Journals

Publications:
 
International Journal:
 
1.    J. Jerald, P. Asokan, G. Prabaharan, R. Saravanan, “Scheduling of Flexible Manufacturing Systems using Particle Swarm Optimization Algorithm”, International Journal of Advanced Manufacturing Technology, UK, Vol.25, pp.964-971, 2005.
 
2.    J. Jerald, P. Asokan, R. Saravanan, A. Delphin Carolina Rani, “Simultaneous Scheduling of Parts and AGVs in an FMS using Non-Traditional Optimization Algorithms”, International Journal of Applied Management and Technology, USA, Vol.3, No.1, pp. 305- 315, 2005
 
3.    J. Jerald, P. Asokan, R. Saravanan, A. Delphin Carolina Rani, “Simultaneous Scheduling of Parts and AGVs in an FMS using Adaptive Genetic Algorithm”, International Journal of Advanced Manufacturing Technology, UK, Vol. 29, pp. 584 – 589, 2006.
 
4.    J. Jerald, P. Asokan, G. Prabaharan, R. Saravanan, “Scheduling of Parts and AS/RS in an FMS using Genetic Algorithm”, International Journal of Applied Management and Technology, USA, Vol. 4, No.1, pp.25 - 34, 2006.
 
5.    P. Asokan, J. Jerald, S. Arunachalam, T.Page, “Application of the Adaptive Genetic Algorithm and Particle Swarm Optimization in the scheduling of Jobs and AS/RS in FMS”, International Journal of Manufacturing Research. Vol. 3, No. 4, pp. 393-405, 2008.
 
6.    J. Jerald, A.Gnanavel Babu, A. Noorul Haq, "Multi-Objective Scheduling of Jobs, Automated Guided Vehicles and Automated Storage/Retrieval System in Flexible Manufacturing System" International Journal for Manufacturing Science & Production, Vol. 9, Nos. 1-2, 2008, pp 61–80.
 
7.    N. Rajesh Mathivanan, J. Jerald, L.Sunith Babu, Ramesh. S.Sharma, “Experimental Investigation of Low-velocity Impact Characteristics of Polyurethane Foam based Sandwich Composites”, International Journal of Mechanical Engineering, Vol. 1, No. 2, pp. 163-167, 2008.
 
8.    A.Gnanavel Babu, J. Jerald, K. Narendar, A. Noorul Haq, “Simultaneous Scheduling of Machines and AGVs in FMS Environment”, Journal of Modern Manufacturing Technology, Vol 1. No. 1 pp 43 – 57, 2009.
 
9.    A. Gnanavel Babu, J. Jerald, A. Noorul Haq, “Scheduling of machines and AGVs in FMS using Sheep Flock Heredity Algorithm”, International Journal of Industrial Engineering Practices. (Accepted for publication)
 
10.  A, Gnanavelbabu, J. Jerald, A.Noorul Haq, V. Muthu Laxmi, T. Vigneswaralu,
"Scheduling of Machines and Automated Guided Vehicles in FMS
using Differential Evolution" International Journal of Production Research. (Accepted for Publication).
 
11.  A. Gnanavel Babu, J. Jerald, A. Noorul Haq, “Simultaneous Scheduling of Jobs, AGVs and AS/RS in FMS using Artificial Immune System” International Journal of Advances in Production Engineering and Management. (Accepted for publication).
 
 
12.  A. Gnanavel Babu, J. Jerald, A. Noorul Haq, “Particle Swarm Optimization for scheduling of Machines and Automated Guided Vehicles in Flexible Manufacturing Systems”, International Journal of Materials, Manufacturing and Optimization, (Accepted for publication).
 
13. A. Gnanavel Babu, J. Jerald, A. Noorul Haq, “Scatter Search for Multi-objective Scheduling of Machines and AGVs in Flexible Manufacturing Systems”, International Journal for Production Technology and Management. (Accepted for publication).
 
