Publications

Papers published in Journals (International/National)

International Journals:

2022

  1. “Subtle change in the work hardening behavior of fcc materials processed by selective laser melting”, R Sokkalingam, K Sivaprasad, N Singh, V Muthupandi, P Ma, YD Jia, KG Prashanth, Progress in Additive Manufacturing, Progress in Additive Manufacturing, (2022) volume 7, pp 453–461
  2. “Additive manufacturing of CoCrFeMnNi high entropy alloy/AISI 316L stainless steel bimetallic structures”, R. Sokkalingam, M. Zhao, Sivaprasad, V. Muthupandi, J. Jayaraj, R. Parthiban, J. Eckert, C. Zhao, Advanced Engineering Materials, Accepted for publication, 2022.
  3. “Dynamic compression behavior of Ti/TiAl3/Al metal intermetallic laminates”, N. Thiyaneshwaran, Sivaprasad, B. Ravisankar, Journal of Materials Engineering and Performance, Accepted for publication
  4. “Evolution of Microstructure and Mechanical Properties of LM25-HEA Composite Processed Through Stir Casting with Bottom Pouring System”, Mekala Chinababu, N Naga Krishna, Katakam Sivaprasad, Konda Gokuldoss Prashanth, E. Bhaskara Rao, Materials, 2022, 15(1), 230-232 (https://doi.org/10.3390/ma15010230)

2021

  1. “Influence of Nickel-based Buttering Material on Welded Joint between SA508 Low Alloy Steel and 304LN Stainless Steel”, K Ravikiran; H Mehtani; K Sivaprasad; MJNV Prasad; Suranjit Kumar; P K Singh, M.Ghosh, International Journal of Pressure Vessels and Piping, 2021, Accepted for publication.
  2. “Dissimilar welding of high-entropy alloy to Inconel 718 superalloy for structural applications”, R. Sokkalingama, B. Pravallika, Sivaprasad, V. Muthupandi, K. G. Prashanth, Journal of Materials Research, 2021, Accepted. (selected under JMR’s Early 2022 Career Scholars issue). DOI:10.1557/s43578-021-00352-w
  3. “Tribological Behavior of Laser Surface Melted γ-TiAl Fabricated by Electron Beam Additive Manufacturing”, G.V. Krishna Pradeep, Muthukannan Duraiselvam, and Sivaprasad, Journal of Materials Engineering and Performance, 2021, Accepted for publication. https://doi.org/10.1007/s11665-021-06278-y
  4. “ Comparison based on specific strength and density of in-situ Ti/Al and Ti/Ni metal intermetallic laminates” Nagarajan Thiyaneshwaran, Chithirai Pon Selvan, Avinash Lakshmikanthan, Katakam Sivaprasad, Balasubramanian Ravisankar, Journal of Materials Research and Technology, 14, 2021, 1126-1136. https://doi.org/10.1016/j.jmrt.2021.06.102,
  5. “Characterization based analysis on TiAl3 intermetallic phase layer growth phenomenon and kinetics in diffusion bonded Ti/TiAl3/Al laminates”, N.Thiyaneshwaran, Sivaprasad, B.Ravisankar, Materials Characterization, 174, 2021, 110981 (https://doi.org/10.1016/j.matchar.2021.110981)
  6. “ Deformation behavior of Al/Cu in-situ metal-intermetallic laminates at low and high strain rates” Kartheek SM Sonti, Biswaranjan Dash, KV Vamsi, H Bandyopadhyay, B Ravisankar, K Sivaprasad, S Karthikeyan, Journal of Alloys and Compounds, 2021, 873, 159767. https://doi.org/10.1016/j.jallcom.2021.159767
  7. “ Microstructure and properties of inā€situ high entropy alloy/tungsten carbide composites by mechanical alloying”, Rathinavelu Sokkalingam, Marek Tarraste, Kumar Babu Surreddi, Rainer Traksmaa, Veerappan Muthupandi, Katakam Sivaprasad, Konda Gokuldoss Prashanth, Material Design & Processing Communications, 2021, 3 (5), e175. https://doi.org/10.1002/mdp2.175

2020

  1. “Powder metallurgy of Al0.1CoCrFeNi high-entropy alloy”, R. Sokkalingam; Tarraste, Marek; Surreddi, Kumar Babu; Mikli, Valdek; V. Muthupandi; Sivaprasad; Prashanth, Konda Gokuldoss, Journal of Materials Research, 35 (21), November 2020, 2835-2847 – INVITED FEATURE ARTICLE
  2. “ Achieving superior strength and ductility combination through cryorolling in 2219 aluminum alloy” B. Blessto, Sivaprasad, V. Muthupandi, M. Arumugam, Journal of Materials Engineering and Performance, 29(10), October 2020, 6809–6817.
  3. “ Effect of crack path and high angle grain boundaries on fracture toughness and fatigue behavior of cryorolled AA2219”, B.Blessto, Sivaprasad, V. Muthupandi, M. Arumugam, Fatigue & Fracture of Engineering Materials & Structures, 43 (11), November 2020, 2608-2622. (https://doi.org/10.1111/ffe.13320)
  4. “ Excellent Combination of Tensile ductility and strength due to nanotwinning and a bi-modal structure in cryorolled austenitic stainless steel” G. Venkata Sarath Kumar, K. R. Mangipudi, G. V. S. Sastry, Lalit Kumar Singh, S. Dhanasekaran & Sivaprasad, Scientific Reports (Nature Publishing Group), 10, 2020, 354. https://doi.org/10.1038/s41598-019-57208-x.
  5. “Novel welding of Al0.5CoCrFeNi high-entropy alloy: Corrosion behavior”, R. Sokkalingam, Sivaprasad, M. Duraiselvam, V. Muthupandi, K.G. Prashanth, Journal of Alloys and Compounds, 2020, 857, 153163. (SCI) ISSN: 0925-8388. (https://doi.org/10.1016/j.jallcom.2019.153163)
  6. “ Microstructural, Mechanical and Tribological Behavior of Gravity-and Squeeze-Cast Novel Al– Si– Cu– Mg– Fe Alloy” V. Srinivasa Chandra, B Blessto, S Divya, S Dhanasekaran, M Ravi, K Sivaprasad, Transactions of the Indian Institute of Metals, 2020, 73(6), 1409–1415.
  7. “Replication of the Al/Ti Metal Intermetallic Laminates Using LS Dyna for Tungsten Alloy Penetrator Application”, B Blessto, S Nair, K Sivaprasad, D Nagarajan, Journal of The Institution of Engineers (India): Series D, 2020, 1-7 (https://doi.org/10.1007/s40033-020-00208-3)
  8. “ Electron Beam Welding of High Entropy Alloy and Stainless Steel: Microstructure and Mechanical Properties” R. Sokkalingam, P. Mastanaiah, V. Muthupandi, K. Sivaprasad, K.G. Prashanth, Materials, and Manufacturing Processes, 2020, 35(16), 1885-1894.
  9. “Effect of Fe Addition to Binder Phase on Mechanical Properties of Tungsten Heavy Alloy”, P. V. Satyanarayana, B. Blessto, R. Sokkalingam, C. Rambabu, K. Sivaprasad, Transactions of the Indian Institute of Metals, 73 (4), 2020, 863-871, (SCIE) ISSN: 0972-2815 (DOI 10.1007/s12666-019-01833-7)

