Journals
Refereed Research Journals
| Author(s) | Title of Paper | Journal | Volume (No.) | Page numbers | Year | Impact Factor of the Journal (Optional) |
|---|---|---|---|---|---|---|
| Vellaisamy Balasubramaniam, Durairaj Rajkumar, Poovaraj Ranjithkumar, Chinnaiyan Sathiya Narayanan | Comparative study of mechanical technologies over laser technology for drilling carbon fiber reinforced polymer materials | Indian Journal of Engineering and Materials Sciences (IJEMS) | 27(1) | 19-32 | 2021 | |
| Ramkumar, K., N. Baskar, K. Elangovan, C. Sathiya Narayanan, K. A. Selvarajan, and C. P. Jesuthanam | Comparison of multi point incremental forming tool with single point incremental forming tool using FLD, fractography and 3D-surface roughness analysis on Cr/Mn/Ni/Si based stainless steel | Silicon | 13(2) | 487-494 | 2021 | |
| G Yoganjaneyulu, C Sathiya Narayanan | Application of Entropy—Deng’s Similarity Approach for Optimization of Single-Point Incremental Forming Process Parameters of Titanium Grade 2 Sheets | Advances in Industrial Automation and Smart Manufacturing-Springer, Singapore | 297-312 | 2021 | ||
| PN Siddharth, C Sathiya Narayanan | A review on Electron Beam Welding process | Journal of Physics: Conference Series | 1706(1) | 12208 | 2020 | |
| G Yoganjaneyulu, Natarajan Manikandan, C Sathiya Narayanan | Investigations on multi-sheets single point incremental forming of commercial pure titanium alloys | Materials and Manufacturing Processes | 35(9) | 1002-1009 | 2020 | |
| K Ramkumar, N Baskar, K Elangovan, C Sathiya Narayanan, KA Selvarajan, CP Jesuthanam | Comparison of Multi Point Incremental Forming Tool with Single Point Incremental Forming Tool Using FLD, Fractography and 3D-Surface Roughness Analysis on Cr/Mn/Ni/Si Based Stainless Steel | Silicon | 1-8 | 2020 | ||
| C Chinthanai Selvan, C Sathiya Narayanan, B Ravisankar, R Narayanasamy, C Thillaiyadi Valliammai | The dependence of the strain path on the microstructure, texture and mechanical properties of cryogenic rolled Al-Cu alloy | Materials Research Express | 7(3) | 36525 | 2020 | |
| K Tejonadha Babu, S Muthukumaran, C Sathiya Narayanan, CH Bharat Kumar | Analysis And Characterization Of Forming Behavior On Dissimilar Joints Of Aa5052-O To Aa6061-T6 Using Underwater Friction Stir Welding | Surface Review and Letters | 27(3) | 1950121 | 2020 | |
| G Yoganjaneyulu, VV Ravikumar, C Sathiya Narayanan | Investigations on strain distribution, stress-based fracture limit and corrosion behaviour of titanium Grade 2 sheets during single point incremental forming | Anti-Corrosion Methods and Materials | 2020 | |||
| G Vignesh, C Pandivelan, CS Narayanan | Review on multi-stage incremental forming process to form vertical walled cup | Materials Today: Proceedings | 27 | 2297-2302 | 2020 | |
| G Vignesh, C Pandivelan, CS Narayanan | Study on formability and dislocation density in forming of hemispherical cup | Materials Today: Proceedings | 27 | 2005-2010 | 2020 | |
| G Vignesh, CS Narayanan, C Pandivelan, K Shanmugapriya, BN Tejavath, L Tirupathi | Forming, fracture and corrosion behaviour of stainless steel 202 sheet formed by single point incremental forming process | Materials Research Express | 6 (12) | 126540 | 2019 | |
| G Yoganjaneyulu, KA Babu, S Vigneshwaran, CS Narayanan | Microstructure and mechanical properties of cryorolled Al–6Zn–3Mg–2Cu–0.5 Sc alloy | Materials Letters | 255 | 126606 | 2019 | |
| G Yoganjaneyulu, CS Narayanan | A Comparison of Fracture Limit Analysis on Titanium Grade 2 and Titanium Grade 4 Sheets During Single Point Incremental Forming | Journal of Failure Analysis and Prevention | 19 (5) | 1286-1296 | 2019 | |