14.  R.Ramesh, J. Jerald, Tom Page, Subramaniyam Arunachalam, “ Concurrent Tolerance Allocation using an Artificial Neural Network and continuous Ant Colony Optimization”, International Journal of Design Engg., issue 2, Vol. 1, 2009. (Accepted for publication).
 
15. R.Ramesh, J. Jerald, “Concurrent Tolerance Allocation for Quality with Form Control using Genetic Algorithm”, International Journal of Manufacturing Research, (Accepted for publication).
 
16. R.Ramesh, J. Jerald, “Development of New Emprical Manufacturing Cost Tolerance Models”, International Journal of Materials, Manufacturing and Optimization, (Accepted for publication).
 
 
National Journal:
 
1.    K.Thangadurai, J. Jerald, P.Satheesh, R.Saravanan, “Optimization of Operating Parameters in Wire Electric Discharge Machining using Particle Swarm Optimization and Memetic Algorithm”, Journal of Manufacturing Technology Today, pp.11-15, Vol. 3, No. 11, 2004.
 
2.    J. Jerald, P. Asokan, R. Saravanan, A. Delphin Carolina Rani, “Simultaneous Scheduling of Parts and AGVs in an FMS using Genetic Algorithm”, Journal of Manufacturing Technology Today, pp.8-11, Vol. 3, No. 12, 2004.
 
3.    R.Ravikumar, P. Asokan, J. Jerald, M. Shanthi “Optimization of Parameters in Electro Chemical Machining using Non-Traditional Techniques”, Journal of Manufacturing Technology Today, pp.10-14, Vol. 7, No. 4, 2008.
 
4.    R.C.Paul, P.Asokan, J. Jerald, “Multi objective Facility Layout Problem using Particle Swarm Optimization” Journal of Institution of Engineers (India), Vol. 89 pp 1-6, Sep 2008.
 
 
International Conference:
 
1.    S. Muruganandam, J. Jerald, R. Saravanan, P. Asokan, “Optimization of Modern Manufacturing Systems using Genetic Algorithm (GA)”, International Conference on e-Manufacturing, Maulana Azad National Institute of Technology, Bhopal, 17-19 November 2002.
 
2.    J. Jerald, P. Asokan, G. Prabaharan, P. Satheesh,  “Scheduling Optimization of Flexible Manufacturing Systems using Memetic Algorithm”, International Conference on Responsive Supply Chain and Organizational Competitiveness (RSC 2004), Coimbatore Institute of Technology, Coimbatore, 5-7 January 2004.
 
3.    P. Asokan, M. Chandrasekaran, J. Jerald, “Application of Artificial Immune System Algorithm to Minimize Total Holding Cost of Completed and In-Process Products Subject with No Tardy Jobs”, 17th International Conference on Flexible Automation and Intelligent Manufacturing, The Pennsylvania   State University, Pennsylvania, USA, June 18-20, 2007.
 
4.    A. Gnanavel Babu, J. Jerald, A. Noorul Haq, “Multi objective Scheduling of Jobs, AGVs and AS/RS in FMS using Sheep flock Heredity Algorithm”, International Conference on Advances in Manufacturing Technology for Young Engineers, IITM, Chennai, 6-8 February, 2008
 
5.    A. Gnanavel Babu, P. Prabhaharan, J. Jerald, A. Noorul Haq, “Particle Swarm Optimization for Scheduling of Machines and AGVs in FMS”, International Conference on Advances in Manufacturing Technology for Young Engineers, IITM, Chennai, 6-8 February, 2008
 
6.    A. Gnanavel Babu, J. Jerald, P. Prabhaharan, A. Noorul Haq, “Scheduling Optimization of Machines and AGVs in Flexible Manufacturing Systems”, International Conference on Digital Factory, Coimbatore Institute of Technology, Coimbatore, 11-13, August 2008.
  
7.    A. Noorul Haq, A. Gnanavel Babu, J. Jerald, P. Asokan, K.Narendar, “Simultaneous Scheduling of Machines and Automated Guided Vehicles using Artificial Immune System”, The 6th International Conference on Manufacturing Research, UK, 9 - 11 September 2008.
 
