SCI Journal Publications

  • N.Baskar, R.Saravanan, P.Asokan, G.Prabhaharan, "Ant Colony algorithm approach for multi-objective optimization and surface grinding operation", International Journal of Advanced Manufacturing Technology, Vol. 23, pp 311-317, 2004.

  • Noorul Haq A, Ravindran, D., Aruna, V and Nithiya, S. “A hybridisation of metaheuristics for flow shop scheduling” International Journal of Advanced Manufacturing Technology Vol.24 No.5-6, pp. 376-380, 2004.

  • Noorul Haq, A., Karthikeyan, T and Dinesh, M. “Scheduling decisions in FMS using a heuristic approach” International Journal of Advanced Manufacturing Technology Vol.22 No.5-6, pp. 374-379, 2004. 

  • G. Prabhakaran, P.Asokan, P.Ramesh, S. Rajendran, “Genetic-algorithm-based optimal tolerance allocation using a least cost model” International Journal of Advanced Manufacturing Technology, Vol. 24, 2004, pp 647-660.

  • J.Jerald, P.Asokan, G.Prabhaharan, R.Saravanan, "Scheduling Optimization of Flexible Manufacturing Systems using Particle Swarm Optimization algorithm", International Journal of Advanced Manufacturing Technology, Vol. 25, pp 964-971, 2005.

  • Muruganandam, G. Prabhaharan, P.Asokan, V. Baskaran, “A Memetic algorithm approach to the cell formation problem", International Journal of Advanced Manufacturing Technology, Vol.25, pp 988-997, 2005.

  • N.Baskar, P.Asokan, R.Saravanan, G.Prabhaharan, "Optimization of machining parameters for milling operations using Non-conventional methods", International Journal of Advanced Manufacturing Technology, Vol. 25, pp 1078-1088, 2005.

  • R.Saravanan, R.Siva Sankar, P.Asokan, K.Vijayakumar, G.Prabhaharan, "Optimization of Cutting conditions during continuous finished profile machining using non-traditional techniques", International Journal of Advanced Manufacturing Technology,. 26, pp 30-40, 2005.

  • Muruganandam, G. Prabhaharan, P.Asokan, V. Baskaran, “A Memetic algorithm approach to the cell formation problem", International Journal of Advanced Manufacturing Technology, Vol.25, pp 988-997, 2005.

  • Noorul Haq A and Venkumar, P. “Manufacturing cell formation using modified ART1 networks”, International Journal of Advanced Manufacturing Technology Vol.26 No.7-8, pp. 909-916, 2005.

  • Ravindran, D., Selvakumar, S.J  Sivaraman, R. and Noorul Haq A “Flow shop scheduling with multiple objective of minimizing makespan and total flow time” International Journal of Advanced Manufacturing Technology, Vol.25 No.9-10, pp. 1007-1012, 2005. 

  • Noorul Haq A, Sivakumar, K., Saravanan, R.and Muthiah, V. “Tolerance design optimization of machine elements using genetic algorithm” International Journal of Advanced Manufacturing Technology, Vol.25 No.3-4, pp. 385-391, 2005. 

  • C. Loganathan, R. Narayanasamy  , “Effect of mechanical properties on the wrinkling behaviour of three different commercially pure aluminium grades when drawn through conical and tractrix dies” Materials Science and Engineering: A, Vol. 406, No.s 1-2, pp. 229-253, 15 October 2005.

  • P.Asokan, N.Baskar, K.Babu, G.Prabhaharan, R.Saravanan, ”Optimization of Surface Grinding operations using Particle Swarm Optimization Technique”, ASME Journal of Manufacturing Science and Engineering, Vol.127, Nov’ 2005, pp 885-892.

  • R. Narayanasamy, C. Sathiya Narayanan , “Forming limit diagram for interstitial free steels Part I” Materials Science and Engineering: A, Vol. 399, No.s 1-2, pp. 292-307, 15 June 2005.

  • R. Ponalagusamy, R. Narayanasamy, P. Srinivasan , “Design and development of streamlined extrusion dies a Bezier curve approach” Journal of Materials Processing Technology, Vol. 161, No. 3, pp. 375-380, 30 April 2005. 