| S Kumar, S Dhanabalan, CS Narayanan | Application of ANFIS for the Selection of Optimal Wire-EDM Parameters While Machining Ti-6Al-4V Alloy and Multi-Parametric Optimization Using GRA Method | International Journal of Decision Support System Technology (IJDSST) | 11 (4) | 96-115 | 2019 | |
| CC Selvan, CS Narayanan, S Vigneshwaran, R Narayanasamy, P Susila | The microstructure transformations and deformation behavior of Al-4Mg-0.2 Zr alloy rolled at ambient and cryogenic temperatures | Materials Research Express | 6 (10) | 1065a5 | 2019 | |
| G Yoganjaneyulu, VV Ravikumar, CS Narayanan | Investigations on strain distribution, stress-based fracture limit and corrosion behaviour of titanium Grade 2 sheets during single point incremental forming | Anti-Corrosion Methods and Materials | 2019 | |||
| G Yoganjaneyulu, Y Phaneendra, VV Ravikumar, CS Narayanan | Investigations on the void coalescence and corrosion behaviour of titanium grade 4 sheets during single point incremental forming process | Anti-Corrosion Methods and Materials | 2019 | |||
| G Yoganjaneyulu, KA Babu, GV Siva, S Vigneshwaran, CS Narayanan | Microstructure and mechanical properties of Al–6 Zn–3 Mg–2 Cu–0.5 Sc alloy | Materials Letters | 2019 | |||
| S Kumar, S Dhanabalan, CS Narayanan | Application of ANFIS and GRA for multi-objective optimization of optimal wire-EDM parameters while machining Ti–6Al–4V alloy | SN Applied Sciences | 1 (4) | 298 | 2019 | |
| S Dhanabalan, K Sivakumar, CS Narayanan | Form tolerances investigation in EDM process for super alloys using multiple holes electrodes | NISCAIR-CSIR | 2019 | |||
| KT Babu, S Muthukumaran, CH Kumar, CS Narayanan | Improvement in Mechanical and Metallurgical Properties of Friction Stir Welded 6061-T6 Aluminum Alloys through Cryogenic Treatment | In Materials Science Forum | 969 | 490-495 | 2019 | |
| KT Babu, S Muthukumaran, CH Kumar, CS Narayanan | A Study on Influence of Underwater Friction Stir Welding on Microstructural, Mechanical Properties and Formability in 5052-O Aluminium Alloys | In Materials Science Forum | 969 | 27-33 | 2019 | |
| G Yoganjaneyulu, C Sathiya Narayanan, R Narayanasamy | Investigation on the fracture behavior of titanium grade 2 sheets by using the single point incremental forming process | Journal of Manufacturing Processes | 35 | 197-204 | 2018 | |
| K Ramkumar, G Paulraj, K Elangovan, C Sathiya Narayanan | Forming Limit Diagram, Void Analysis, Strain Distribution and Surface Roughness for SS430 Sheets During Multipoint Incremental Forming | Archives of Metallurgy and Materials | 63 | 1709-1714 | 2018 | |
| C Raju, Neelkamal Haloi, C Sathiya Narayanan | Strain distribution and failure mode in single point incremental forming (SPIF) of multiple commercially pure aluminum sheets | Journal of Manufacturing Processes | 30 | 328-335 | 2017 | |
| D Rajkumar, P Ranjithkumar, C Sathiya Narayanan | Optimization of machining parameters on microdrilling of CFRP composites by Taguchi based desirability function analysis | NISCAIR-CSIR, India | 2017 | |||
| S Kannadasan, A Senthil Kumar, C Pandivelan, C Sathiya Narayanan | Modelling the Forming Limit Diagram for Aluminium Alloy Sheets using ANN and ANFIS | Appl. Math | 11 | 1435-1442 | 2017 | |
| D Raj Kumar, P Ranjith Kumar, C Sathiya Narayanan, G Sakthivel, S Karmegam | Application of the Taguchi based Desirability Function Analysis to Improve a GFRP Micro-drilling Performance | Asian Journal of Research in Social Sciences and Humanities | 7 | 771-783 | 2017 | |
