Examination | Board / University | Year | Division/ Grade | Subjects |
---|---|---|---|---|
Ph.D. | Regional Engineering College - Bharathidasan University | 2007 | ||
M.E. | Regional Engineering College - Bharathidasan University | 1996 | Manufacturing Technology / I Class | |
B.E. | Mookambigai College of Engineering - Bharathidasan University | 1994 | Mechanical Engineering/ I Class |
Job Title | Employer | From | To |
---|---|---|---|
Professor | National Institute of Technology, Tiruchirappalli | 21-09-2022 | Till Date |
Associate Professor | National Institute of Technology, Tiruchirappalli | 12-03-2018 | 20-09-2022 |
Assistant Professor | National Institute of Technology, Tiruchirappalli | 01-07-2010 | 11-03-2018 |
Assistant Professor / Lecturer (S.S) | National Institute of Technology, Tiruchirappalli | 01-07-2007 | 30-06-2010 |
Lecturer | National Institute of Technology, Tiruchirappalli | 29-03-2006 | 30-06-2007 |
Assistant Professor | J.J. College of Engineering and Technology, Trichy | 01-07-2001 | 28-03-2006 |
Lecturer | J.J. College of Engineering and Technology, Trichy | 30-09-1996 | 30-06-2001 |
International Journals : 73
International Conferences : 30
National Conferences : 02
Position | Faculty/Department/Centre/Institution | From | To |
---|---|---|---|
Head of the Department |
Department of Production Engineering, NITT |
March-2022 |
Till date |
Associate Dean (FW) |
NITT |
21-12-2018 |
March-2022 |
Warden (Agate, Coral, Mess A & B) |
NITT |
21-02-2018 |
20-07-2019 |
Faculty In-Charge FESTEMBER 2018 |
NITT |
12-03-2018 |
11-03-2019 |
Staff advisor of PEA |
Department of Production Engineering, NITT |
01-06-2020 |
31-05-2021 |
Class Advisor |
Department of Production Engineering, NITT |
01-06-2018 |
31-05-2021 |
Project coordinator |
Department of Production Engineering, NITT |
01-06-2020 |
31-05-2021 |
Member in convocation committee |
NITT |
01-06-2018 |
24-09-2021 |
Department Member in Ph.D. Admission Committee |
Department of Production Engineering, NITT |
01-06-2018 |
24-09-2021 |
Member in convocation committee |
NITT |
01-01-2007 |
31-12-2017 |
Member in Ph.D. Admission Committee |
Department of Production Engineering, NITT |
01-05-2011 |
10-11-2017 |
Member in stock verification committee |
Department of Production Engineering, NITT |
01-04-2007 |
01-12-2016 |
Project coordinator for M.Tech |
Department of Production Engineering, NITT |
01-07-2013 |
31-05-2014 |
Staff advisor for M.Tech Class |
Department of Production Engineering, NITT |
01-07-2012 |
31-05-2014 |
Member in department level NBA committee |
Department of Production Engineering, NITT |
01-06-2008 |
02-05-2014 |
Faculty In-charge for purchasing materials/machine |
Department of Production Engineering, NITT |
01-06-2012 |
31-05-2013 |
Staff advisor of PEA |
Department of Production Engineering, NITT |
01-07-2010 |
01-07-2011 |
Project coordinator |
Department of Production Engineering, NITT |
01-07-2010 |
31-05-2011 |
Class Advisor |
Department of Production Engineering, NITT |
01-06-2008 |
31-05-2011 |
Member in core committee for implementation of DST |
NITT |
01-03-2009 |
01-03-2010 |
Member in publication committee in SCMIS conference |
NITT |
01-06-2007 |
31-05-2008 |
Position | Institution | From | To |
---|---|---|---|
Academic Expert member of the BOS, Mechatronics Engineering Program of Kumaraguru College of Technology, Coimbatore |
Kumaraguru College of Technology, Coimbatore |
2021 |
- |
Academic Expert member of the BOS, for B.E. (Mechanical Engineering) & M.E. (Manufacturing Engineering), M.Kumarasamy College of Engineering, Karur |
M.Kumarasamy College of Engineering, Karur |
2021 |
- |
Invited Lecture in MECHNOVA 19 |
PRIST, Thanjavur |
2019 |
- |