2019

1. “Microstructure and mechanical properties of Al - 3Mg - 0.25 Sc alloy sheets produced by Cryorolling”, S. Vigneshwaran, K. Sivaprasad, R. Narayanasamy K. Venkateswarlu, Materials Science and Engineering A, 740-741, 2019, 49-62. (https://doi.org/10.1016/j.msea.2018.10.044) ISSN: 0921-5093(SCI)

2018

2. “Nucleation and growth of TiAl3 intermetallic phase in diffusion bonded Ti/Al Metal Intermetallic Laminate”, N. Thiyaneshwaran, K.Sivaprasad, B.Ravisankar, Scientific Reports (Nature Publishing Group) 8, Article Number: 16797 (2018), (DOI:10.1038/s41598-018-35247-0) ISSN 2045-2322 (online).

3. “Mechanical and TribologicalBehavior of Multiwalled Carbon nanotubes Reinforced AA7075 Composites Prepared by Powder metallurgy and Hot Extrusion”, M. Jagannatham, M.S. SenthilSaravanan, K. Sivaprasad, S.P. KumareshBabu, Journal of Materials Engineering and Performance, 27(11), 2018, 5675-5688. (https://doi.org/10.1007/s11665-018-3681-3) ISSN: 1059-9495 (SCIE)

4. “Formability and Fracture Behaviour of Cryorolled Al-3 Mg-0.25 Sc Alloy”, S. Vigneshwaran, K. Sivaprasad, R. Narayanasamy K. Venkateswarlu, Materials Science and Engineering A, 721, 2018, 14-21. (DOI.org/10.1016/j.msea.2018.02.072) ISSN: 0921-5093(SCI)

5. “Microstructure and Mechanical properties of Cu-7wt.% Al Alloy produced by equal channel angular pressing with different routes”, M. Chinababu, KondaiahGudimetla, K. Sivaprasad, B. Ravisankar, Materials Today: Proceedings, 5 (2), Part 2, 2018, 8241-8248 (SCOPUS)

6. “Effect of Frequency and Duty Cycle on Growth, Structure and Corrosion Resistance of Micro Arc Oxidation Coating on RZ5 Magnesium Alloy”, Ram Kumar V, Muthupandi V, Sivaprasad K, BalaSrinivasan P, Key Engineering Materials, 775, 2018, 291-297. (doi:10.4028/www.scientific.net/KEM.775.291) ISSN: 1662-9795 (SCOPUS)

7. “Characterization of Laser Welded Al0.5CoCrFeNi High Entropy Alloy”, R.Sokkalingam, K.Sivaprasad, V Muthupandi, M.Duraiselvam, Key Engineering Materials, 775, 2018, 448-453. (doi:10.4028/www.scientific.net/KEM.775.448) ISSN: 1662-9795 (SCOPUS)

2017

8. “Enhanced relative slip distance in gas tungsten arc welded Al0.5CoCrFeNi high entropy alloy”, Sokkalingam R, Sourav Mishra, SrinivasaRakeshCheethirala, V. Muthupandi, K.SivaprasadMetallurgical and Materials Transactions A, 48 (8), 2017, 3630-3634 (SCI) ISSN: 1073-5623

9. “Microstructural Characterization and Mechanical Properties of Diffusion Bonded Ti–Ni In Situ Metal Intermetallic Laminates”, N. Thiyaneshwaran, M. Ashfaq, R. Sidharth, G. Saikiran, K. Sivaprasad, B. Ravisankar, Transactions of the Indian Institute of Metals, 70 (3), 2017, 709-719. (SCIE) ISSN: 0972-2815

10. “Improving corrosion properties of magnesium AZ31 alloy GTA weld metal using micro arc oxidation process”, M. Siva Prasad, M. Ashfaq, N. Kishore Babu, A. Sreekanth, K. Sivaprasad, V. Muthupandi, International Journal of Minerals, Metallurgy and Materials, 24 (5) 2017, 566–573

11. “A Comparative Study on Microstructure and Mechanical Properties near Interface for Dissimilar Materials during Conventional V-Groove and Narrow Gap Welding”, R. Nivas, Santosh, Ravi, Gowtham Das, Swapan Kumar, Das, K. Sivaprasad, K Jagan, B. Mahato, Suranjith, PK Singh, Journal of Manufacturing Processes, 25, 2017, 274-283.

12. “Effect of Stress Relieve Annealing on Microstructure & Mechanical Properties of Welded Joints Between Low Alloy Carbon Steel and Stainless steel”, R. Nivas, G. Das, S.K. Das, B. Mahato, S. Kumar, K. Sivaprasad, P.K. Singh, and M. Ghosh, Metallurgical and Materials Transactions A 48, 2017, 230-245.(SCI) ISSN: 1073-5623 (Impact factor 1.627)

13. “Work hardening behavior of Ti/Al-based metal intermetallic laminates”, N. Thiyaneshwaran, K. Sivaprasad, B. Ravisankar, International Journal of Advanced Manufacturing Technology, 93 (1-4), 2017, 361-374. (DOI:10.1007/s00170-016-8863-2) (SCI) ISSN: 0268-3768

14. “On Plastic Deformation Behavior of Cryorolled AA8090 Alloy”, K.S.V.B.R. Krishna, M. Ashfaq, SarmaS.R. Akella, K.Sivaprasad, K. Venkateswarlu, Transactions of the Indian Institute of Metals, 70 (6), 2017, 1463-1475. (SCIE) ISSN: 0972-2815

15. “Mechanical Behavior and Void Coalescence Analysis of Cryorolled AA8090 Alloy”, K.S.V.B.R. Krishna, S. Vigneshwaran, K. Chandra Sekhar, Sarma S. R. Akella, K. Sivaprasad , R. Narayanasamy, K. Venkateswarlu, International Journal of Advanced Manufacturing Technology, 93 (1-4), 2017, 253-259. ISSN: 0268-3768 (DOI:10.1007/s00170-016-8863-2)

2016

16. “A study on work hardening and effect of triaxiality on fracture behaviour of some cryorolled aluminium alloys”, S.Vigneshwaran, K.S.V.B.R. Krishna, K.ChandraSekhar, K.Sivaprasad, K. Venkateswarlu, R.Narayanasamy, Materials Science and Engineering A, 678, 2016. 165-177. (DOI:10.1016/j.msea.2016.09.104) ISSN: 0921-5093

17. “Effect of Composition on Tensile and Impact Properties of Tungsten-Based Heavy Alloy”, P.V.Satyanarayana, R.Sokkalingam, K.Sivaprasad, A.K.Mukherjee, Materials Science Forum, 863, 2016, 40-44. (doi:10.4028/www.scientific.net/MSF.863.40) ISSN:1662-9752.

