International Conference Proceedings

1.      S.Vinodh and S.R.Devadasan, ‘Agile product development through CAD and IT’, International Summit on Agility, Design & Manufacturing (ADEMSE-2005), Bangalore University, Bangalore, December 10-13, 2005.

 

 

2.      S.Vinodh and S.R.Devadasan, ‘CAD,IT and Collaboration: The Enablers of Agile Product Development ’, International Conference & Exhibition on Total Engineering, Analysis & Manufacturing Technologies (TEAM TECH 2006), J.N.Tata Auditorium, Indian Institute of Science, Bangalore,  February 28-March2, 2006.

 

3.      S.Vinodh, G.Sundararaj and S.R.Devadasan, ‘Enablers of Total Agile Design System’, International Conference on Global Manufacturing and Innovation (GMI 2006), Coimbatore Institute of Technology, Coimbatore, July 27-29, 2006

.

4.      S.Narmadha, S.Vinodh, S.R.Devadasan and G.Ramesh, ‘Decision Support System for determining Agility index’, International Conference on Global Manufacturing and Innovation (GMI 2006), Coimbatore Institute of Technology, Coimbatore, July 27-29, 2006.

 

5.      S.Vinodh, G.Sundararaj, and S R. Devadasan, 2007,“Theory and Practice of CAD/CAM integration for attaining agility”, International Conference on Modeling and Simulation (CITICOMS 2007) held at Coimbatore Institute of Technology, Coimbatore, during August 27-29,2007.  The abstracts were given in the form of booklet. This paper appeared in page 118 of this booklet.

 

6.      S.Vinodh, G.Sundararaj, and S R. Devadasan,  2007,“Agility Quantification: An Imperative for achieving competitiveness in modern organizational scenario”, International Conference & Exhibition on Total Engineering Analysis & Manufacturing Technologies  (TEAMTECH 2007) held at Indian Institute of Science, Bangalore, during October 4-6,2007.  The abstracts were given in the form of booklet. This paper appeared in page 110 of this booklet.

 

7.      S.Vinodh, G.Sundararaj, and S R. Devadasan,  2007,“DESSAC: A Decision Support System for Agility Assessment”, 9th International Symposium on Measurement & Quality Control  (9th ISMQC) held at Indian Institute of Technology-Madras, Chennai, during November 21-24,2007.  The Proceedings were given in the form of booklet. This paper appeared in pages 343-347 of this booklet.

 

8.      S.Vinodh, G.Sundararaj, S R. Devadasan and D.Kuttalingam,  2007,“Mould analysis: An enabler of agility in mould design”, International Conference on Computer Aided Engineering  (CAE07) held at Indian Institute of Technology-Madras, Chennai, during December 13-15,2007.  The Proceedings were given in the form of booklet. This paper appeared in pages 545-551of this booklet.

 

9.      S.Vinodh, G.Sundararaj  and S.R.Devadasan (2008) ‘Impact of Total Agile Design System in Organisational Scenario’, International Conference on Digital Factory (ICDF 2008) held at Coimbatore Institute of Technology, Coimbatore, during August 11-13, 2008. 

10.   S.Vinodh, G.Sundararaj, S.R.Devadasan and S.Mahesh Kumar (2008) ‘Software support for agile quantification’, International Conference on Logistics and Supply Chain Management (ILSCM 2008) held at PSG College of Technology, Coimbatore, during August 7-9, 2008. 

11.   S.Vinodh, G.Sundararaj, and S R. Devadasan,  2008,“Software Support for Activity based costing of Total Agile Design System”, International Conference & Exhibition on Total Engineering Analysis & Manufacturing Technologies  (TEAMTECH 2008) held at Indian Institute of Science, Bangalore, during September 22-24,2008.  The abstracts were given in the form of booklet. This paper appeared in page 86 of this booklet.. This paper was awarded the best technical paper award.

 

 

12.   S.Vinodh, G.Sundararaj, and S R. Devadasan,  2008, “Achieving Agility in Design through Product Styling”, International Conference On Trends in Product Life Cycle, Modeling, Simulation and Synthesis (PLMSS-2008)  held at National Aerospace Laboratories, Bangalore, during November 17-19,2008.  The papers were given in the form of booklet. This paper appeared in pages 1-4 of this booklet.

 

13.   S.Vinodh, G.Sundararaj, and S R. Devadasan,  2008, “Activity Based Costing of Total Agile Design System”, 2nd International and 23rd All India Manufacturing Technology, Design, Research Conference (AIMTDR 2008)  held at Indian Institute of Technology, Chennai, during December 15-17,2008.  The proceedings were given in the form of a CD.

 

 

14.   T.Praveen, S.Vinodh, and U.R.Madhyasta  2009,“ Assessment of agility using Scoring and Multigrade fuzzy approaches”, International Conference & Exhibition on Total Engineering Analysis & Manufacturing  Technologies  (TEAMTECH 2009) held at Jnana Auditorium, Bangalore, during November 19-21,2009.  The abstracts were given in the form of booklet. This paper appeared in page 2 of this booklet.

 

15.   S.Vinodh, G.Sundararaj, S R. Devadasan and D.Kuttalingam  2009,“Design and Development of Agile Customisation Programme”, International Conference & Exhibition on Total Engineering Analysis & Manufacturing Technologies  (TEAMTECH 2009) held at Jnana Auditorium, Bangalore, during November 19-21,2009.  The abstracts were given in the form of booklet. This paper appeared in page 21 of this booklet. This paper was awarded the best technical paper award.