| L Selvarajan, C Sathiya Narayanan, R Jeyapaul, M Manohar | Optimization of EDM process parameters in machining Si3N4–TiN conductive ceramic composites to improve form and orientation tolerances | Measurement | 92 | 114-129 | 2016 | |
| C Raju, C Sathiya Narayanan | FLD and Fractography Analysis of Multiple Sheet Single Point Incremental Forming | Transactions of the Indian Institute of Metals | 69 | 1237-1243 | 2016 | |
| L Selvarajan, C Sathiya Narayanan, R JeyaPaul | Optimization of EDM Parameters on Machining Si3N4–TiN Composite for Improving Circularity, Cylindricity, and Perpendicularity | Materials and Manufacturing Processes | 31 | 405-412 | 2016 | |
| V Balasubramaniam, N Baskar, Chinnaiyan Sathiya Narayanan | Effect of process parameters on the electrical discharge machining of aluminum metal matrix composites through a response surface methodology approach | Science and Engineering of Composite Materials | 23 | 145-154 | 2016 | |
| V Balasubramaniam, N Baskar, C Sathiya Narayanan | Experimental Investigations on EDM Process for Optimum Cylindricity and SR through less Machining Time for Al6061/SiC Composites | Asian Journal of Research in Social Sciences and Humanities | 6 | 126-134 | 2016 | |
| C Raju, C Sathiya Narayanan | Application of a hybrid optimization technique in a multiple sheet single point incremental forming process | Measurement | 78 | 296-308 | 2016 | |
| L Selvarajan, C Sathiya Narayanan, R Jeyapaul | Optimization of EDM Hole Drilling Parameters in Machining of MoSi 2-SiC Intermetallic/Composites for Improving Geometrical Tolerances | Journal of Advanced Manufacturing Systems | 14 | 259-272 | 2015 | |
| L Selvarajan, C Sathiya Narayanan, R Jeyapaul | Optimization of process parameters to improve form and orientation tolerances in EDM of MoSi2-SiC composites | Materials and Manufacturing Processes | 30 | 954-960 | 2015 | |
| S Dhanabalan, K Sivakumar, C SATHIYA Narayanan | Experimental investigation on electrical discharge machining of titanium alloy using copper, brass and aluminum electrodes | Journal of Engineering Science and Technology | 10 | 72-80 | 2015 | |
| S Dhanabalan, K Sivakumar, C Sathiya Narayanan | Analysis of form tolerances in electrical discharge machining process for Inconel 718 and 625 | Materials and Manufacturing Processes | 29 | 253-259 | 2014 | |
| V Balasubramaniam, N Baskar, C Sathiya Narayanan | Optimization of Electrical Discharge Machining Parameters Using Artificial Neural Network With Different Electrodes | 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12th–14th | 2014 | |||
| A Palanisamy, R Rekha, S Sivasankaran, C Sathiya Narayanan | Multi-Objective Optimization of EDM Parameters Using Grey Relational Analysis for Titanium Alloy (Ti–6Al–4V) | Applied Mechanics and Materials | 592 | 540-544 | 2014 | |
| L Selvarajan, C Sathiya Narayanan, R Jeyapaul | Multi-Objective Optimization on Electric Discharge Machining Using by Grey Relational Analysis | Applied Mechanics and Materials | 592 | 550-554 | 2014 | |
| L Selvarajan, C Sathiya Narayanan, R Jeyapaul | Optimization of Machining Characteristics in EDM of Si3N4-TiN Composites by Taguchi Grey Relational Analysis | Applied Mechanics and Materials | 592 | 600-604 | 2014 | |
| S Dhanabalan, K Sivakumar, C Sathiya Narayanan | Optimization of machining parameters of EDM while machining Inconel 718 for form tolerance and orientation tolerance | NISCAIR-CSIR, India | 2013 | |||
| S Dhanabalan, K Sivakumar, C Sathiya Narayanan | Optimization of Machining Parameters in EDM of Inconel 718 for Form Tolerance Using Grey Relational Analysis | Corrosion Detection in ‘T’Bend Oil Pipelines Based on Fuzzy Implementation | 17 | 1453 | 2012 | |