18. “Analysis and Characterization of the Role of Ni Interlayer in the Friction Welding of Titanium and 304 Austenitic Stainless Steel”, C.H. Muralimohan, M. Ashfaq, RouholahAshiri, V. Muthupandi, K. Sivaprasad, Metallurgical and Materials Transactions A, 47, 2016, 347-359. (SCI) ISSN:1073-5623(Impact factor 1.73) (DOI: 10.1007/s11661-015-3210-z)

2015

19. “Mechanical Anisotropy and Microstructural Changes During Cryorolling of Al-Mg-Si Alloy”, N. Naga Krishna, M. Ashfaq, P. Susila, K. Sivaprasad, K. Venkateswarlu, Materials Characterization, 107, 2015, 302-308. (SCI) ISSN: 1044-5803 (Impact factor 1.845) (DOI:10.1016/j.matchar.2015.07.033)

20. “Effect of coarse grain matrix content on the mechanical behavior of trimodaled AA 6061-TiO2 nanocomposite prepared by mechanical alloying”, S. Sivasankaran, K. Sivaprasad, R. Narayanasamy, M. Saravanan, International Journal of Advanced Manufacturing Technology, 78, 2015, 385-394. (SCIE) ISSN: 0268-3768 (Impact factor 1.779) (DOI:10.1007/s00170-014-6639-0)

21. “Effect of Cryorolling on the Mechanical Properties of AA5083 alloy and the Portevin-Le Chatelier Phenomenon”, K.S.V.B.R.Krishna, K.ChandraSekhar, R.Tejas, N.Naga Krishna, K.Sivaprasad, R.Narayanasamy, K.Venkateswarlu, Materials and Design, 67, 2015, 107-117. (SCIE) ISSN: 0261-3069 (Impact factor 3.171)

22. “Microstructural observation, consolidation and mechanical behavior of AA 6061 nanocomposites reinforced by g-Al2O3 nanoparticles”, D. Jeyasimman, K. Sivaprasad, S. Sivasankaran, R. Ponalagusamy, R. Narayanasamy, VijayakumarIyer, Advanced Powder Technology, 26(1) 2015, 139-148. (SCIE) ISSN:0921-8831 (Impact factor 1.642)

2014

23. “Evaluation of Microstructures and Mechanical Properties of Dissimilar Materials by Friction Welding”, C.H. Muralimohan, S. Haribabu, Y. Hariprasada Reddy, V. Muthupandi, K. Sivaprasad, Procedia Materials Science, 5 (2014) 1107-1113. ISSN: 2211-8128 (This paper is presented in AMME2014, organized by NITK Suratkal, held during March 27-29, 2014)

24. “Properties of Friction Welding Titanium-stainless Steel Joints with a Nickel Interlayer”, C.H. Muralimohan, V. Muthupandi, K. Sivaprasad, Procedia Materials Science, 5 (2014) 1120-1129. ISSN: 2211-8128 (This paper is presented in AMME2014, organized by NITK Suratkal, held during March 27-29, 2014)

25. “Characterization of NanocrystallineAlCoCrCuNiFeZn High Entropy Alloy Produced by Mechanical Alloying”, C. SajithBabu, K.Sivaprasad, V.Muthupandi, Jerzy A. Szpunar, Procedia Materials Science, 5 (2014) 1020-1026. ISSN: 2211-8128 (This paper is presented in AMME2014, organized by NITK Suratkal, held during March 27-29, 2014)

26. “Microstructural and Nanoindentation Studies Across Diffusion-Bonded Interfaces in Al/Cu Metal Intermetallic Laminates”, S. S. M. Kartheeka, K.V. Vamsi, B. Ravisankar, K. Sivaprasad, S. Karthikeyan, Procedia Materials Science, 6 (2014) 709-715. ISSN: 2211-8128 (This paper is presented in ICMPC2014, Hyderabad, organized by GokarajuRangaraju Institute of Engineering and Technology, Hyderabad, Andhra Pradesh, India , held during March 8-9, 2014)

27. “Thermal Analysis and Nanoindentaion Studies on NanocrystallineAlCrNiFeZn High Entropy Alloy”, C.SajithBabu, N.T.B.N.Koundinya, K.Sivaprasad, Jerzy A. Szpunar, Procedia Materials Science, 6 (2014) 641-647. ISSN: 2211-8128 (This paper is presented in ICMPC2014, Hyderabad, organized by GokarajuRangaraju Institute of Engineering and Technology, Hyderabad, Andhra Pradesh, India , held during March 8-9, 2014)

28. “The influence of aluminium intermediate layer in dissimilar friction welds”, MuralimohanCheepu, V.Muthupandi, K.Sivaprasad, International Journal of Materials Research (formerly: ZeitschriftfuerMetallkunde), 105(4), 2014, 350-357. (SCI) ISSN: 1862-5282 (Impact factor 0.69)

29. “Strengthening Contributions in Ultra High Strength Cryorolled Al-4wt%Cu-3wt%TiB2 in situ Composite”, N. Naga Krishna, K. Sivaprasad, P. Susila, Transaction of Nonferrous Metal Society of China, 24(3), 2014, 641-647. (SCIE) ISSN: 1003-6326 (Impact factor 0.917)

30. “Fabrication and consolidation behavior of Al 6061 nanocomposite powders reinforced by multi-walled carbon nanotubes”, D. Jeyasimman, K. Sivaprasad, S. Sivasankaran, R. Narayanasamy, Powder Technology, 258, 2014, 189-197. (SCI) ISSN: 0032-5910 (Impact factor 2.02)

31. “An investigation of the synthesis, consolidation and mechanical behaviour of Al 6061 nanocomposites reinforced by TiC via mechanical alloying”, D. Jeyasimman, S. Sivasankaran, K. Sivaprasad, R. Narayanasamy, R.S. Kambali, Materials and Design, 57, 2014, 394-404 (SCIE) ISSN: 0261-3069 (Impact factor 2.913)

32. “Mechanical properties and corrosion behavior of carbon nanotube reinforced AA4032 nanocomposites”, M.S.SenthilSaravanan, K.Sivaprasad, S.P.KumareshBabu, Experimental Techniques, 38, 2014, 48-52. (SCIE) ISSN: 1747-1567 (Impact factor 0.378)

2013

33. “Phase Evolution and Thermal Analysis of NanocrystallineAlCrCuFeNiZn High Entropy Alloy Produced by Mechanical Alloying”, N.T.B.N.Koundinya, C.SajithBabu, K.Sivaprasad, P.Susila, N.KishoreBabu, J.Baburao, Journal of materials engineering and performance, 22, 2013, 3077-3084. (SCIE)ISSN: 1059-9495 (Impact factor 0.981)

34. “Tribological studies on laser surface melted Hastelloy C-276”, M. Hashim, K. E. SarathRaghavendraBabu, M. Duraiselvam, H. Natu, V. Muthupandi, K. Sivaprasad and K. R. Rajith, Surface Engineering, 29 (7), 2013, 531-535. (SCI) ISSN: 0267-0844 (Impact factor 1.51)

