Academic year 2021-22 (till 15.07.22)
SI. No. |
TITLE OF THESIS |
NAME |
NAME OF THE GUIDE |
Institute |
year |
1.
|
Experimental investigations on machining of Hastelloy C276 under cryogenic condition |
J. KESAVAN |
Dr.V.Senthilkumar |
NITT |
2021 |
2. |
Microstructural characteristics and mechanical properties of Ti-6Al-4V alloy produced via Additive manufacturing process |
PAZHANIVEL B |
Dr. P. Sathiya |
NITT |
2021 |
3. |
Investigations on Fabrication, Optimization And Life Cycle Assessment Of Automotive Products Fabricated Using Fused Deposition Modelling |
RAMESH P |
Dr S Vinodh |
NITT |
2022 |
4 |
Laser Surface Texturing for improved adhesive and tribological properties of Thermal Spray Coated Ti-6Al-4V for Aero Engine application |
Vishal Uttamrao Bagade |
Dr. M. Duraiselvam |
NITT |
2022 |
5. |
Investigations on industry 4.0 implementation in an automotive component manufacturing organization |
Vishal Ashok Wankhede |
Dr. S. Vinodh |
NITT |
2022 |
Academic year 2020-21
SI. No. |
TITLE OF THESIS |
NAME |
NAME OF THE GUIDE |
INSTITUTE |
YEAR |
1. |
An Intelligent Ontological and Collaborative Modelling Framework for Geometric Tolerances |
A SARAVANAN |
Dr. J Jerald |
NITT |
2020 |
2. |
Implementation of Lean, Green and Sustainable Manufacturing Concepts in Indian SMEs |
S N SATHIYA NARAYANA |
Dr. P. Parthiban |
NITT |
2020 |
3. |
Experimental Investigations and Analysis on High-Speed Micro - Drilling of Superalloys |
T. VENKATESAN |
Dr. J Jerald |
NITT |
2021 |
4. |
A Comparative Study for Micro-Drilling in Hastelloy-X by using Laser and Laser Combined EDM and ECM |
SIVAPRASAD P V |
Dr. A. Noorul Haq Co-Guide: Dr. K. Pannerselvam |
NITT |
2021 |
5. |
Experimental Study of Joining Aluminium AA6063 and Stainless Steel AISI304L Dissimilar Alloys through Rotary Friction Welding Process with Different Joining Methods and Joining Trials |
S SENTHIL MURUGAN |
Dr. A. Noorul Haq Co-Guide: Dr. P. Sathiya |
NITT |
2021 |
6. |
Decision-Making Models for Managing Disruptions and Reputation Risk in Supply Chains |
VARTHINI R |
Dr. S. Prasanna Venkatesan |
NITT |
2021 |
7. |
Modeling and Assessment of Waste Electrical and Electronic Equipment Material Flow and Reverse Logistics in India |
KIRAN M |
Dr.S.Prasanna Venkatesan |
NITT |
2021 |
8. |
Some Investigations on Resource Allocation and Asset Tracking in field Service Management |
G JEGAN JOSE |
Dr. S. Kumanan Co-Guide: Dr.S.Prasanna Venkatesan |
NITT |
2021 |
9. |
Synthesis of AA7075-TiC Metal Matrix Composite Surface by Recursive Friction Stir Processing Technique |
GIRISH G |
Dr. V. Anandakrishnan |
NITT |
2021 |
10. |
Tribological Studies of AICrCoCuFeNi High Entropy Alloyed Ti-6AI-4V Substrate |
G PRABU |
Dr.-Ing M. Duraiselvam |
NITT |
2021 |
11. |
Experimental Investigations on Fused Deposition Modelling based 3D Printing of Polylactic Acid/Carbon Black (PLA - CB) Composite and its Applications |
SATHIES T |
Dr. P. Senthil |
NITT |
2021 |
12. |
Investigation on Static and Dynamic Characteristics of Fused Deposition Modelling 3D Printed Components using Representative Volume Element Numerical Analysis |
ANOOP M S |
Dr. P. Senthil |
NITT |
2021 |
13. |
Design and Development of Sustainable Additive Manufacturing Framework for Automotive Products |
ROHIT AGRAWAL |
Dr. S. Vinodh |
NITT |
2021 |
14 |
Development of a Decision Support System for Supplier Evaluation and Order Allocation in a Multi-Product Multi-Supplier Environment in a Heavy Industry in India |
DHARUN PRASHANTH K |
Dr. P. Parthiban |
NITT |
2021 |
15. |
Processing and Characterization of Polymeric Materials through Rotational Moulding Process. |
ABHILASH S S |
Dr.DLenin Singaravelu |
NITT |
2021 |
Academic year 2019-20
SI. No. |
TITLE OF THESIS |
NAME |
NAME OF THE GUIDE |
INSTITUTE |
YEAR |
1.