| G Venkatachalam, S Narayanan, C Sathiya Narayanan | Ductile Fracture Criteria Based Forming Limits of Pure Commercial Perforated Aluminium Sheets in the Negative Minor Strain Region | European Journal of Scientific Research | 77 | 411-416 | 2012 | |
| G Venkatachalam, S Narayanan, S Patel Nilay, Prabhakar Nishant, C Sathiya Narayanan | Influence of hole shape and pattern on the prediction of limiting strain for perforated commercial pure aluminium sheets | Applied Mechanics and Materials | 232 | 961-965 | 2012 | |
| G Venkatachalam, S Narayanan, C SATHIYA NARAYANAN | Influence of hole size, hole shape and hole pattern on spring-back effect in perforated sheet metals using FEM | International Journal of Engineering Science and Technology (IJEST) | 2012 | |||
| S Dhanabalan, K Sivakumar, C Sathiya Narayanan | Optimization of EDM process parameters with multiple performance characteristics for titanium grades | European journal of scientific research | 68 | 297-305 | 2012 | |
| G Venkatachalam, S Narayanan, Narayanan C Sathiya | Prediction of limiting strains for square pattern–square hole perforated commercial pure aluminium sheets | Advanced Materials Research | 548 | 382-386 | 2012 | |
| S Murugesan, K Balamurugan, C Sathiya Narayanan, PG Venkatakrishnan | Study on EDM of Al-15% SiC MMC using Solid and Multihole electrodes-A Taguchi approach | European Journal of Scientific Research | 68 | 161-171 | 2012 | |
| K Elangovan, C Sathiya Narayanan, R Narayanasamy | Modelling the correlation between the geometrical features and the forming limit strains of perforated Al 8011 sheets using artificial neural network | International journal of material forming | 4 | 389-399 | 2011 | |
| G Venkatachalam, S Narayanan, C Sathiya Narayanan, R Abhishek | Analysis of perforated sheet metals with square and hexagonal holes using finite element method | Journal of Manufacturing Engineering | 6 | 1-4 | 2011 | |
| R Narayanasamy, C Sathiya Narayanan, Palani Padmanabhan, T Venugopalan | Effect of mechanical and fractographic properties on hole expandability of various automobile steels during hole expansion test | The International Journal of Advanced Manufacturing Technology | 47 | 1-4 | 2010 | |
| K Elangovan, C Sathiya Narayanan, R Narayanasamy | Modelling of forming limit diagram of perforated commercial pure aluminium sheets using artificial neural network | Computational Materials Science | 47 | 1072-1078 | 2010 | |
| K Elangovan, C Narayanan | Application of Taguchi approach on investigation of formability for perforated Al 8011 sheets | International Journal of Engineering, Science and Technology | 2 | 300-309 | 2010 | |
| R Narayanasamy, M Ravi Chandran, C Vanitha, C Sathiya Narayanan | Effect of annealing on forming limit diagram and crystallographic textures of aluminium 5086 grades annealed at four different temperatures | Materials Science and Technology | 25 | 1193-1206 | 2009 | |
| R Narayanasamy, NL Parthasarathi, C Sathiya Narayanan | Effect of microstructure on void nucleation and coalescence during forming of three different HSLA steel sheets under different stress conditions | Materials & Design | 30 | 1310-1324 | 2009 | |
| R Narayanasamy, NL Parthasarathi, C Sathiya Narayanan, T Venugopal, HT Pradhan | A study on fracture behaviour of three different high strength low alloy steel sheets during formation with different strain ratios | Materials & Design | 29 | 1868-1885 | 2008 | |