35. “Study on Cryorolled Al-Cu Alloy using X-ray Diffraction Line Profile Analysis and Evaluation of Strengthening Mechanisms”, N.Naga Krishna, R.Tejas, K.Sivaprasad, K.Venkateswarulu, Materials and Design, 52, 2013, 785–790. (SCIE) ISSN: 0261-3069 (Impact factor 2.913)

36. “Enhanced Mechanical Properties of AA5083 GTA Weldments with Current Pulsing and Addition of Scandium”, N. Kishore Babu, P. YogeshBhikanrao, K. SivaprasadMaterials Science Forum, 765, 2013, 716-720. ISSN: 1662-9752(This paper is presented in LMT2013, Old Windsor, London, organized by Brunel University, held during 24-26 July, 2013)

37. “Improving Corrosion Resistance of AA2014 Welds with Micro Arc Oxidation”, Roshan Jacob, S.A.Srinivasan, K.Sivaprasad, V.Muthupandi, Materials Science Forum, 765, 2013, 634-638. (This is presented in LMT2013, Old Windsor, London, organized by Brunel University, held during 24-26 July, 2013)

38. “Studies on Potentiodynamic Polarization Behavior of Cryorolled Al-Mg-Si Alloy”, N. Naga Krishna, B.Gopi, K. Sivaprasad, V. Muthupandi, Key Engineering Materials, 545, 2013, 153-157. ISSN: 1662-9795(This paper is presented in ICMST2012, National Science and Technology Development Agency, Thailand, held during 07-08 June, 2012)

39. “Studies on Dissimilar Welding of AA5083 and AA6061 Alloys by Laser Beam Welding”, B. Srinivas, K. Sivaprasad, N. Kishore Babu, V. Muthupandi, P.Susila, Advanced Materials Research, 626, 2013, 701-705. ISSN: 1662-8985 (This paper is presented in ICAMET2012, Universiti Malaysia Perlis, Malaysia, held during 28-30 November, 2012)

40. “Carbon Nanotube Reinforced Aluminium Alloy Composites - A Review”, D. Jeyasimman, K. Sivaprasad, V. Senthilkumar, R. Narayanasamy, Journal of Manufacturing Engineering, 8 (2), 2013, 75-84. ISSN: 0973-6867

41. “Dispersion and Thermal Analysis of Carbon Nanotubes reinforced AA 4032 alloy produced by High Energy Ball Milling”, M.S.SenthilSaravanan, K.Sivaprasad, S.P.KumareshBabu, Experimental Techniques, 37 (2013) 14–18. (SCIE) ISSN: 1747-1567 (Impact factor 0.583)

2012

42. “Microstructural characterization and grain refinement of AA6082 gas tungsten arc welds by scandium modified fillers”, N. Kishore Babu, Mahesh Kumar Talari, D. Pan, Z. Sun, J. Wei, K. SivaprasadMaterials Chemistry and Physics, 137, 2012, 543-551. (SCI) ISSN: 0254-0584 (Impact factor 2.072)

43. “Localized corrosion of an ultrafine grained Al-4Zn-2Mg alloy produced by cryorolling”, K.Gopala Krishna, K. Sivaprasad, T.S.N. Sankara Narayanan, K.C. Hari Kumar, Corrosion Science, 60, 2012, 82-89. (SCI) ISSN: 0010-938X (Impact factor 3.615)

44. “Influence of Titanium-Boron Additions on Grain Refinement of AA6082 Gas Tungsten Arc Welds”, N. Kishore Babu, Mahesh Kumar Talari, Pan Dayou, Sun Zheng, Wei Jun, K. SivaPrasad”, Materials and Design, 40, 2012, 467-475. (SCIE) ISSN: 0261-3069 (Impact factor 2.913)

45. “Mechanical properties and microstructures of Al-1Fe-(0-1)Zr bulk nano-crystalline alloy processed by mechanical alloying and spark plasma sintering”, C.L. Mendis, H.P. Jhawar, T.T. Sasaki, K Oh-ishi, K. Sivaprasad, E. Fleury, K. Hono, Materials Science and Engineering A 541, 2012, 152–158. (SCI)ISSN: 0921-5093 (Impact factor 2.108)

46. “Microstructural evolution and aging behavior of cryorolled Al-4Zn-2Mg alloy”, K.Gopala Krishna, K.Sivaprasad, K.Venkateswarlu, K.C.Hari Kumar, Materials Science and Engineering A 535, 2012, 129– 135. (SCI) ISSN: 0921-5093 (Impact factor 2.108)

47. “Effect of Rolling Temperature on Microstructure and Mechanical Properties of Cryorolled Al-Mg-Si Alloy Reinforced with 3wt% TiB2 in-situ Composite”, B. Gopi, N. Naga Krishna, K. Sivaprasad, K. Venkateswarlu, Advanced Materials Research, 584, 2012, 556-560. ISSN: 1662-8985(This paper is presented in ICRAM, VIT, India, held during 20-22 February, 2012)

48. “Dry sliding wear behaviour of fly ash particles reinforced AA 2024 composites”, J. BabuRao, D. VenkataRao, K. Siva Prasad and N.R.M.R. Bhargava, Materials Science-Poland, 30 (3), 2012, 204-211. (SCIE) ISSN 2083-1331 (Impact factor 0.258)

2011

49. “Microstructure, cold workability and strain hardening behavior of Trimodaled AA 6061-TiO2nanocomposite prepared by mechanical alloying”, S.Sivasankaran, K.Sivaprasad, R.Narayanasamy, Materials Science and Engineering A528, 2011, 6776– 6787. (SCI) ISSN: 0921-5093 (Impact factor 2.108)

50. “X-ray peak broadening analysis of AA 6061100-x-x wt.% Al2O3nanocomposite prepared by mechanical alloying”, S.Sivasankaran, K.Sivaprasad, R.Narayanasamy, P.V. Satyanarayana, Materials Characterization, 62, 2011, 661–672. (SCI) ISSN: 1044-5803 (Impact factor 1.88)

51. “Evaluation of compaction equations and prediction using adaptive neuro-fuzzy inference system on compressibility behavior of AA 6061100-x - x wt.% TiO2nanocomposites prepared by mechanical alloying”, S.Sivasankaran, K.Sivaprasad, R.Narayanasamy, Vijay Kumar Iyer, Powder Technology, 209, 2011, 124–137. (SCI) ISSN: 0032-5910 (Impact factor 2.02)

52. “High Temperature Tensile Properties of Cryorolled Al-4wt%Cu-3wt%TiB2 in situ Composites”, N.Naga Krishna, K.SivaprasadTransactions of Indian Institute of Metals, 64 (1-2), 2011, 63-66. (SCIE)ISSN: 0972-2815 (Impact factor 0.427)

53. “Anisotropy models in precise crystallite size determination of mechanically alloyed powders”, M.S.SenthilSaravanan, K.Sivaprasad, P.Susila, S.P.KumareshBabu, Physica B: Condensed Matter, 406, 2011, 165–168. (SCI) ISSN: 0921-4526 (Impact factor 1.327)

