strain hardening behaviour of aluminium - 3.5 per cent alumina powder metallurgy composite performs under various stress states during cold upset forming" Communicated to Journal of Composites Science and Technology, 2005.
  81. R.Narayanasamy, V.Senthilkumar and K.S.Pandey, "Some aspects on hot forging features of P/M sintered iron preforms under various stress state conditions" In print, Journal of Mechanics of Material, 2005.
  82. R.Narayanasamy, K.Baskaran, "Some aspects of barrelling in elliptical shaped billets of aluminium during cold upset forging with lubricant", communicated to Journal of Mechanics of Materials, 2005.
  83. R.Narayanasamy and C.Loganathan, "Wrinkling of commercially pure aluminium sheet metals of different grades when drawn through conical and tractrix dies", communicated to Journal of Materials Science and Engineering A, 2005.
  84. R.Narayanasamy, T.Ramesh, K.S.Pandey and S.K.Pandey, "New constitutive relationship for copper - titanium carbide powder metallurgy composite during cold upsetting", Communicated to ASME Journal of Materials and Technology, 2005.
  85. R.Narayanasamy, T.Ramesh, K.S.Pandey and S.K.Pandey, "Effect of particle size on new constitutive relationship of aluminium - iron powder metallurgy composite during cold upsetting", Communicated to ASME Journal of Materials and Technology, 2005.
  86. R.Narayanasamy, T.Ramesh, K.S.Pandey and S.K.Pandey, "New constitutive relationship for aluminium - alumina powder metallurgy composite during cold upsetting after subsequent annealing", Communicated to ASME Journal of Materials and Technology, 2005.
  87. R.Narayanasamy and C.Sathiyanarayanan, "Evaluation of limiting strains and strain distribution for interstitial steel sheets while forming under different conditions", Communicated to Journal of Materials and Design, 2005.
  88. R.Narayanasamy and C.Sathiyanarayanan, "Experimental analysis and evaluation of forming limit diagram for interstitial free steels", communicated to Material Science and Engineering A, 2005.
  89. R.Narayanasamy, R.Ponalagusamy and R.Venkatesan, "Extrusion die profile and extrusion pressure optimisation using genetic algorithm", Journal of the Institution of Engineers, Singapore, vol.44, Issue3, . 2005, pp.1-13
  90. R.Narayanasamy and N.Selvakumar, "Some investigations on strain hardening behaviour of sintered aluminium preforms", Journal of the Institution of Engineers, Singapore, vol.44, Issue3, 2005, pp.71-85.
  91. R. Narayanasamy ,A.Syed Abu Thaheer, "Barrelling in truncated unlubricated zinc cone billets during cold upset forging", Journal of the Institution of Engineers, Singapore, vol.44, Issue3, 2005, pp.52-70.
  92. R.Narayanasamy and A.Syed Abu Thaheer "Barrelling in truncated zinc cone billets during cold upset forging", In Press, IES Journal of Singapore, 2005.
  93. C.Loganathan and R.Narayanasamy, "Effect of mechanical properties on wrinkling behaviour of commercially pure aluminium grades sheets when drawn through conical and tractrix dies", Materials Science and Engineering: A, Volume 406, Issues 1-2, 15 October 2005, pp. 229-253.
  94. R.Narayanasamy, C.Loganathan, "The influence of friction on the prediction of wrinkling of the prestrained blanks when drawing through a conical die", In Print, Journal of Materials and Design, 2005.
  95. R.Narayanasamy and N.Selvakumar, "Phenomenon of instantaneous strain hardening behaviour of sintered Al-Fe composite preforms during cold axial forming", communicated to Journal of Materials and Design, 2005.
  96. R.Narayanasamy, R.Ponalagusamy and S.Raghuraman, "Effect of strain rate sensitivity on theoretical prediction of LDR in cylindrical cup drawing process", communicated to Journal of Materials and Design, 2005.
  97. R.Narayanasamy and K.Baskaran, "Some aspects on work hardening during cold upset forging of elliptical shaped billets of aluminium with lubricant", communicated to Journal of Materials and Design, 2005.