Invited Talk in Webinar |
SRMS CET Bareilly |
2021 |
- |
DC Member for Five Research Scholars |
Anna University |
2020 |
- |
DC Member for Three Research Scholars |
Anna University |
2019 |
- |
DC Member for Three Research Scholars |
Anna University |
2018 |
- |
Board of Studies - Updating the Curriculam |
KSR College of Technology, Tiruchengode |
2017 |
- |
Board of Studies - Updating the Curriculam |
KSR College of Technology, Tiruchengode |
2016 |
- |
Workshop |
Bannari Amman Institute of Technology, Satyamangal |
2010 |
- |
International Conference |
J.J.College of Engineering and Technology |
2012 |
- |
International Conference |
MME Department, NIT, Trichy |
2015 |
- |
DC Member |
Anna University |
2009 |
- |
DC Member |
Anna University |
2010 |
- |
DC Member |
Anna University |
2011 |
- |
DC Member |
Anna University |
2012 |
- |
DC Member |
Anna University |
2013 |
- |
DC Member |
Anna University |
2014 |
- |
DC Member |
Anna University |
2015 |
- |
DC Member |
Anna University |
2016 |
- |
DC Member |
Anna University |
2017 |
- |
Workshop |
VIT Vellore |
2016 |
- |
DC Member |
VIT Vellore |
2017 |
- |
DC Member |
VIT Vellore |
2016 |
- |
DC Member |
VIT Vellore |
2015 |
- |
Workshop |
Roever College of Engineering and Technology, Pera |
2013 |
- |
Workshop |
Kongunadu College of Engineering and Technolopy |
2015 |
- |
S. No. |
PG Thesis Title |
Student Name |
Year |
---|---|---|---|
1 |
Development of Multi Point Forming Tool for Incremental Sheet Metal Forming Process, Multiple Sheet Forming of Dual Phase Steel and Multi Point Incremental Forming of SS 420 Sheets |
K. A. SELVA RAJAN |
2022 |
2 |
Development of Proactive measure for improving Plant safety performance by mapping incidents root causes with Safety observations data |
Ankit Singh Rawat |
2022 |
3 |
Multi Objective Optimization and Investigation of Surface Roughness in Incremental Forming of duplex stainless steel grade 2205 |
Redkar Arjun Ganpat |
2022 |
4 |
Process Simulation of Single Point Incremental Forming using a Finite Element Model |
Nihad Najeeb |
2022 |
5 |
Formability Analysis and Multi Objective Optimization of duplex stainless steel grade 2205 in Single Point Incremental Sheet Forming |
Redkar Arjun Ganpat |
2021 |
6 |
Multi Objective Optimization of Single Point Incremental Forming of Perforated Sheet Using Desirability Function Method |
Nihad Najeeb |
2021 |
7 |
Modelling and Multi Objective Optimization of Single Point Incremental Sheet Forming on Cu Ni 70/30 |
Deepak Joy |
2021 |
8 |
Multi Response Optimization of Parameters in Incremental Sheetmetal Forming of Ni-200 Alloy |
Mohammed Rameez CK |
2021 |
9 |
Formability Evaluation of Cu-Ni 70/30 Alloy on Single Point Incremental Forming Method |
Deepak Joy |
2020 |
10 |
Formability of Nickel 200 Alloy by Incremental Sheet Metal Forming |
Mohammed Rameez CK |
2020 |
11 |
Multi Response Optimization on Single Point Incremental Forming of Hyperbolic Shape Cu/AI Bimetallic Sheet |
Aman Kumar Bharti |
2020 |
12 |
Optimization of Process Parameter for Single Point Incremental Forming on Titanium Alloy OT4-1 using Taguchi Grey Relational Analysis |
Rakesh Patel |
2020 |
13 |
Hybrid Optimization for Single Point Incremental Forming of SS 904L |
Shah Arjun Ramkripal |
2020 |
14 |
Investigations on Forming, Fracture and Corrosion Behavior of Stainless Steel 202 Sheet Formed by Single Point Incremental Forming Process |
Vignesh. G |
2020 |
15 |
IMPROVING PRODUCTIVITY of TUNNEL BORING MACHINES |
BHAVANA LEKSHMY MV |
2020 |
16 |
IMPROVING PRODUCTIVITY of TUNNEL BORING MACHINES |
BHAVANA LEKSHMY MV |
2019 |
17 |
Forming and Optimization for SPIF of Bimetallic Cu/Al Alloy Sheets |
Aman Kumar Bharti |
2019 |
18 |