54. “Consolidation of CNT reinforced AA4032 nanocomposites by ECAP”, M.S.SenthilSaravanan, S.P.KumareshBabu, K.Sivaprasad, B.Ravisankar, P.Susila, B.S.Murty”, International Journal of Nanoscience, 10 (1&2), 2011, 233-236. (This paper is presented in ICANN2009, IIT Guwahati, India).ISSN: 0219-581X

55. “Influence of Crystallite Size on Consolidation of Carbon Nanotube Reinforced AA 4032 Composite Powders by Equal Channel Angular Pressing”, M.S.SenthilSaravanan, K.Sivaprasad, S.P.KumareshBabu, Key Engineering Materials, 471-472, 2011, 127-132. ISSN: 1662-9795(This paper is presented in ICCST 22-24 March, 2011, Universiti Putra Malaysia, Malaysia)

2010

56. “Effect of strengthening mechanisms on cold workability and instantaneous strain hardening behavior during grain refinement of AA6061-10wt.%TiO2 composite prepared by mechanical alloying”, S.Sivasankaran, K.Sivaprasad, R.Narayanasamy, Vijay Kumar Iyer, Journal of Alloys and Compounds, 507, 2010, 236–244. (SCI) ISSN: 0925-8388 (Impact factor 2.39)

57. “An investigation on flowability and compressibility of 6061 AA100-x-x wt. %TiO2 composite powder prepared by blending and mechanical alloying”, S.Sivasankaran, K.Sivaprasad, R.Narayanasamy, Vijay Kumar Iyer, Powder Technology, 201 (1), 2010, 70-82. (SCI) ISSN: 0032-5910 (Impact factor 2.02)

58. “Studies on void coalescence analysis of nanocrystallinecryorolled commercially pure aluminium under different stress conditions”, N.Naga Krishna, A.K.Akash, K.Sivaprasad, R.Narayanasamy, Materials and Design, 31, 2010, 3578–3584 (SCIE) ISSN: 0261-3069 (Impact factor 2.913)

59. “Synthesis, structure and sinterability of 6061 AA100-xx wt.%TiO2 composites prepared by high-energy ball milling”, S.Sivasankaran, K.Sivaprasad, R.Narayanasamy, Vijay Kumar Iyer, Journal of Alloys and Compounds, 491 (1-2), 2010, 712-721. (SCI) ISSN: 0925-8388 (Impact factor 2.39)

60. “Influence of short annealing treatment on corrosion behaviour of cryorolled commercially pure aluminium”, K.Sivaprasad, V.Swarnalatha, V.V.Ravikumar and V.Muthupandi, Anti-Corrosion Methods and Materials, 57 (1), 2010, 18-20. (SCIE) ISSN: 0003-5599 (Impact factor 0.386)

61. “Dry sliding wear behaviour of AA 6351-ZrB2 in situ composite at room temperature”, G. Naveen Kumar, R.Narayanasamy, S.Natarajan, S.P.KumareshBabu, K.Sivaprasad, S.Sivasankaran, Materials and Design, 31(3), 2010, 1526-1532 (SCIE) ISSN: 0261-3069 (Impact factor 2.913)

62. “Mechanically alloyed Carbon nanotubes (CNT) reinforced Nanocrystalline AA 4032: Synthesis and Characterization”, M.S.SenthilSaravanan, S.P.KumareshBabu, K.SivaprasadJournal of Minerals & Materials Characterisation & Engineering, 9 (11), 2010, 1027-1035. ISSN: 2327-4077

63. “Thermal stability of nanostructured fly ash synthesized by high energy ball milling”, J. BabuRao, P. Narayanaswami, K. Siva PrasadInternational Journal of Engineering Science and Technology, 2 (5), 2010, 284-299. ISSN 2141-2820.

64. “Techno-economics of carbon nanotubes produced by open air arc discharge method”, M.S.SenthilSaravanan, S.P.KumareshBabu, K.Sivaprasad, M.Jagannatham, International Journal of Engineering, Science and Technology, 2 (5), 2010, 100-108 ISSN 2141-2820

2009

65. “Microstructure and mechanical properties of fly ash particle reinforced AA6061 composites produced by press and extrusion”, P.R.S.Kumar, S.Kumaran, T.SrinivasaRao, K.SivaprasadTransactions of Indian Institute of Metals, 62(6) 2009, 559-566. (SCIE)

66. “Sliding wear behaviour of Al 6063/TiB2in situ composites at elevated temperatures”, S.Natarajan, R.Narayanasamy, S.P.KumareshBabu, K.Sivaprasad,G.Dinesh, B.Anil Kumar, Materials and Design, 30 (7) 2009, 2521-2531(SCIE) ISSN: 0261-3069 (Impact factor 2.913)

2008

67. “Study on abrasive and erosive wear behaviour of Al 6063/TiB2in situ composites”, K.Sivaprasad,S.Natarajan, S.P.KumareshBabu, B.Anil Kumar, G.Dinesh, R.Narayanasamy, Materials Science and Engineering A498 (2008) 495–500(SCI) ISSN: 0921-5093 (Impact factor 2.108)

68. “Microstructure and mechanical properties of ultra fine grained Cu-Zn and Cu-Al alloys produced by cryorolling and annealing”, V.SubramanyaSarma, K.Sivaprasad,D.Sturm and M.Heilmaier, Materials Science and Engineering A489 (2008) 253-258. (SCI) ISSN: 0921-5093 (Impact factor 2.108)

69. “Influence of weld cooling rate on microstructure and mechanical properties of Alloy 718 welds”,K.Sivaprasad and S.GaneshSundara Raman, Metallurgical and Materials Transactions A 39 (2008) 9, 2115-2127.(SCI) ISSN: 1073-5623 (Impact factor 1.627)

70. “A novel method of estimating Laves phase in electron beam welded Alloy 718”, K.Sivaprasad, S.GaneshSundara Raman and A.SambasivaRao, Practical Metallography 45 (2008) 6, 271-282. (SCIE) ISSN: 0032-678X (Impact factor 0.27)

2007

71. “Influence of magnetic arc oscillation and current pulsing on fatigue behavior of Alloy 718 TIG weldments”, K.Sivprasad and S.GaneshSundara Raman, Materials Science and Engineering A, 448, 2007, 120-127. (SCI) ISSN: 0921-5093 (Impact factor 2.108)

2006 & 2003

72. “Influence of magnetic arc oscillation and current pulsing on microstructure and high temperature tensile strength of alloy 718 TIG weldments”, K.Sivaprasad, S.GaneshSundara Raman, P.Mastanaiah and G.Madhusudhan Reddy, Materials Science and Engineering A 428, 2006, 327-331. (SCI) ISSN: 0921-5093 (Impact factor 2.108)

73. “Coupled effect of heat input and beam oscillation on mechanical properties of alloy 718 electron beam weldments” K.Sivaprasad, S.G.S.Raman, C.V.S.Murthy and G.M.Reddy, Science and Technology of welding and Joining, 11, 2006, 127-134. (SCI) ISSN: 1743-2936 (Impact factor 1.274)

74. "Microwave Processing of Functionally Graded Bioactive Materials", SivaprasadKatakam, D.Sivaramakrishna and T.S.Sampath Kumar, Materials Letters, 57, 2003, 2716-2721. (SCI) ISSN: 0167-577X (Impact factor 2.224)

National Journals

1. “Synthesis and characterization of CNT reinforced Al-based composite powders by high energy ball milling”, M.S. SenthilSavaranan, S.P. KumareshBabu and K. SivaprasadTransactions of Powder Metallurgy Association of India, 35, 2009, 5-8.