  • R. Narayanasamy, T. Ramesh, K.S. Pandey  , “An investigation on instantaneous strain hardening behaviour in three dimensions of aluminium–iron composites during cold upsetting” Materials Science and Engineering A, Vol. 394, No.s 1-2, Pp. 149-160, 15 March 2005.

  • R. Narayanasamy, T. Ramesh, K.S. Pandey  , “Some aspects on workability of aluminium–iron powder metallurgy composite during cold upsetting” Materials Science and Engineering A, Vol. 391, No.s 1-2, pp. 418-426, 25 January 2005.

  • P.Sathiya, S.Aravindan and A.Noorul Haq “Mechanical and metallurgical properties of friction welded 304 stainless steel” International Journal of Advanced Manufacturing Technology, Vol. 26, pp501-511, 2005.

  • Jeyapaul R, Shahabudeen P and Krishnaiah K “Quality Management Research by considering multi response problems in the Taguchi method- A review”, International Journal of Advanced Manufacturing Technology, Vol. 26, pp.1331-1337, 2005.

  • Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike, “Particle-laden liquid impact erosion characteristics of laser clad Ni-based intermetallic matrix composites with TiC and WC reinforcements”, Lasers in Engineering, Vol. 15, pp. 355-373, 2005.

  • J.Jerald, P.Asokan, R.Saravanan, “Simultaneous Scheduling of Parts and AGVs in an FMS using Adaptive Genetic Algorithm”, International Journal of Advanced Manufacturing Technology, UK, Vol. 29, pp. 584 – 589, 2006.

  • Venkumar, P and Noorul Haq A “Complete and fractional cell formation using Kohonen self-organizing map networks in a cellular manufacturing system”, International Journal of Production Research, Vol.44 No.20, pp. 4257-4271, 2006. 

  • Noorul Haq A and Tamizharasan, T “Investigation of the effects of cooling in hard turning operations” International Journal of Advanced Manufacturing Technology, Vol.30 No.9-10, pp. 808-816, 2006. 

  • Tamizharasan. T, Selvaraj, T and Noorul Haq A, “Analysis of tool wear and surface finish in hard turning” International Journal of Advanced Manufacturing Technology, Vol.28 No.7-8, pp. 671-679, 2006. 

  • Chandrasekaran, M., P.Asokan, S. Kumanan, T.Balamurugan, S.Nickolas, “ Solving Job Shop Scheduling Problem using artificial immune system” International Journal of Advanced Manufacturing Technology Vol.31 No. 5-6 pp.580-593, 2006.

  • Venkumar, P and Noorul Haq A “Fractional cell formation in group technology using modified ART1 neural networks”, International Journal of Advanced Manufacturing Technology, Vol.28 No.7-8, pp. 761-765, 2006. 

  • Noorul Haq A, Rengarajan, K and Jayaprakash, J, “A hybrid genetic algorithm approach to mixed-model assembly line balancing”,  International Journal of Advanced Manufacturing Technology, Vol.28 No.3-4, pp. 337-341, 2006.

  • Noorul Haq A, Sivakumar, K., Saravanan, R., Karthikeyan, K, “Particle swarm optimization (PSO) algorithm for optimal machining allocation of clutch assembly”, International Journal of Advanced Manufacturing Technology, Vol.27 No.9-10, pp. 865-869, 2006. 

  • Noorul Haq A and Kannan. G “Design of Integration of supplier selection and Multi Echelon distribution inventory model in a built-to-order supply chain environment”, International Journal Production Research, Vol. 44, No 10, pp. 1963-1985, 2006.

  • Noorul Haq A and Kannan. G  “Fuzzy Analytical Hierarchy Process for evaluating and selecting a vendor in a Supply Chain model”, International Journal of Advanced Manufacturing Technology, Vol. 29, pp. 826-835, 2006.

  • Noorul Haq, A.and Radha Ramanan, T. “A bicriterian flow shop scheduling using artificial neural network “, International Journal of Advanced Manufacturing Technology, Vol.30 No.11-12, pp. 1132-1138, 2006.