Experimental Investigation of Single Point Incremental Forming on Titanium Alloy OT4-1 |
Rakesh Patel |
2019 |
19 |
Incremental Sheet Metal Forming of Aluminium 7475 Alloy |
Duddu Vinod Kumar |
2019 |
20 |
Formability Studies on AA6063 Alloy using the Single Point Incremental Forming Process |
Balkrishna |
2019 |
21 |
Optimization of Aluminium 7475 Alloy sheet during SPIF process |
Duddu Vinod Kumar |
2018 |
22 |
Optimization of Aluminium 6063 Alloy sheet during SPIF process |
Balkrishna |
2018 |
23 |
Optimization of Wall Angle in Incremental Sheet Metal Forming of Al-5083 Alloy |
M Jaipal Lambada |
2018 |
24 |
Optimization of Wall Angle in Incremental Sheet Metal Forming of Al-5754 Alloy |
Vangapalli Venkata Chandrasekhararao |
2018 |
25 |
Optimization of Wall Angle in Incremental Sheet Metal Forming of Al-1100 Alloy |
Shaik Saidhul |
2018 |
26 |
Incremental Sheet Metal Forming of Aluminium 5083 Alloy |
M Jaipal Lambada |
2017 |
27 |
Incremental Sheet Metal Forming of Aluminium 5754 Alloy |
Vangapalli Venkata Chandrasekhararao |
2017 |
28 |
Incremental Sheet Metal Forming of Aluminium 1100 Alloy |
Shaik Saidhul |
2017 |
29 |
Optimization of Formability and Spring Back in Multi Sheet Single Point Incremental Forming of Pure Aluminium Foil |
Neelkamal Haloi |
2016 |
30 |
Effect of Cryogenic Treatment on Formability in Incremental Sheet Metal Forming of Aluminium Sheets |
Surendra Singh Nagdali |
2015 |
31 |
Optimization of Process Parameters for Eelectro Chemical Machining of Stellite 6B |
Ram Krishna Raman |
2015 |
32 |
Modelling and Optimization of Process Parameters in Incremental Sheet Metal Forming of Al 6081 Alloy Using Genetic Algorithm Technique |
Devara Ravi Babu |
2014 |
33 |
Multiresponde Optimization of ECM Process Parameters for Titanium Carbide Using Grey Relation Analysis and DOE |
Pradeep Rathore |
2014 |
34 |
Parametric Optimization of Electrochemical Machining of Ni Based Alloy (Inconel 718) |
Ram Krishna Raman |
2014 |
35 |
Effect of Texture on Formability in incremental Sheet Forming of Al Sheets |
Surendra Singh Nagdali |
2014 |
36 |
Effect of Process Parameters on Formability in Incremental Forming of Sheet Metal |
D.Vinodhkumar |
2013 |
37 |
Optimization of ECM Process Parameters for Al 3% SIC Composite Using Taguchi Method and Anova Analysis |
Pradeep Rathore |
2013 |
38 |
Optimization of Multiple Hole Electrode for Electrical Discharge Machining of Tool Steel |
D.Ravichandra |
2012 |
39 |
Formability Study of Al-6061 Through Incremental Sheet Metal Forming |
E. Linganna Gowd |
2012 |
40 |
Electrical Discharge Machining of Die Steel With Bundled Electrode |
Pagidi Madhukar |
2012 |
41 |
The Influence of Tool Size and Rotation on as Incremental Forming Process |
D.Vinod Kumar |
2012 |
42 |
Electrical Discharge Machining of AISI D3 Tool Steel With Multiple Hole Electrodes |
R.Prasad Prathipati |
2011 |
43 |
Modelling of Grinding Process of Aluminium-Ti Boride Metal Matrix Composites |
Mathew Alex |
2010 |
44 |
Implementation of Activated TIG Process in Boiler Pressure Parts |
N.Srinivasan |
2010 |
45 |
Optimization of Parameters for Angularity and Squareness in EDm of Inconel 718 Using Grey Relational Analysis |
Sathosh Kumar B |
2010 |
46 |
Improvement of Performance EDM by Adaptive Control While Machining Inconel 718 as Workpiece With Copper Electrode of Different Profile |
Senkathir S |
2010 |
47 |
Formability of Perforated Aluminium 8081 Sheet |
Jain Raj V |
2009 |
48 |
Optimization Machining Parameters in Electrical Discharge Machining of Inconel 718 Using Grey Relational Analysis |
Santhosh Kumar B |
2009 |
49 |
Modelling and Experimental Study of Forces in Surface Grinding |
Mathew Alex |
2009 |
50 |
Taguchi Multiple Performance Characteristics Optimization of Electrical Discharge Machining of Ti Alloy Using Utility Concept |