2. “Influence of carbon content on workability behavior of powder metallurgy steels”, R. Narayanasamy, V. Anandakrishnan, S. Sivasankaran, K. Sivaprasad, K.S. Pandey, Transactions of Powder Metallurgy Association of India, 35, 2009, 26-31.

3. "Processing of calcium phosphate based Functionally Graded Bioceramics using Microwaves", SivaprasadKatakam, D. Sivarama Krishna, R. Murugan and T.S. Sampath Kumar, Trends in Biomaterials and Artificial Organs, 17, 2003, 24-27.

Papers published in Conferences

International Conferences:

 

1. “ Direct Active Soldering of PEO Coated and Uncoated AA6061 Aluminium Alloy”, R. Sokkalingam, M.P. Shankar, Anoop K. Unni, K. Sivaprasad, VeerappanMuthupandi, International conference on Advanced Materials and Manufacturing Processes (ICAMMP-2018), organized by Jawaharlal Nehru Technological University (JNTU) Kakinada, College of Engineering Vizianagaram, during 30th& 31st March, 2018. Published in Advanced Materials Research (AMR), 2018, Trans Tech Publishers, Switzerland, Vol. 1148, Pp152-158.

2. “Studies on Dissimilar Friction Stir Welded Al–4Cu–TiB2 In Situ Composites with Base Alloy”, SangathotiHaribabu, M. Ashfaq, K. Sivaprasad, S. Muthukumaran, and R. Narayanasamy, International conference on Advanced Materials and Manufacturing Processes (ICAMMP-2018), organized by Jawaharlal Nehru Technological University (JNTU) Kakinada, College of Engineering Vizianagaram, during 30th& 31st March, 2018. Published in Advanced Materials Research (AMR), 2018, Trans Tech Publishers, Switzerland, Vol. 1148, Pp 165-175.

3. “Effect of Electrolyte on Micro Arc Oxidation Coating of Al-2014 Alloy”, M.P. Shankar, R. Sokkalingam, K. Sivaprasad and V. Muthupandi, International conference on Advanced Materials and Manufacturing Processes (ICAMMP-2018), organized by Jawaharlal Nehru Technological University (JNTU) Kakinada, College of Engineering Vizianagaram, during 30th& 31st March, 2018. Published in Advanced Materials Research (AMR), 2018, Trans Tech Publishers, Switzerland, Vol. 1148, Pp 159-164.

4. “Characterization of Laser Welded Al0.5CoCrFeNi High Entropy Alloy”, R.Sokkalingam, K.Sivaprasad, V Muthupandi, M.Duraiselvam, 8th International Conference on Key Engineering Materials (ICKEM 2018), held in Osaka, Japan during March 16-18, 2018. (SCOPUS Journal)

5. “Effect of gaussian beam on microstructural and mechanical properties of dissimilarlaser welding ofAA5083 and AA6061 alloys”, B. Srinivas, MuralimohanCheepu, K. Sivaprasad, V. Muthupandi, ICRAMMCE 2017, published in IOP Conference Series Materials Science and Engineering, 2018, 330 (1), 012066. (SCOPUS Journal)

6. “Studies on post weld heat treatment of dissimilar aluminum alloys by laser beam welding technique”, B Srinivas, NM Krishna, M Cheepu, K Sivaprasad, V Muthupandi, ICRAMMCE 2017, published in IOP Conference Series: Materials Science and Engineering 2018, 330 (1), 012079. (SCOPUS Journal)

7. “Microstructure and Mechanical properties of Cu-7wt.% Al Alloy produced by Equal Channel Angular pressing with different routes”, M Chinababu, K Gudimetla, K Sivaprasad, B Ravisankar, Materials Today: Proceedings, 2018, 5 (2), 8241-8248. (SCOPUS Journal)

8. “Effect of Micro Arc Oxidation on Corrosion Behavior of Mg AZ31 Alloy GTA Welds”, M. Siva Prasad, M. Ashfaq, N. Kishore Babu, A. Sreekanth, K. Sivaprasad, V. Muthupandi, Proceedings of International Conference on Advances in Design and Manufacturing, National Institute of Technology Tiruchirappalli, India, December 5-7, 2014, pp.670-674.

9. “Microstructural Characterization and Mechanical Properties of Cryorolled AA8090 Alloy”, K.S.V.B.R. Krishna, M.Ashfaq, V. Varun, K. Sivaprasad, K. Venkateswarlu, Sarma SR. Akella, Proceedings of International Conference on Advances in Design and Manufacturing, National Institute of Technology Tiruchirappalli, India, December 5-7, 2014, pp.675-678.

10. “Low Melting and High Strength Bulk Nanocrystalline Lead Free Sn-07Cu Solder Alloy by Mechanical Alloying”, I. Narasimha Murthy, K. Sivaprasad, J. Baburao, Proceedings of International Conference on Advances in Design and Manufacturing, National Institute of Technology Tiruchirappalli, India, December 5-7, 2014, pp.718-723.

11. “Evaluation of Microstructures and Mechanical Properties of Dissimilar Materials by Friction Welding”, C.H. Muralimohan, S. Haribabu, Y. Hariprasada Reddy, V. Muthupandi, K. Sivaprasad, International Conference on Advances in Manufacturing and Materials Engineering (AMME), organized by NITK Suratkal, held during March 27-29, 2014.

12. “Properties of Friction Welding Titanium-stainless Steel Joints with a Nickel Interlayer”, C.H. Muralimohan, V. Muthupandi, K. Sivaprasad, International Conference on Advances in Manufacturing and Materials Engineering (AMME), organized by NITK Suratkal, held during March 27-29, 2014.

13. “Characterization of NanocrystallineAlCoCrCuNiFeZn High Entropy Alloy Produced by Mechanical Alloying”, C. SajithBabuK.Sivaprasad, V.Muthupandi, Jerzy A. Szpunar, International Conference on Advances in Manufacturing and Materials Engineering (AMME), organized by NITK Suratkal, held during March 27-29, 2014.

14. “Microstructural and Nanoindentation Studies Across Diffusion-Bonded Interfaces in Al/Cu Metal Intermetallic Laminates”, S.S.M. Kartheek, K.V. Vamsi, B. Ravisankar, K. Sivaprasad, S. Karthikeyan, 3rd International Conference on Materials Processing and Characterization (ICMPC 2014), Hyderabad, organized by GokarajuRangaraju Institute of Engineering and Technology, Hyderabad, Andhra Pradesh, India , held during March 8-9, 2014)

15. “Thermal Analysis and Nanoindentaion Studies on NanocrystallineAlCrNiFeZn High Entropy Alloy”, C.SajithBabu, N.T.B.N.Koundinya, K.Sivaprasad, Jerzy A. Szpunar, 3rd International Conference on Materials Processing and Characterization (ICMPC 2014), organized by GokarajuRangaraju Institute of Engineering and Technolog, Hyderabad, Andhra Pradesh, India, held during March 08-09, 2014.