  • Guharaja, S, Noorul Haq, A and Karuppannan, K.M. “Optimization of green sand casting process parameters by using Taguchi's method”, International Journal of Advanced Manufacturing Technology, Vol.30 No.11-12, pp. 1040-1048, 2006.

  • R. Narayanasamy, V. Senthilkumar, K.S. Pandey  , “Some aspects of workability studies on hot forging of sintered high strength 4% titanium carbide composite steel performs” Materials Science and Engineering: A, Vol. 425, No.s 1-2, , pp. 121-130, 15 June 2006.

  • R. Narayanasamy, V. Senthilkumar, K.S. Pandey  , “Some aspects on hot forging features of P/M sintered iron preforms under various stress state conditions” Mechanics of Materials, Vol. 38, No. 4, pp. 367-386, April 2006.

  • R. Narayanasamy, C. Loganathan , “Study on wrinkling limit of commercially pure aluminium sheet metals of different grades when drawn through conical and tractrix dies” Materials Science and Engineering: A, Vol. 419, No.s 1-2, , pp. 249-261, 15 March 2006. 

  • C. Loganathan, R. Narayanasamy , “Wrinkling of commercially pure aluminium sheet metals of different grades when drawn through conical and tractrix dies” Materials Science and Engineering: A, Vol. 419, No.s 1-2, pp. 331-343, 15 March 2006. 

  • R. Narayanasamy, C. Sathiya Narayanan , “Some aspects on fracture limit diagram developed for different steel sheets” Materials Science and Engineering: A, Vol. 417, No.s 1-2, pp. 197-224, 15 February 2006.

  • R. Narayanasamy, T. Ramesh, K.S. Pandey  , “Some aspects on strain hardening behaviour in three dimensions of aluminium–iron powder metallurgy composite during cold upsetting” Materials & Design, Vol. 27, No. 8, pp. 640-650, 2006.

  • R. Narayanasamy, T. Ramesh, K.S. Pandey  , “Workability studies on cold upsetting of Al–Al2O3 composite material” Materials & Design, Vol. 27, No. 7, pp. 566-575, 2006.

  • R. Narayanasamy, R. Ponalagusamy, R. Venkatesan, P. Srinivasan  , “An upper bound solution to extrusion of circular billet to circular shape through cosine dies” Materials & Design, Vol. 27, No. 5, pp. 411-415, 2006.

  • K. Manisekar, R. Narayanasamy, S. Malayappan , “Effect of friction on barrelling in square billets of aluminium during cold upset forging” Materials & Design, Vol. 27, No. 2, pp. 147-155, 2006.

  • R. Narayanasamy, C. Sathiya Narayanan , “Forming limit diagram for Indian interstitial free steels” Materials & Design, Vol. 27, No. 10, pp. 882-899, 2006.

  • C. Loganathan, R. Narayanasamy, S. Sathiyanarayanan , “Effect of annealing on the wrinkling behaviour of the commercial pure aluminium grades when drawn through a conical die” Materials & Design, Vol. 27, No. 10, pp. 1163-1168, 2006.

  • Kumanan, S and O.V. Krishnaiah Chetty,“Estimating Product Development Cycle Time using Petrinets”, International Journal of Advanced Manufacturing Technology Vol.28 No.1-2, pp 215-220, 2006.

  • N.Baskar, P.Asokan, G.Prabhaharan, R.Saravanan, “Selection of Optimal Machining Parameters for Multi Tool Milling Operations Using a Memetic Algorithm”, Journal of Materials Processing Technology, Vol.  174, 2006,pp. 239-249.

  • Kumanan, S.,Jegan Jose, G., and K. Raja, “Multi-Project Scheduling using a Heuristic and a Genetic Algorithm”,  International Journal of Advanced Manufacturing Technology, Vol.31 No.3-4 pp. 360-366, 2006.

  • Satishkumar, S., P Asokan and S Kumanan , “Optimization Of Depth Of Cut In Multipass Turning Using Nontraditional Optimization Techniques” International Journal of Advanced Manufacturing Technology , Vol.29 No.3-4, pp. 232-238, 2006.