A Palanisamy |
2008 |
51 |
Formality Limit Diagram of Perforated Aluminium 19000 Sheets |
N. Srinivasan |
2008 |
52 |
Modelling and Analysis of the Rapidly Resolidified Layer of SG Cast Iron in the EDM Process Through the Response Surface Methodology |
R.Dinakaran |
2007 |
53 |
Multi Objective Optimization of EDM Parameters Using Grey Relational Analysis for Ti Alloy |
A.Palanisamy |
2007 |
54 |
Determination of Forming Limit Diagram and Strain Distribution for HSLA Steels |
K.Amarendranath |
2006 |
55 |
The Machining Parameters Optimisation of Electrical Discharge Machining of EN31 Alloy Steel Using RSM |
R.Dinakaran |
2006 |
PG Courses Taught:
PR602 – Advanced Forming Technology
PR613 – Heat Treatment
PR617 - Manufacturing of Non-metallic Products
UG Courses Taught:
PRPC12 - Metallurgy and Materials Engineering
PRPC17 - Forming Technology
PRLR13 - Weldability and Formability Testing Lab
PRIR11 – Engineering Practice
MEIR12 – Engineering Graphics
Title of Project | Funding Agency | From | To | Ongoing/ Completed |
---|---|---|---|---|
Forming Limit Diagram, Wrinkling Limit Diagram and other Test Results for TISCO High Tensile Interstitial Free and other Steel Sheets | TATA Steel, the TATA Iron and Steel Company Limited | 14-07-2005 | 31-03-2008 | Completed |
Formability of Low Nickel Stainless Steels | Salem Steel Plant | 14-11-2006 | 14-11-2009 | Completed |
Name of the PhD Scholar | Title of PhD Thesis | Role(Supervisor/ Co-Supervisor) | Year of Award |
---|---|---|---|
Gunda Yoganjaneyulu | Investigations on the Formability, Fracture and Corrosion Behaviour of Titanium Grade 2 and Grade 4 Sheets Using Incremental Forming Process | Supervisor | 2020 |
C. Raju | Investigations on Incremental Forming of Pure Copper and Aluminium Sheets | Supervisor | 2017 |
N. Manikandan | Investigations on Electrochemical Drilling of Superalloys and Titanium alloys | Co-Supervisor | 2017 |
L. Selvarajan | Investigations on Electrical Discharge Machining (EDM) of Conductive Ceramic Composites | Supervisor | 2016 |
K. Elangovan | Statistical Analysis and Modelling of Experimentally Evaluated Forming Limit Strains of Perferated Aluminium Alloy Sheets | Supervisor | 2011 |
Title of Activity | Level of Event (International/ National/ Local) | Date (s) | Role | Venue |
---|---|---|---|---|
Role of Quality of Problems and Feedback in Learning | International | 21-07-2020 | Coordinator | National Institute of Technology, Trichy - 15 |
How Teachers Can Make a Difference | International | 03-08-2020 to 07-08-2020 | Coordinator | National Institute of Technology, Trichy - 15 |
E-Content Development | International | 10-08-2020 to 14-08-2020 | Coordinator | National Institute of Technology, Trichy - 15 |
The Sexual Harassment of Women at Workplace (Prevention, Prohibition and Redressal) | International | 19-08-2020 | Coordinator | National Institute of Technology, Trichy - 15 |
Metal Forming and Powder Metallurgy | International | 28-01-2008 to 30-01-2008 | Coordinator | National Institute of Technology, Trichy - 15 |
Composite Materials: Processing Challenges and Opportunities | International | 13-07-2009 to 24-07-2007 | Coordinator | National Institute of Technology, Trichy - 15 |
Emerging Trends in Manufacturing Technology | International | 26-09-2016 to 01-10-2016 | Coordinator | National Institute of Technology, Trichy - 15 |
Advances in Manufacturing Technology | International | 08-08-2013 to 10-08-2013 | Coordinator | National Institute of Technology, Trichy - 15 |
Dr. C.Sathiya Narayanan
Professor
Production Engineering Department
NIT Trichy - 620 015
TamilNadu , INDIA
Telephone : 0431-250-3511
Mobile: +91 98650 27102