16. “Joining of AISI 1040 Steel to 6082-T6 Aluminium Alloy by Friction Welding”, CH. Muralimohan, S.Haribabu, Y. Hariprasada Reddy, V. Muthupandi, K. Sivaprasad, Proceedings of International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID – 2014), Ponjesly College of Engineering, Nagercoil, India, held during March 7-8, 2014, pp1344-1348. [ISBN 978-93-80609-17-1]

17. “Enhanced Mechanical Properties of AA5083 GTA Weldments with Current Pulsing and Addition of Scandium”, N. Kishore Babu, P. YogeshBhikanrao, K.Sivaprasad, 6th International Conference on Light Metal Technology 2013,Old Windsor, London, organized by Brunel University, held during 24-26 July, 2013 (proceedings in Journal)

18. “Improving Corrosion Resistance of AA2014 Welds with Micro Arc Oxidation”, Roshan Jacob, S.A.Srinivasan, K.Sivaprasad, V.Muthupandi, 6th International Conference on Light Metal Technology 2013,Old Windsor, London, organized by Brunel University, held during 24-26 July, 2013 (proceedings in Journal)

19. “Wear behaviour of carbon nanotubes reinforced nanocrystalline AA 4032 composites”, M. S. SenthilSaravanan, S.P.KumareshBabuK. Sivaprasad, S. Natarajan, 26th International Conference on Surface Modification Technologies, June 20-22, 2012, EcoleCentraleLyon, France.

20. “Bimodal AA4032 alloy produced by ball milling: compressive deformation studies”, M.S.SenthilSaravanan, M.GaneshKumar, S.P.KumareshBabu, K.Sivaprasad, “Proceedings of the 3rd Asian Symposium on Materials and Processing (ASMP2012), Indian Institute of Technology Madras, Chennai, 30-31, August 2012.

21. “Studies on Potentiodynamic Polarization Behavior of Cryorolled Al-Mg-Si Alloy”, N. Naga Krishna, B.Gopi, K. Sivaprasad, V. Muthupandi, International Conference on Materials Science and Technology, 2012, National Science and Technology Development Agency, Thailand, held during 07-08 June, 2012.

22. “Effect of rolling orientation on the mechanical properties of cryorolled Al-Mg-Si alloy”, N. Naga Krishna, B. Gopi, K. Venkateswarulu, K. Sivaprasad.  International Conference on Recent Trends in Advanced Materials (ICRAM), February 20-22, 2012, VIT University, Vellore, India.

23. “Effect of rolling temperature on microstructure and mechanical properties of cryorolled Al-Mg-Si alloy reinforced with 3wt% TiB2in-situ composite”, B. Gopi, N. Naga Krishna, K. Sivaprasad, K. Venkateswarulu. International Conference on Recent Trends in Advanced Materials (ICRAM), February 20-22, 2012, VIT University, Vellore, India.

24. “Influence of rolling temperature on microstructure and mechanical properties of cryorolled Al-Mg-Si alloy”, B.Gopi, N. Naga Krishna, K. Venkateswarulu, K. Sivaprasad, Proceedings of International Conference on Aerospace, Mechanical, Automotive and Materials Engineering (ICAMAME) January 29-31, 2012, Dubai, United Arabian Emirates, organized by World Academy of Science Engineering and Technology (WASET). Vol 61, 2012, pp731-735.

25. “Influence of Crystallite Size on Consolidation of Carbon Nanotube Reinforced AA 4032 Composite Powders by Equal Channel Angular Pressing”, M.S.SenthilSaravanan, K.Sivaprasad, S.P.KumareshBabu, 8th International Conference on Composite Science and Technology (ICCST8), Universiti Putra Malaysia, Malaysia, March 22-24, 2011.

26. “High Temperature Tensile Properties of Cryorolled Al-4wt%Cu-3wt%TiB2 in situ Composites”, N.NagaKrishnaK.SivaprasadInternational Symposium of Research Students 2010, December, IIT Madras.

27. “Functionally gradient bioactive materials by EPO process”, K.Sivaprasad, Indo-German Frontiers of Engineering Symposium (INDOGFOE) 2010, held during 24-27 June 2010, Potsdam, Germany, sponsored by DST and Alexander von Humboldt foundation, Germany. (Invited participant)

28. “Synthesis and Characterization of CNT Reinforced AA4032 Nanocomposites by High Energy Ball Milling”, M.S. SenthilSaravanan, K.Sivaprasad, S.P. KumareshBabu, P. Susila, B.S. Murty, AIP Proceedings, 1276 (1), 2010, 82-87. (This paper is presented in ICANN2009, IIT Guwahati, India).

29. “Tribological behaviour of multi-walled carbon nanotubes reinforced AA7075 nanocomposites”, M.Jagannatham, M.S.SenthilSaravanan, S.P.KumareshBabu, K.Sivaprasad, International Conference on Synthesis Characterization Consolidation and Modeling of Nanomaterials (ICON-2010), Department of Metallurgical Engineering, PSG College of Technology, Coimbatore, India.

30. “Effect of grain refinement on workability of Al6061 alloy reinforced with 10wt% TiO2 composite”, S.SivasankaranK.Sivaprasad, R.Narayanasamy, Vijay Kumar Iyer, International Conference & Exhibition on Powder Metallurgy in processing of particulate materials and products 2010 (PM10), Jaipur, January 28-30, 2010.

31. “Isotropic and anisotropic X-ray peak broadening models of AA6061-12wt% Al2O3nanocomposites”, S.Sivasankaran, K.Sivaprasad, R.Narayanasamy, International Conference & Exhibition on Powder Metallurgy in processing of particulate materials and products 2010 (PM10), Jaipur, January 28-30, 2010.

32. “Synthesis and characterization of CNT reinforced AA4032 nanocomposites by high energy ball milling”, M.S.SenthilSaravanan, S.P.KumareshBabu, K.Sivaprasad, P.Susila, B.S.Murty, Proceedings of International Conference on Advanced Nanomaterials and Nanotechnology (ICANN 2009), IIT Guwahati, December 09-11, 2009, pp

33. “Consolidation of CNT reinforced AA4032 nanocomposites by ECAP”, M.S.SenthilSaravanan, S.P.KumareshBabu, K.Sivaprasad, B.Ravisankar, P.Susila, B.S.Murty”, Proceedings of International Conference on Advanced Nanomaterials and Nanotechnology (ICANN 2009), IIT Guwahati, December 09-11, 2009, pp

34. “Mechanical Alloying of Aluminium based-metal matrix composites: A Review”, R.NarayanasamyK.Sivaprasad, V.Anandakrishnan, S.Sivasankaran, 2nd International conference on Recent Advances in Material Processing Technology (RAMPT 2009), February 25-27, 2009, Society for Manufacturing Engineers (SME), National Engineering College, Kovilpatti, 2009, pp 164-170

35. “Influence of carbon content on workability behavior of powder metallurgy steels”, R.Narayanasamy, V.Anandakrishnan, S.SivasankaranK.Sivaprasad, K.S.Pandey. 5th International Conference on Powder Metallurgy 2009 (PM09), Goa, February 16-18, 2009.