| R Narayanasamy, NL Parthasarathi, R Ravindran, C Sathiya Narayanan | Strain limit of extra galvannealed interstitial-free and bake hardened steel sheets under different stress conditions | Journal of Iron and Steel Research, International | 15 | 56-60 | 2008 | |
| R Narayanasamy, NL Parthasarathi, R Ravindran, C Sathiya Narayanan | Analysis of fracture limit curves and void coalescence in high strength interstitial free steel sheets formed under different stress conditions | Journal of materials science | 43 | 3351-3363 | 2008 | |
| R Narayanasamy, J Satheeesh, CS Narayanan | Experimental evaluation of wrinkling limit diagrams for aluminium alloy 5052 sheets annealed at different temperatures | The Journal of Strain Analysis for Engineering Design | 43 | 149-163 | 2008 | |
| R Narayanasamy, J Satheesh, C Sathiya Narayanan | Effect of annealing on combined forming, fracture and wrinkling limit diagram of Aluminium 5086 alloy sheets | International Journal of Mechanics and Materials in Design | 4 | 31 | 2008 | |
| R Narayanasamy, C Sathiya Narayanan | Forming, fracture and wrinkling limit diagram for if steel sheets of different thickness | Materials & Design | 29 | 1467-1475 | 2008 | |
| R Narayanasamy, C Sathiya Narayanan, NL Parthasarathi | Some analysis on stress and strain limit for necking and fracture during forming of some HSLA steel sheets | Materials Science and Engineering: A | 445 | 427-439 | 2007 | |
| R Narayanasamy, C Sathiya Narayanan | Evaluation of limiting strains and strain distribution for interstitial free steel sheets while forming under different strain conditions | Materials & design | 28 | 1555-1576 | 2007 | |
| R Narayanasamy, C Sathiya Narayanan | Forming limit diagram for interstitial free steels supplied by Ford India Motors | Materials & design | 28 | 16-35 | 2007 | |
| R Narayanasamy, C Sathiya Narayanan | Wrinkling behaviour of interstitial free steel sheets when drawn through tapered dies | Materials & design | 28 | 254-259 | 2007 | |
| R Narayanasamy, C Sathiya Narayanan | Experimental analysis and evaluation of forming limit diagram for interstitial free steels | Materials & design | 28 | 1490-1512 | 2007 | |
| R Narayanasamy, C Sathiya Narayanan, NL Parthasarathi, R Ravindran | Effect of annealing temperature on void coalescence in 5086 aluminium alloy formed under different stress conditions | International Journal of Mechanics and Materials in Design | 3 | 293-307 | 2006 | |
| R Narayanasamy, C Sathiya Narayanan | Some aspects on fracture limit diagram developed for different steel sheets | Materials Science and Engineering: A | 417 | 197-224 | 2006 | |
| R Narayanasamy, C Sathiya Narayanan | Forming limit diagram for Indian interstitial free steels | Materials & design | 27 | 882-899 | 2006 | |
| R Narayanasamy, C Sathiya Narayanan | Forming limit diagram for interstitial free steels Part I | Materials Science and Engineering: A | 399 | 292-307 | 2005 | |
| R Narayanasamy, C Sathiya Narayanan | FORMABILITY OF HSLA AND EDDQ STEELS | Innovating the Future Through Manufacturing | 296 | 2005 | ||
| R Narayanasamy, C Sathiya Narayanan | Formability of HSLA and EDDQ steels of tube products of India | CSIR | 2005 |
Conferences/Workshops/Symposia Proceedings
| Author(s) | Title of Abstract/ Paper | Title of the Proceedings | Page numbers | Conference Theme | Venue | Year |
|---|---|---|---|---|---|---|
| K A Selvarajan, C Sathiya Narayanan, C Raju | Co efficient of Performance between Single and Multi Point Incremental Forming Tools ( Patent Protected) for Similar Components | AMPIE’18 | International Conference | MIET Namakkal | 2018 | |