  • Chandrasekaran, M., P.Asokan, S. Kumanan, T.Balamurugan, S.Nickolas, “ Solving Job Shop Scheduling Problem using artificial immune system” International Journal of Advanced Manufacturing Technology Vol.31 No. 5-6 pp.580-593, 2006.

  • Sathish Kumar, S P.Asokan, S.Kumanan, “Optimization of depth of cut in multi-pass turning using nontraditional optimization techniques”, International Journal of Advanced Manufacturing Technology, UK, 2006, Vol. 29, 230-238.

  • Jeyapaul R, Shahabudeen P and Krishnaiah K “Simultaneous Optimization of multi response problems in the Taguchi method using Genetic Algorithm”, International Journal of Advanced Manufacturing Technology, Vol.30, pp.870-878, 2006.

  • Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike,  Rolf Reiter, Jörg Oligmüller, “Cavitation erosion resistance of AISI 420 martensitic stainless steel laser-clad with nickel aluminide intermetallic composites and matrix composites with TiC reinforcement”, Surface and Coatings Technology Vol.201 1289-1295, 2006.

  • Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike, “Liquid impact erosion characteristics of martensitic stainless steel laser clad with Ni-based intermetallic composites and matrix composites”, Wear, Vol.261 pp.1140-1149, 2006.

  • Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike, “Laser clad WC reinforced Ni-based intermetallic-matrix composites to improve cavitation erosion resistance”, Journal of Laser Applications Vol.18, pp.297-304, 2006.

  • Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike,  Rolf Reiter, Jörg Oligmüller, G. Buvanashekaran, “Improvement of the cavitation erosion resistance of Ti-6Al-4V through laser alloying titanium aluminide based intermetallic matrix composites”, Lasers in Engineering, Vol. 16, pp.423-436, 2006.

  • Noorul Haq A and Tamizharasan, T, “Ring wear monitoring in IC engines: An acoustic emission approach” International Journal of Advanced Manufacturing Technology, Vol. 31  No.11-12, pp. 1148-1155, 2007. 

  • Noorul Haq A Saravanan, M., Vivekraj and A.R., Prasad, T. “A scatter search approach for general flowshop scheduling problem” International Journal of Advanced Manufacturing Technology, Vol.31 No.7-8, pp. 731-736, 2007.

  • R. Narayanasamy, V. Senthilkumar, K.S. Pandey , “Effect of titanium carbide particle addition on the densification behavior of sintered P/M high strength steel preforms during cold upset forming” Materials Science and Engineering: A, Vol. 456, Nos. 1-2, pp. 180-188, May 2007.

  • R. Narayanasamy, C. Sathiya Narayanan, N.L. Parthasarathi , “Some analysis on stress and strain limit for necking and fracture during forming of some HSLA steel sheets” Materials Science and Engineering: A, Vol.s 445-446, , pp. 427-439, 15 February 2007.

  • R. Narayanasamy, C. Sathiya Narayanan , “Forming limit diagram for interstitial free steels supplied by Ford India Motors” Materials & Design, Vol. 28, No. 1, Pp. 16-35, 2007.

  • A. Syed Abu Thaheer, R. Narayanasamy ,” Barrelling in truncated lubricated zinc cone billets during cold upset forging” Materials & Design, Vol. 28, No. 2, Pp. 434-440, 2007.

  • R. Narayanasamy, C. Sathiya Narayanan , “Experimental analysis and evaluation of forming limit diagram for interstitial free steels” Materials & Design, Vol. 28, No. 5, Pp. 1490-1512, 2007.

  • R. Narayanasamy, T. Ramesh, K.S. Pandey  , “ An experimental investigation on strain hardening behaviour of aluminium – 3.5% alumina powder metallurgy composite preform under various stress states during cold upset forming” Materials & Design, Vol. 28, No. 4, pp. 1211-1223, 2007.

  • N. Selvakumar, P. Ganesan, P. Radha, R. Narayanasamy, K.S. Pandey, “Modelling the effect of particle size and iron content on forming of Al–Fe composite preforms using neural network” Materials & Design, Vol. 28, No. 1, pp. 119-130, 2007.