 

 

16.   S.Vinodh, G.Sundararaj, and SR.Devadasan 2009, “Agility, Innovation and Quality integrated customer voice translation through Agile ITQFD Technique”, PDMA India IV Annual International Conference on New Product Development: Challenges in Meltdown Times (NPDC 2009) organized by Departments of Mechanical Engineering and Management Studies held at IIT Madras, Chennai, during December 17-19,2009.  The abstracts were given in the form of booklet. This paper appeared in page 13 of this booklet.

 

 

17.   S.Vinodh, Somanaathan, M., Arvind, K.R. and Suresh Kumar Chintha.  2009, “Applying Value Stream Mapping to achieve a Lean Enterprise – A Case Study”, International Conference on Latest Trends in Simulation Modelling and Analysis (COSMA 2009) organized by Department of Mechanical Engineering held at National Institute of Technology, Calicut during December 17-19,2009.  The proceedings were given in the form of booklet. This paper appeared in pages 5-8 of this booklet.

 

18.   S.Vinodh, S.G.Gautham and R.Anesh Ramiya  2009, “Fuzzy ANP based Agile Concept Selection”, International Conference on Advances in Industrial Engineering Applications (ICAIEA 2010) organized by Department of Industrial Engineering held at Anna University, Chennai during January 6-8,2010.  The abstracts were given in the form of booklet. This paper abstract appeared in page 110 of this booklet.

 

19.   Vinodh,S.,  Selvaraj, T. and Praveen, T.  2010, “Agile Product Development through CAD and CAE”, International Conference on Recent Advances in Mechanical Engineering  (ICRAME2010) organized by Department of Mechanical Engineering, Nooru Islam University, Kumaracoil,  Tamil Nadu during April 8-9,2010.  The proceedings were given in the form of booklet. This paper appeared in page 527-529 of this booklet.

 

20.   S. Vinodh and Balaji, S.R. 2010, “Agility Measurement using Fuzzy Logic and its DSS”, International Conference on Frontiers in Mechanical Engineering  (FIME2010) organized by Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, Mangalore  during May 20-22,2010.  The abstracts were given in the form of booklet. This paper abstract appeared in page 124 of this booklet. 

 

21.   S.Vinodh, M.Prasanna and S.Manoj (2010) ‘Development of Decision Support System for Activity Based Costing’, 5th International Conference on Logistics and Supply Chain Management (ILSCM 2010) held at PSG Institute of Management, Coimbatore, during August 3-5, 2010.  The abstracts were given in the form of booklet. This paper abstract appeared in page 13 of this booklet. 

 

22.   S.Vinodh and Dino Joy (2010) ‘Structural equation model of lean manufacturing practices’, 5th International Conference on Logistics and Supply Chain Management (ILSCM 2010) held at PSG Institute of Management, Coimbatore, during August 3-5, 2010.  The abstracts were given in the form of booklet. This paper abstract appeared in page 19 of this booklet.  

 

23.   S.Vinodh, and Dinesh Kumar, C. (2010) ‘Software Support for Multi Grade Fuzzy Assessment of leanness’, 3rd International and 24th All India Manufacturing Technology Design and Research (AIMTDR) held at Andhra University College of Engineering, Andhra University, Visakhapatnam during December 13-15, 2010.  The proceedings were given in the form of booklet. This paper appeared in pages 279-282 of this booklet. 

 

24.   S.Vinodh, and Balaji, S.R. (2010) ‘Assessment of Leanness using Fuzzy Logic approach’, 3rd International and 24th All India Manufacturing Technology Design and Research (AIMTDR) held at Andhra University College of Engineering, Andhra University, Visakhapatnam during December 13-15, 2010.  The proceedings were given in the form of booklet. This paper appeared in pages 283-285 of this booklet. 

 

25.   S.Vinodh. and S.Aravind Raj (2011) ‘Computation of Agility Index using Scoring approach’, International Conference on Operational Excellence for Global Competitiveness - 2011 organized by Department of Industrial Engineering and Management held at R.V. College of Engineering, Bangalore during February 3-5, 2011.  The abstracts were given in the form of booklet. This abstract appeared in pages 91 of this booklet. 

 

26.   S.Vinodh. and S.Vasanth Kumar (2011) ‘A Study on the Impact of Lean Sigma Tools’, International Conference on Operational Excellence for Global Competitiveness - 2011 organized by Department of Industrial Engineering and Management held at R.V. College of Engineering, Bangalore during February 3-5, 2011.  The abstracts were given in the form of booklet. This abstract appeared in pages 92 of this booklet. 

 

27.   K.E.K.Vimal and S.Vinodh, 2011, “Lean Function Selection using Multu-Criteria Decision Making Method”, 5th International Conference on Advances in Mechanical Engineering (ICAME-2011) conducted by the Department of Mechanical Engineering, S.V.National Institute of Technology Surat, Gujarat, during June23-6-8, 2011.  The papers were given in the form of booklet. This paper appeared in pages 606-610 of this booklet. 

 

28.   R.Jeya Girubha and S.Vinodh (2011) ‘Application of PROMETHEE in Lean Manufacturing’, First International Conference in South Asia on Global Manufacturing Systems & Management organized by Department of Mechanical Engineering held at Coimbatore Institute of Technology, Coimbatore during August 1-3, 2011.  The proceedings were given in the form of booklet. This paper appeared in pages 68-70 of this booklet. 

 

29.   S.Aravind Raj and S.Vinodh (2011) ‘Fuzzy Inference Rules based agility evaluation’, First International Conference in South Asia on Global Manufacturing Systems & Management organized by Department of Mechanical Engineering held at Coimbatore Institute of Technology, Coimbatore during August 1-3, 2011.  The proceedings were given in the form of booklet. This paper appeared in pages 247-249 of this booklet.