| K A Selvarajan, C Sathiya Narayanan, C Raju | Development of Multi Point Incremental Forming Tools (Patent Protected) – An overview from starting stage prototypes | AMPIE’18 | International Conference | MIET Namakkal | 2018 | |
| K A Selvarajan, C Sathiya Narayanan, C Raju | Development of Database for Literature Review on Multi Point Incremental Forming Tools (Patent Protected) | AMPIE’18 | International Conference | MIET Namakkal | 2018 | |
| K A Selvarajan, C Sathiya Narayanan | Multiple Sheet Single Point Incremental Forming for dual phase steel sheet | CDAMIES-2018 | International Conference | NIT Trichy | 2018 | |
| D Rajkumar, P Ranjithkumar, C Sathiya Narayanan | Optimization and application of VMC in small-hole fabrication of CFRP composites | International Conference on Recent Advances in Engineering & Technology (ICRAET-2017) | Others | MAM School of Engineering, Trichy | 2017 | |
| D Rajkumar, P Ranjithkumar, C Sathiya Narayanan | Effect of machining parameters on hole quality of micro drilling for CFRP | International Conference on materials, design and manufacturing process (ICMDM 2016) | International Conference | CEG Chennai | 2016 | |
| D Rajkumar, P Ranjithkumar, C Sathiya Narayanan | Optimization of machining parameter on drilling of CFRP composite desirability function analysis by Taguchi method | Second national level conference on Materials and Metallurgical Application (NCMMA-16) | International Conference | Nadar Saraswathi College of Engineering | 2016 | |
| D Rajkumar, P Ranjithkumar, C Sathiya Narayanan | Optimization Model in Computer Numerical Control Micro Step turning Process | Proceedings of the International Colloquium on Materials, Manufacturing and Metrology | International Conference | IT madras | 2014 | |
| V Balasubramaniam, N Baskar, C Sathiya Narayanan | Optimisation of Electrical discharge machining parameters using artificial neural network with different electrodes | 5th Int and 26 All India AIMTDR | International Conference | 2014 | ||
| D Rajkumar, P Ranjithkumar, C Sathiya Narayanan | Micromachining of Surface Roughness using Computer Numerical Control Lathe | An International Conference on PRECISION, MESO, MICRO AND NANO ENGINEERING-COPEN 2013 | International Conference | NIT, Calicut | 2013 | |
| V Balasubramaniam, N Baskar, C Sathiya Narayanan | Grey relational analysis approach for machining parameters optimisation in EDM process | INCAMA 2013 | International Conference | kalasalingam university | 2013 | |
| V Balasubramaniam, N Baskar, C Sathiya Narayanan | Optimization of EDM parameters for Titanium alloy using L27 orthogonal array with Taghuchi Technique | AIMTDR 2012, 25th International conference and 4th AIMTDR | International Conference | Jadavpur University, Kolkata | 2012 | |
| V Balasubramaniam, N Baskar, C Sathiya Narayanan | Mathematical Modeling and Analysis of Electrical Discharge Machining on Al MMC-5 vol % SiCp composites | AIMTDR 2012, 25th international conference and 4th AIMTDR | International Conference | Jadavpur University, Kolkata | 2012 | |
| V Balasubramaniam, N Baskar, C Sathiya Narayanan | Investigation of Micromachining on CNC International Conference | INCOSET- 2012 | International Conference | JJ College of Engineering and Technology, Tamilnadu | 2012 | |
| S Dhanabalan, K Sivakumar, C Sathiya Narayanan | Optimization of EDM Process Parameters for Al 6061-3%TIC Composite Using Grey Relational analysis | AIMTDR-2010 | International Conference | Andhra University, Visakhapatnam.A.P | 2010 | |
| S Dhanabalan, K Sivakumar, C Sathiya Narayanan | Optimization of EDM Parameters for Inconel 718 Using L18 Array with Grey Relational Analysis | AIMTDR 10 | International Conference | Andra University College of Engineering, Vishakapa | 2010 | |