  • R. Narayanasamy, C. Sathiya Narayanan , “Evaluation of limiting strains and strain distribution for interstitial free steel sheets while forming under different strain conditions” Materials & Design, Vol. 28, No. 5, pp. 1555-1576, 2007.

  • R. Narayanasamy, C. Loganathan , “The influence of friction on the prediction of wrinkling of prestrained blanks when drawing through a conical die” Materials & Design, Vol. 28, No. 3, pp. 904-912, 2007.

  • R. Ponalagusamy, R. Narayanasamy, K.R. Subramanian , “Prediction of limit strains in sheet metals by using new generalized yield criteria” Materials & Design, Vol. 28, No. 3, pp. 913-920, 2007.

  • S. Malayappan, R. Narayanasamy, K. Kalidasamurugavel, “A study on barrelling behaviour of aluminium billets during cold upsetting with an extrusion die constraint at one end” Materials & Design, Vol. 28, No. 3, pp. 954-961, 2007.

  • K. Manisekar, R. Narayanasamy , “Effect of friction on barrelling in square and rectangular billets of aluminium during cold upset forging” Materials & Design, Vol. 28, No. 2, pp. 592-598, 2007.

  • R. Narayanasamy, C. Sathiya Narayanan ,”Wrinkling behaviour of interstitial free steel sheets when drawn through tapered dies” Materials & Design, Vol. 28, No. 1, pp. 254-259, 2007. 

  • R. Narayanasamy, N. Selvakumar, K.S. Pandey  , “Phenomenon of instantaneous strain hardening behaviour of sintered Al–Fe composite preforms during cold axial forming” Materials & Design, Vol. 28, No. 4, pp. 1358-1363, 2007.

  • S. Malayappan, R. Narayanasamy, G. Esakkimuthu , “Barrelling of aluminium solid cylinders during cold upset forging with constraint at both ends” Materials & Design, Vol. 28, No. 4, pp. 1404-1411, 2007. 

  • Kumanan S ., J. Edwin Raja Dhasand Ashok Kumar. R,” Development of Welding Residual Stress Predictor using a Function-Replacing Hybrid System” International Journal of Advanced Manufacturing Technology Vol.31 No 11-12,pp.1083–1091, 2007.

  • P.Sathiya, S.Aravindan and A.Noorul Haq “Effect of friction welding parameters on mechanical and metallurgical properties of ferritic stainless steel” International Journal of Advanced Manufacturing Technology, Vol. 31, No. 11-12, pp 1076-1082, 2007.

  • Muthukannan Duraiselvam, Rolf Galun, Volker Wesling, Barry L. Mordike,  Rolf Reiter, Jörg Oligmüller, G. Buvanashekaran, “Cavitation erosion resistance of Ti-6Al-4V laser alloyed with TiC-reinforced dual phase intermetallic matrix composites”, Materials Science and Engineering A, Vol.63-68, pp. 454-455, 2007.

  • Muthukannan Duraiselvam, Rolf Galun, Stephan Siegmann, Volker Wesling, Barry L. Mordike, “Study of liquid impact erosion in B2-NiTi and Ti3Al Based intermetallic matrix composites on laser alloyed Ti-6Al-4V”, Advanced Engineering Materials, Vol.9, pp.171-176, 2007.

  • K. Sivaprasad, S. P. Kumaresh Babu, S. Natarajan, R. Narayanasamy, B. Anil Kumar, G. Dinesh  ,”Study on abrasive and erosive wear behaviour of Al 6063/TiB2 in situ composites” Materials Science and Engineering: A, Vol. 498, No.s 1-2, 20 December 2008, Pp. 495-500.

  • R. Narayanasamy, V. Anandakrishnan, K.S. Pandey  ,”Effect of carbon content on instantaneous strain-hardening behaviour of powder metallurgy steels” Materials Science and Engineering: A, Vol. 497, No.s 1-2, 15 December 2008, Pp. 505-511.