  98. N.Selvakumar and R.Narayanasamy, "Deformation behaviour of cold forming of sintered Al-Fe composite preforms", Journal of Engineering Materials and Technology, Transactions of the ASME, vol. 127, April 2005, pp. 251-256.
  99. N.Selvakumar and R.Narayanasamy "Some investigations on strain hardening behaviour of sintered aluminium preforms with no lubricant during cold upsetting" in-print, IES Journal, Singapore, May 2005.
  100. R.Narayanasamy, T.Ramesh and K.S.Pandey, " Some aspects of workability studies in cold forging of pure aluminium powder metallurgy compacts", Journal of Materials Science and Technology, Vol. 21, Issue 8, 2005, pp. 912-916.
  101. A.Syed Abu Thaheer and R.Narayanasamy, " Barrelling in truncated lubricated zinc cone billets during cold upset forging", Journal of Materials and Design, In Press, Corrected Proof, Available online 2 November 2005.
  102. K. Manisekar and R. Narayanasamy, "Effect of friction on barrelling in square and rectangular billets of aluminium during cold upset forging", Materials and Design, In Press, Corrected Proof, Available online 23 September 2005.
  103. R. Narayanasamy and C. Sathiya Narayanan, " Wrinkling behaviour of interstitial free steel sheets when drawn through tapered dies", Materials and Design, In Press, Corrected Proof, Available online 2 September 2005.
  104. R. Narayanasamy and C. Sathiya Narayanan , " Forming limit diagram for interstitial free steels supplied by Ford India Motors", Materials and Design, In Press, Corrected Proof, Available online 15 August 2005.
  105. N. Selvakumar, P. Ganesan, P. Radha, R. Narayanasamy and K.S. Pandey "Modelling the effect of particle size and iron content on forming of Al-Fe composite preforms using neural network", Materials and Design, In Press, Corrected Proof, Available online 11 July 2005.
  106. R. Narayanasamy , T. Ramesh and K.S. Pandey , "An investigation on instantaneous strain hardening behaviour in three dimensions of aluminium-iron composites during cold upsetting", Materials Science and Engineering A, Volume 394, Issues 1-2, 15 March 2005, Pages 149-160
  107. R.Narayanasamy and C.Sathiya Narayanan, "Forming Limit Diagram and Crystallograhic Textures of Annealed IF Steels", Communicated to Journal of Materials and Design, 2005.
  108. R.Narayanasamy and C. Loaganathan, " Study on wrinkling limit of commercially pure aluminium sheet metals of different grades when drawn through conical and tractrix dies", Communicated to Journal of Materials Science and Engineering A. 2005.
  109. R.Narayanasamy , C. Loaganathan and J.Satheesh, " Study on wrinkling limit of interstitial free steel sheets of different thickness when drawn through conical and tractrix dies", Communicated to Journal of Materials and Design, 2005.
  110. R.Narayanasamy , C. Loaganathan and J.Satheesh, " Some study on wrinkling behaviour of commercially pure aluminium sheet metals of different grades when drawn through conical and tractrix dies", Communicated to Journal of Materials and Design, 2005.