36. “Synthesis and characterization of carbon nanotube reinforced AA4032 Al-alloy composite by high energy ball milling”, M.S.SenthilSaravananK.Sivaprasad, S.P.KumareshBabu, 5th International Conference on Powder Metallurgy (PM09), Goa, February 16-18, 2009.

37. “Studies on hot corrosion behavior of Cr-Mo boiler FCA weldments in Na2SO4 – NaCl Environment”, A.Appala Naidu, K.PullaRao, K.Sivaprasad, S.Jerome, S.P.KumareshBabu and Arivazhagan, Proceedings of International Conference on Symposium of Joining of Materials (SOJOM), July 2008, Indian Welding Society, Welding Research Institute, BHEL, Tiruchirappalli, India

38. “Development of Al-ZrB2 in situ Composites and its High Temperature Wear Behaviour”, K.Siva Prasad, S.P.KumareshBabu, S.SenthilKumaran and S.Natarajan, International Conference of Advanced Tribology, National University of Singapore, December 3-5, 2008, pp 19-20

39. “Sliding Wear Behaviour of WC-Coated Al-ZrB2 in situ Composite”, S.P.KumareshBabu, K. Siva PrasadS.SenthilKumaran, S.Jerome and S.Natarajan, International Conference of Advanced Tribology, National University of Singapore, December 3-5, 2008, pp 215-216

40. “Fatigue behavior of alloy 718 TIG welds made using pulsed current and magnetic arc oscillation”, K.SivaprasadS.GaneshSundara Raman, P.Mastanaiah and G.Madhusudhan Reddy, Proceedings of 9th International Fatigue Congress 2006, Atlanta, Georgia, USA.

41. “Fretting Fatigue Behaviour of AISI 304 Steel”, M.JayaprakashSivaprasadKatakam and S.GaneshSundara Raman, ISRS 2004, IIT Madras, Chennai.

42. “ Combination of high strength and corrosion resistance in AA5052 alloy using cryorolling and micro-arc oxidation” S Sunil Raj, B Blessto, S Dhanasekaran, K Sivaprasad, V Muthupandi, N Sriramani, Materials Today Proceedings, 2020.

43. “ Effect of Type and Concentration of Aqueous Solutions on Corrosion Behaviour of Plasma Electrolytic Oxide Films on ZM21 Mg Alloy” V Ram Kumar, V Muthupandi, K Sivaprasad - Materials Science Forum, 969, 2019, 309-314, International Conference on Aeromechanical Materials for Manufacturing, held during 13-14 Jul 2018, MLR Institute of Technology, Hyderabad, India.

44. “ Microstructure Characterization of Superalloy 718 during Dissimilar Rotary Friction Welding” M Cheepu, D Venkateswarlu, PN Rao, V Muthupandi, K Sivaprasad, Materials Science Forum 969, 2019, 211-217, International Conference on Aeromechanical Materials for Manufacturing, held during 13-14 Jul 2018, MLR Institute of Technology, Hyderabad, India.

45. “ Effect of Welding Speed on the Microstructure and Corrosion Properties of Weld and Heat Affected Zones in GTA Welded AA2014 Alloy” MP Shankar, R Sokkalingam, Bhavani Kosuri, K Sivaprasad, V Muthupandi, Materials Science Forum 969, 2019, 834-838, International Conference on Aeromechanical Materials for Manufacturing, held during 13-14 Jul 2018, MLR Institute of Technology, Hyderabad, India.

46. “ Correlating Tensile Properties with Microstructures of Various Regions in Gas Tungsten Arc Welded AA2014 Alloy” MP Shankar, R Sokkalingam, K Sivaprasad, V Muthupandi, Materials Science Forum 969, 2019, 22-26, International Conference on Aeromechanical Materials for Manufacturing, held during 13-14 Jul 2018, MLR Institute of Technology, Hyderabad, India.

47. “ Synthesis of metal catalyst carbon nanotubes by the arc-discharge method used for energy efficient applications” MSS Saravanan, T Nagaraj, S Mohan, SRK Singh, K Sivaprasad, AIP Conference Proceedings 2039 (1), 020072.

National Conferences

1. Sidharth R, Saikiran G, Thiyaneshwaran N, Siva Prasad K, “ Development of lightweight in-situ Metal Intermetallic Nickel-Titanium Laminates for ballistic applications” NCAMPC-2016 organized by Department of Metallurgical and Materials Engineering, NIT Warangal from 4th – 6th January 2016.

2. “ Friction welding of austenitic stainless steel to Cp-titanium with aluminum inserts”, CH Muralimohan, V Muthupandi, K Sivaprasad, M Ashfaq, National Conference on Advances in Naval Materials, ADNAM-2013, National Institute of Ocean Technology, IIT Madras.

3. “ Studies of Al 4032/CNT composite and study of its microwave sintering behavior”, M.S. SenthilSaravanan, S.P. KumareshBabu, K. Sivaprasad, M. Jagannatham, Eighth ISAMPE National Conference on Composites, Thiruvananthapuram, December 4-5, 2009.

4. “ Joining of AISI 304 to Alloy 718 by Pulsed Gas Tungsten Arc Welding”, G. Sudheer and K. Siva Prasad, NMD-ATM 2008, Greater Noida / New Delhi, November 14-16, 2008.

5. “Preparation and PbS and PbFexS1-x thin Films by chemical bath deposition”, E.Gomathi, G.Gobi, M.C.Santhoshkumar, T.Prasadarao, K.Siva Prasad, National Conference on emerging materials and Technologies for India – 2020, January 24-25, 2008, Dept. of Metallurgical and Materials Engineering, NIT Trichy, 52.

6. “Influence of Laves Phase on Fatigue Lives of IN 718 Welds”, SivaprasadKatakam and S. Ganesh Sundara Raman, NMD-ATM 2005, IIT Madras, India

7. “Fatigue of IN718 weldments”, SivaprasadKatakam, C.V.S. Murthy, G. Madhusudhan Reddy and S. Ganesh Sundara Raman, NMD ATM 2004, Trivandrum.

8. “Fabrication of bioactive FGM by microwave processing”, SivaprasadKatakam, D. Sivaramakrishna, Sushant K. Manwatkar and T.S. Sampath Kumar, National Conference on Medical Materials– 2001, IIT Madras, Chennai, India.

9. “Processing of calcium phosphate-based Functionally Graded Bioceramics using Microwaves", SivaprasadKatakam, D. Siva Rama Krishna, R. Murugan and T.S. Sampath Kumar, National Symposium of Research Scholars – 2002, IIT Madras, Chennai, India.