  • R. Narayanasamy, V. Anandakrishnan, K.S. Pandey    ,”Comparison of workability strain and stress parameters of powder metallurgy steels AISI 9840 and AISI 9845 during cold upsetting” Materials & Design, Vol. 29, No. 10, December 2008, Pp. 1919-1925

  • R. Narayanasamy, K. Baskaran, S. Arunachalam, D. Murali Krishna ,”An experimental investigation on barreling of aluminium alloy billets during extrusion forging using different lubricants” Materials & Design, Vol. 29, No. 10, December 2008, Pp. 2076-2088 

  • K. Baskaran, R. Narayanasamy, “Effect of various stress ratio parameters on cold upset forging of irregular shaped billets using graphite as lubricant under plane and triaxial stress state conditions” Materials & Design, Vol. 29, No.  December 2008, Pp. 2089-2103

  • R. Narayanasamy, V. Anandakrishnan, K.S. Pandey, “Effect of carbon content on workability of powder metallurgy steels” Materials Science and Engineering: A, Vol. 494, No.s 1-2, 25 October 2008, Pp. 337-342

  • A. Rajeshkannan, K.S. Pandey, S. Shanmugam, R. Narayanasamy   ,”Deformation behaviour of sintered high carbon alloy powder metallurgy steel in powder preform forging” Materials & Design, Vol. 29, No. 9, pp. 1862-1867, October 2008.

  • P.Asokan, R. Ravi Kumar, R. Jeyapaul, M.Santhi,   “Development of Multi objective optimization models for Electro Chemical Machining Process” International Journal of   Advanced manufacturing Technology, 2007, Vol.x (x-x), x.x. (published on line).(2008)

  • R. Narayanasamy, N.L. Parthasarathi, C. Sathiya Narayanan, T. Venugopal, H.T. Pradhan  , “ A study on fracture behaviour of three different high strength low alloy steel sheets during formation with different strain ratios” Materials & Design, Vol. 29, No. 9, pp. 1868-1885, October 2008.

  • R. Ponalagusamy, R. Narayanasamy, “Finite difference method for analysis of open-die forging of sintered cylindrical billets” Materials & Design, Vol. 29, No. 9, pp. 1886-1892, October 2008.

  • K. Baskaran, R. Narayanasamy , ”Some aspects of barrelling in elliptical shaped billets of aluminium during cold upset forging with lubricant” Materials & Design, Vol. 29, No. 3, pp. 638-661, 2008. 

  • C. Loganathan, R. Narayanasamy, “Wrinkling behaviour of different grades of annealed commercially pure aluminium sheets when drawing through a conical die”’ Materials & Design, Vol. 29, No. 3, pp. 662-700, 2008.

  • R. Narayanasamy, T. Ramesh, K.S. Pandey, S.K. Pandey , “Effect of particle size on new constitutive relationship of aluminium–iron powder metallurgy composite during cold upsetting” Materials & Design, Vol. 29, No. 5, pp. 1011-1026, 2008. 

  • R. Narayanasamy, V. Senthilkumar, K.S. Pandey ,”Some features on hot forging of powder metallurgy sintered high strength 4% titanium carbide composite steel performs under different stress state conditions “ Materials & Design, Vol. 29, No. 7, pp. 1380-1400, 2008.

  • R. Narayanasamy, C. Loganathan , “Study on wrinkling limit of interstitial free steel sheets of different thickness when drawn through Conical and Tractrix dies” Materials & Design, Vol. 29, No. 7, pp. 1401-1411, 2008.

  • R. Narayanasamy, V. Anandakrishnan, K.S. Pandey , “Effect of geometric work-hardening and matrix work-hardening on workability and densification of aluminium–3.5% alumina composite during cold upsetting” Materials & Design, Vol. 29, No. 8, pp. 1582-1599, 2008.

  • A. Syed Abu Thaheer, R. Narayanasamy  , “Comparison of barreling in lubricated truncated cone billets during cold upset forging of various metals” Materials & Design, Vol. 29, No. 5, pp. 1027-1035, 2008.

  • R. Narayanasamy, T. Ramesh, K.S. Pandey , “Some aspects on cold forging of aluminium–alumina powder metallurgy composite under triaxial stress state condition” Materials & Design, Vol. 29, No. 6, pp. 1212-1227, 2008.