| S Dhanabalan, K Sivakumar, C Sathiya Narayanan | Investigation of surface quality, MRR, EWR for composite materials in EDM process | ETAM-2010, National conference on Emerging Technologies in Advanced Manufacturing | Others | K. LN college of Engineering, Pottapalayam | 2010 | |
| S Dhanabalan, K Sivakumar, C Sathiya Narayanan | The Use of Orthogonal Array With Taguchi Technique To Optimize The Electrical Discharge Machining Process With Multiple Performance Characteristics For Titanium Grades | ICAIEA 2010 | International Conference | Anna university Gundy. Chennal | 2010 | |
| S Dhanabalan, K Sivakumar, C Sathiya Narayanan | Multiple Performance Characteristic Optimizations of Robust Technique For Titanium Alloy | COSMA '09 | International Conference | NIT, CALICUT | 2009 | |
| S Dhanabalan, K Sivakumar, M Ganesan, C Sathiya Narayanan | Optimal Machining Parameters In Electrical Discharge Machine Conventional Optimization Technique | TEAM-TECH 2009 | International Conference | BANGLORE | 2009 | |
| S Dhanabalan, K Sivakumar, M Ganesan, C Sathiya Narayanan | Multi - Objective Optimization of EDM Parameters Using Intelligent Technique For Titanium Alloy | TEAM-TECH 2009 | International Conference | BANGLORE | 2009 | |
| S Dhanabalan, K Sivakumar, C Sathiya Narayanan | Multiple Performance Characteristic Optimization Of EDM Parameters Using Orthogonal Array And Neural Network For Titanium Alloy | TEAM -TECH 2009 | International Conference | BANGLORE | 2009 | |
| S Dhanabalan, K Sivakumar, C Sathiya Narayanan | Multi-Objective Optimization of EDM Parameters Using Grey Relational Analysis For Titanium Alloy | INDIA-JAPAN CONFRENCE on Advances in Material Processing | International Conference | Annamalai University | 2009 | |
| R Narayanasamy, N L Parthasarathi, R Ravindran, C Sathiya Narayanan | Some Aspects of Formability Studies on Automotive High Strength Interstitial Free (IF) Steels at room temperature | NCAM -2007 | International Conference | PSG College of Technology, Coimabatore | 2007 | |
| R Narayanasamy, R Ravindran, N L Parthasarathi, C Sathiya Narayanan | Void Analysis of Aluminium Alloy 5086 Formed under Different Stress Conditions At Different Annealing Temperature | RTME – 2007 | Others | Saranathan College of Engineering, Trichy | 2007 | |
| R Narayanasamy, N L Parthasarathi, R Ravindran, C Sathiya Narayanan | A Comparative study on Strain Limit of Extra Galvannealed interstitial Free and Bake Hardened Steel Sheets under Different Stress Conditions | RTME-2007 | Others | Saranathan College of Engineering, Trichy | 2007 | |
| S Dhanabalan, K Sivakumar, C Sathiya Narayanan | Application of Taguchi Method in the optimization of EDM parameters for surface roughness In Titanium | National Conference on Emerging Trends in Mechanical Engineering and Sciences - ETIMES 2007 | International Conference | Bannari Amman Institute of Technology, Sathyamanga | 2007 | |
| C Sathiya Narayanan, R Narayanasamy | Forming Limit Diagram for Interstitial Free Steels | International Conference on Recent Advances in Materials Processing Technology | International Conference | National Engineering College, Kovilpatti, Tamilnadu | 2005 | |
| R Narayanasamy, C Sathiya Narayanan | Formability of HSLA and EDDO steels | AIMTDR Conference | International Conference | VIT Vellore | 2004 | |
| C Sathiya Narayanan, R Narayanasamy | Farming Limit Diagram for Stainless Steel Sheet 430 Grade | National Conference on Recent Advances in Mechanical Engineering | Others | National Engineering College, Kovilpatti, Tamilnadu | 2004 |