 1.Some aspects of barrelling in elliptical shaped billets of aluminium during cold upset forging with lubricant
Materials & Design, Volume 29, Issue 3, 2008, Pages 638-661
K. Baskaran and R. Narayanasamy		 
 2.Wrinkling behaviour of different grades of annealed commercially pure aluminium sheets when drawing through a conical die
Materials & Design, Volume 29, Issue 3, 2008, Pages 662-700
C. Loganathan and R. Narayanasamy		 
 3.Effect of particle size on new constitutive relationship of aluminium–iron powder metallurgy composite during cold upsetting
Materials & Design, Volume 29, Issue 5, 2008, Pages 1011-1026
R. Narayanasamy, T. Ramesh, K.S. Pandey and S.K. Pandey		 
 4.Comparison of barreling in lubricated truncated cone billets during cold upset forging of various metals
Materials & Design, Volume 29, Issue 5, 2008, Pages 1027-1035
A. Syed Abu Thaheer and R. Narayanasamy		 
 5.The effect of strain rate sensitivity on theoretical prediction of limiting draw ratio for cylindrical cup drawing process
Materials & Design, Volume 29, Issue 4, 2008, Pages 884-890
R. Narayanasamy, R. Ponalagusamy and S. Raghuraman		 
 6.Some aspects on cold forging of aluminium–iron powder metallurgy composite under triaxial stress state condition
Materials & Design, Volume 29, Issue 4, 2008, Pages 891-903
R. Narayanasamy, T. Ramesh and K.S. Pandey		 
 7.Effect of geometric work-hardening and matrix work-hardening on workability and densification of aluminium–3.5% alumina composite during cold upsetting
Materials & Design, In Press, Corrected Proof, Available online 8 December 2007
R. Narayanasamy, V. Anandakrishnan and K.S. Pandey		 
 8.An experimental investigation on barreling of aluminium alloy billets during extrusion forging using different lubricants
Materials & Design, In Press, Corrected Proof, Available online 16 May 2007
R. Narayanasamy, K. Baskaran, S. Arunachalam and D. Murali Krishna		 
 9.Effect of titanium carbide particle addition on the densification behavior of sintered P/M high strength steel preforms during cold upset forming
Materials Science and Engineering: A, Volume 456, Issues 1-2, 15 May 2007, Pages 180-188
R. Narayanasamy, V. Senthilkumar and K.S. Pandey		 
 10.Effect of various stress ratio parameters on cold upset forging of irregular shaped billets using graphite as lubricant under plane and triaxial stress state conditions
Materials & Design, In Press, Corrected Proof, Available online 20 March 2007
K. Baskaran and R. Narayanasamy		 
 11.A study on fracture behaviour of three different high strength low alloy steel sheets during formation with different strain ratios
Materials & Design, In Press, Corrected Proof, Available online 16 March 2007
R. Narayanasamy, N.L. Parthasarathi, C. Sathiya Narayanan, T. Venugopal and H.T. Pradhan		 
 12.RETRACTED: Forming limit diagram and crystallographic textures of annealed interstitial free steel sheets
Materials & Design, In Press, Uncorrected Proof, Available online 15 March 2007
R. Narayanasamy, C. Sathiya Narayanan and V. Subramanya Sarma		 
 13.Deformation behaviour of sintered high carbon alloy powder metallurgy steel in powder preform forging
Materials & Design, In Press, Corrected Proof, Available online 1 March 2007
A. Rajeshkannan, K.S. Pandey, S. Shanmugam and R. Narayanasamy		 
 14.Finite difference method for analysis of open-die forging of sintered cylindrical billets
Materials & Design, In Press, Corrected Proof, Available online 27 February 2007
R. Ponalagusamy and R. Narayanasamy		 
 15.Some analysis on stress and strain limit for necking and fracture during forming of some HSLA steel sheets
Materials Science and Engineering: A, Volumes 445-446, 15 February 2007, Pages 427-439
R. Narayanasamy, C. Sathiya Narayanan and N.L. Parthasarathi		 
 16.Some studies on stresses and strains of aluminium alloy during extrusion-forging at room temperature
Materials & Design, In Press, Corrected Proof, Available online 4 February 2007