  • R. Ponalagusamy, R. Narayanasamy, R. Venkatesan, S. Senthilkumar  , “Computer-aided metal flow investigation in streamlined extrusion dies” Materials & Design, Vol. 29, No. 6, pp. 1228-1239, 2008. 

  • K. Baskaran, R. Narayanasamy , “An experimental investigation on work hardening behaviour of elliptical shaped billets of aluminium during cold upsetting” Materials & Design, Vol. 29, No. 6, pp. 1240-1265, 2008.

  • R. Narayanasamy, K. Baskaran, D. Muralikrishna , “Some studies on stresses and strains of aluminium alloy during extrusion-forging at room temperature” Materials & Design, Vol. 29, No. 8, pp. 1623-1632, 2008.

  • R. Narayanasamy, M. Ravi chandran, N.L. Parthasarathi , “Effect of annealing on formability of aluminium grade 19000” Materials & Design, Vol. 29, No. 8, pp. 1633-1653, 2008.

  • R. Narayanasamy, C. Loganathan, J. Satheesh , “Some study on wrinkling behaviour of commercially pure aluminium sheet metals of different grades when drawn through conical and tractrix dies” Materials & Design, Vol. 29, No. 8, pp. 1654-1665, 2008.

  • R. Narayanasamy, R. Ponalagusamy, S. Raghuraman , “The effect of strain rate sensitivity on theoretical prediction of limiting draw ratio for cylindrical cup drawing process” Materials & Design, Vol. 29, No. 4, pp. 884-8902, 2008.

  • R. Narayanasamy, T. Ramesh, K.S. Pandey  , “Some aspects on cold forging of aluminium–iron powder metallurgy composite under triaxial stress state condition” Materials & Design, Vol. 29, No. 4, pp. 891-903, 2008.

  • R. Narayanasamy, C. Sathiya Narayanan , “Forming, fracture and wrinkling limit diagram for if steel sheets of different thickness” Materials & Design, Vol. 29, No. 7, pp. 1467-1475, 2008.

  • S.Vinodh, G.Sundararaj and S.R.Devadasan, “Total Agile Design System and its impact in contemporary organizational scenario”, Industrial Management and Data Systems Vol.108, No.8, pp.1111-1130, 2008.

  • S.Vinodh, G.Sundararaj, S.R.Devadasan, R.Maharaja, D.Rajanayagam and S.K.Goyal “DESSAC: A Decision Support System for quantifying and analyzing agility”, International Journal of Production Research, Vol. 46, No. 23, pp.6759–6780, 2008.

  • S.Vinodh, S.R.Devadasan and D. Rajanayagam, “The case of implementing Innovative Total Quality Function Deployment for preventing the sticking of latching star in electronic switches", Production Planning and Control, Vol.19, No.8, pp.754-769, December 2008  

  • R. Narayanasamy, R. Ravindran, K. Manonmani, J Satheesh ., “A crystallographic texture perspective formability investigation of aluminium 5052 alloy sheets at various annealing temperatures”,  Materials & Design, Vol. 30, No.5, pp. 1804-1817, May 2009.  

  • R. Narayanasamy, N.L. Parthasarathi, C. Sathiya Narayanan, “  Effect of microstructure on void nucleation and coalescence during forming of three different HSLA steel sheets under different stress conditions” Materials & Design, Vol. 30, No. 4, April 2009, pp. 1310-1324

  • R. Narayanasamy, T. Ramesh, M. Prabhakar, “ Effect of particle size of SiC in aluminium matrix on workability and strain hardening behaviour of P/M composite”’ Materials Science and Engineering: A, Vol. 504, No.s 1-2, 25 March 2009, pp. 13-23.

  • R. Ravindran, K. Manonmani, R. Narayanasamy, “An analysis of void coalescence in AL 5052 alloy sheets annealed at different temperatures formed under different stress conditions” Materials Science and Engineering: A, Vol. 507, No.s 1-2, 15 May 2009, pp. 252-267

  • R.Siva Sankar, P. Asokan, G.Prabharan, Venkata Phani,” A CAPP Framework with      optimized Process Parameters for Rotational Components", International Journal of       Production Research (In print).