|
Investigations on Developing Framework for Sustainable Electronic Product Design and Performance Measurement |
MANJUNATHESHWARA K J |
Dr. S. Vinoth |
NITT |
2019 |
2.
|
Mechanical and Tribological Studies on Laser Surface Textured Nickel Based Superalloy |
PETER PRAKASH F |
Dr. Ing. M. Duraiselvam Co-Guide: Dr. S. Natarajan |
NITT |
2019 |
3. |
Development and Investigations on Dry Sliding Wear and Corrosion Behaviour of AA8011-ZrB2 and AA8011 – TiB2 in-Situ Metal Matrix Composites |
MUTHAMIZH SELVAN B M |
Dr.V. Anandakrishnan |
NITT |
2020 |
4. |
Investigations on the Tribological Behaviour of Magnesium Based Metal - Metal Composites |
S SATHISH |
Dr.V. Anandakrishnan |
NITT |
2020 |
5. |
Development of Non Asbestos Organic and Semi Metallic Friction Materials for Brake Applications |
VIJAY R |
Dr.D.Lenin Singaravelu |
NITT |
2020 |
6. |
Manufacturing and Characterization of Tungsten Particulate Reinforced High – Density Polyethylene and Epoxy resin Composites |
JENSON JOSEPH E |
Dr. K. Panneerselvam |
NITT |
2020 |
7. |
Electrical Discharge Surface Alloying of Aluminium 7075 with Nickel and Molybdenum Powder |
HAJA MAIDEEN A |
Dr.Ing.M. Duraiselvam |
NITT |
2020 |
8. |
Laser Surface Modification of CFRP Composite to Enhance Adhesive Bond Strength |
RAMKUMAR S |
Dr.Ing.M. Duraiselvam |
NITT |
2020 |
9. |
Experimental Investigations and Process Parameter Optimization of AA5083 Aluminium Alloy using Spin Arc Gas Metal Arc Welding Process |
POONGUZHALI V |
Dr. P. Sathiya |
NITT |
2020 |
10. |
Microstructure and Mechanical Performance of Inconel 625 Cladding Deposited on 316L Austenitic Stainless Steel by Cold Metal Arc Transfer and Hot Wire TIG Welding Processes |
EVANGELINE A |
Dr. P. Sathiya |
NITT |
2020 |
11. |
Investigation on Fused Deposition Modelling of Multifunctional ABS-CB Composite and its Applications |
JAYANTH N |
Dr. P. Senthil |
NITT |
2020 |
12. |
Performance Criteria Optimization for Open Shop Scheduling |
HUSSAIN LAL A |
Dr. A. Noorul Haq Co-Guide: Dr. R. Jeyapaul |
NITT |
2020 |
13. |
Vision-Based Path Planning and Parameter Optimisation |
LEO PRINCELY F |
Dr. T. Selvaraj Co-Guide: Dr. P. Senthil |
NITT |
2020 |
14. |
Integration of Human Factors and Ergonomics into Lean Manufacturing: An Action Research Approach in Textile Industry |
SAKTHI NAGARAJ T |
Dr. R. Jeyapaul |
NITT |
2020 |