R. Narayanasamy, K. Baskaran and D. Muralikrishna		 
 17.Effect of annealing on formability of aluminium grade 19000
Materials & Design, In Press, Corrected Proof, Available online 18 January 2007
R. Narayanasamy, M. Ravi chandran and N.L. Parthasarathi		 
 18.Some features on hot forging of powder metallurgy sintered high strength 4%titanium carbide composite steel preforms under different stress state conditions
Materials & Design, In Press, Corrected Proof, Available online 5 January 2007
R. Narayanasamy, V. Senthilkumar and K.S. Pandey		 
 19.Forming limit diagram for interstitial free steels supplied by Ford India Motors
Materials & Design, Volume 28, Issue 1, 2007, Pages 16-35
R. Narayanasamy and C. Sathiya Narayanan		 
 20.Barrelling in truncated lubricated zinc cone billets during cold upset forging
Materials & Design, Volume 28, Issue 2, 2007, Pages 434-440
A. Syed Abu Thaheer and R. Narayanasamy		 
 21.Experimental analysis and evaluation of forming limit diagram for interstitial free steels
Materials & Design, Volume 28, Issue 5, 2007, Pages 1490-1512
R. Narayanasamy and C. Sathiya Narayanan		 
 22.An experimental investigation on strain hardening behaviour of aluminium – 3.5% alumina powder metallurgy composite preform under various stress states during cold upset forming
Materials & Design, Volume 28, Issue 4, 2007, Pages 1211-1223
R. Narayanasamy, T. Ramesh and K.S. Pandey		 
 23.Modelling the effect of particle size and iron content on forming of Al–Fe composite preforms using neural network
Materials & Design, Volume 28, Issue 1, 2007, Pages 119-130
N. Selvakumar, P. Ganesan, P. Radha, R. Narayanasamy and K.S. Pandey		 
 24.Evaluation of limiting strains and strain distribution for interstitial free steel sheets while forming under different strain conditions
Materials & Design, Volume 28, Issue 5, 2007, Pages 1555-1576
R. Narayanasamy and C. Sathiya Narayanan		 
 25.The influence of friction on the prediction of wrinkling of prestrained blanks when drawing through a conical die
Materials & Design, Volume 28, Issue 3, 2007, Pages 904-912
R. Narayanasamy and C. Loganathan		 
 26.Prediction of limit strains in sheet metals by using new generalized yield criteria
Materials & Design, Volume 28, Issue 3, 2007, Pages 913-920
R. Ponalagusamy, R. Narayanasamy and K.R. Subramanian		 
 27.A study on barrelling behaviour of aluminium billets during cold upsetting with an extrusion die constraint at one end
Materials & Design, Volume 28, Issue 3, 2007, Pages 954-961
S. Malayappan, R. Narayanasamy and K. Kalidasamurugavel		 
 28.Effect of friction on barrelling in square and rectangular billets of aluminium during cold upset forging
Materials & Design, Volume 28, Issue 2, 2007, Pages 592-598
K. Manisekar and R. Narayanasamy		 
 29.Wrinkling behaviour of interstitial free steel sheets when drawn through tapered dies
Materials & Design, Volume 28, Issue 1, 2007, Pages 254-259
R. Narayanasamy and C. Sathiya Narayanan		 
 30.Phenomenon of instantaneous strain hardening behaviour of sintered Al–Fe composite preforms during cold axial forming
Materials & Design, Volume 28, Issue 4, 2007, Pages 1358-1363
R. Narayanasamy, N. Selvakumar and K.S. Pandey		 
 31.Barrelling of aluminium solid cylinders during cold upset forging with constraint at both ends
Materials & Design, Volume 28, Issue 4, 2007, Pages 1404-1411
S. Malayappan, R. Narayanasamy and G. Esakkimuthu		 
 32.Some study on wrinkling behaviour of commercially pure aluminium sheet metals of different grades when drawn through conical and tractrix dies
Materials & Design, In Press, Corrected Proof, Available online 27 December 2006
R. Narayanasamy, C. Loganathan and J. Satheesh		 
 33.Forming, fracture and wrinkling limit diagram for if steel sheets of different thickness
Materials & Design, In Press, Corrected Proof, Available online 9 November 2006
R. Narayanasamy and C. Sathiya Narayanan		 
 34.Computer-aided metal flow investigation in streamlined extrusion dies
Materials & Design, In Press, Corrected Proof, Available online 27 September 2006
R. Ponalagusamy, R. Narayanasamy, R. Venkatesan and S. Senthilkumar		 
 35.Study on wrinkling limit of interstitial free steel sheets of different thickness when drawn through Conical and Tractrix dies
Materials & Design, In Press, Corrected Proof, Available online 25 September 2006
R. Narayanasamy and C. Loganathan		 
 36.Some aspects on cold forging of aluminium–alumina powder metallurgy composite under triaxial stress state condition
Materials & Design, In Press, Corrected Proof, Available online 22 September 2006
R. Narayanasamy, T. Ramesh and K.S. Pandey		 
 37.An experimental investigation on work hardening behaviour of elliptical shaped billets of aluminium during cold upsetting
Materials & Design, In Press, Corrected Proof, Available online 22 August 2006
K. Baskaran and R. Narayanasamy		 
 38.Some aspects of workability studies on hot forging of sintered high strength 4% titanium carbide composite steel preforms
Materials Science and Engineering: A, Volume 425, Issues 1-2, 15 June 2006, Pages 121-130
R. Narayanasamy, V. Senthilkumar and K.S. Pandey		 
 39.Some aspects on hot forging features of P/M sintered iron preforms under various stress state conditions
Mechanics of Materials, Volume 38, Issue 4, April 2006, Pages 367-386
R. Narayanasamy, V. Senthilkumar and K.S. Pandey		 
 40.Study on wrinkling limit of commercially pure aluminium sheet metals of different grades when drawn through conical and tractrix dies
Materials Science and Engineering: A, Volume 419, Issues 1-2, 15 March 2006, Pages 249-261
R. Narayanasamy and C. Loganathan		 
 41.Wrinkling of commercially pure aluminium sheet metals of different grades when drawn through conical and tractrix dies
Materials Science and Engineering: A, Volume 419, Issues 1-2, 15 March 2006, Pages 331-343
C. Loganathan and R. Narayanasamy		 
 42.Some aspects on fracture limit diagram developed for different steel sheets
Materials Science and Engineering: A, Volume 417, Issues 1-2, 15 February 2006, Pages 197-224
R. Narayanasamy and C. Sathiya Narayanan		 
 43.Some aspects on strain hardening behaviour in three dimensions of aluminium–iron powder metallurgy composite during cold upsetting
Materials & Design, Volume 27, Issue 8, 2006, Pages 640-650
R. Narayanasamy, T. Ramesh and K.S. Pandey		 
 44.Workability studies on cold upsetting of Al–Al2O3 composite material
Materials & Design, Volume 27, Issue 7, 2006, Pages 566-575
R. Narayanasamy, T. Ramesh and K.S. Pandey		 
 45.Effect of friction on barrelling in square billets of aluminium during cold upset forging
Materials & Design, Volume 27, Issue 2, 2006, Pages 147-155
K. Manisekar, R. Narayanasamy and S. Malayappan		 
 46.An upper bound solution to extrusion of circular billet to circular shape through cosine dies
Materials & Design, Volume 27, Issue 5, 2006, Pages 411-415
R. Narayanasamy, R. Ponalagusamy, R. Venkatesan and P. Srinivasan		 
 47.Forming limit diagram for Indian interstitial free steels
Materials & Design, Volume 27, Issue 10, 2006, Pages 882-899
R. Narayanasamy and C. Sathiya Narayanan		 
 48.Effect of annealing on the wrinkling behaviour of the commercial pure aluminium grades when drawn through a conical die
Materials & Design, Volume 27, Issue 10, 2006, Pages 1163-1168
C. Loganathan, R. Narayanasamy and S. Sathiyanarayanan		 
 49.Effect of mechanical properties on the wrinkling behaviour of three different commercially pure aluminium grades when drawn through conical and tractrix dies
Materials Science and Engineering: A, Volume 406, Issues 1-2, 15 October 2005, Pages 229-253
C. Loganathan and R. Narayanasamy		 
 50.

Academics

Admissions

Student life

Other Links

Contact Us
  • National Institute of Technology
    Tiruchirappalli - 620015
    Tamil Nadu, INDIA
    Fax: +91-431-2500133