8.    A. Gnanavel Babu, J. Jerald, A. Noorul Haq, “Multi-objective Scheduling of Machines and Material Handling systems in FMS Environment” The 6th International Conference on Supply Chain Management and Information systems, National Institute of Technology, Tiruchirappalli, 8-10, Dec. 2008.
 
9.    Gnanavel Babu, A. Noorul Haq, J. Jerald, “Artificial Immune System Based Scheduling for Machines and Material Handling Systems in FMS”, 2nd International and 23rd All India Manufacturing Technology, Design and Research Conference, IIT madras, Dec-2008, pp.51-57.
 
10. N. Rajesh Mathivanan, J. Jerald, Ramesh S. Sharma, “Influence of Core Density of Composite Structures subjected to Low-Velocity Impact”, International Conference on Emerging Research and Advances in Mechanical Engineering(ERA 2009), Velammal College of Engineering, Chennai, 19 – 21 March 2009.
 
 
National Conference:
 
1.    J. Jerald, P. Asokan, G. Prabaharan, R. Saravanan, “Scheduling of FMS using Ants Colony Optimization (ACO)”, National Conference on Modeling and Simulation in Manufacturing Systems (MOSIM 2003), Annamalai University, Chidambaram, pp. D55-61,15-16 March 2003.
 
2.    J. Jerald, P. Satheesh, P. Asokan, G. Prabaharan, “Scheduling Optimization of FMS Using Particle Swarm Optimization (PSO)”, National Conference on Modeling and Analysis of Production Systems (MAPS 2004), National Institute of Technology, Trichy, pp. 296-302, 22-23 January 2004.
 
3.    K. Thangadurai, J. Jerald, R. Saravanan, A. Balaji, “Optimization of Operating Parameters in Wire Electric Discharge Machining using Genetic Algorithm”, National Conference on Advancement in Electrical and Mechanical Engineering, Mailam Engineering College, Mailam, Dindivanam, 20-21 February, 2004.
 
4.    K. Thangadurai, J. Jerald, P.Satheesh, R. Saravanan, A. Balaji,“Optimization of Operating Parameters in WEDM Process using Simulated Annealing Algorithm through a Weighted Approach”, National Conference on Recent Developments in Materials Processing, Bharathiyar College of Engg. and Tech., Karaikal, pp. 86 – 89, 6 March 2004.
 
5.    D. Murugaraj, P.Satheesh, J. Jerald, “Developing a Hill Climbing Optimization for Manufacturing Cost Optimization in FMS”, National Conference on Development and Challenges in Manufacturing Engineering 2004, Manipal Institute of Technology, Manipal, pp. 685- 691, 20-22 March 2004.
 
6.    D. Murugaraj, P.Satheesh, J. Jerald, “Optimization of Manufacturing Cost for FMS using Memetic Algorithm”, National Conference on Development and Challenges in Manufacturing Engineering 2004, Manipal Institute of Technology, Manipal, pp. 698 – 704, 20-22 March 2004.
 
7.    M.S.R. Kumar, J. Jerald, P.Satheesh,“Memetic Algorithm based Approach for Sequence Dependent Schedule Generation for FMS Environment”, National Conference on Development and Challenges in Manufacturing Engineering 2004, Manipal Institute of Technology, Manipal, pp. 692 – 697, 20-22 March 2004.
 
8.    K. Thangadurai, J. Jerald, P.Satheesh, R. Saravanan, “Optimization of Operating Parameters in Wire Electric Discharge Machining using Memetic Algorithm”, National Conference on Development and Challenges in Manufacturing Engineering 2004, Manipal Institute of Technology, Manipal, pp. 525 – 532, 20-22 March 2004.
 
9.    D. Murugaraj, P.Satheesh, J. Jerald, “Manufacturing Cost Optimization in FMS Using Genetic Algorithms”, Conference on Advances in Materials and Manufacturing Technology, IIT Madras, Chennai, pp. 141 – 142, 2 April 2004.
 
10. K. Jaganathan, J. Jerald, P.Satheesh,“Optimization of Tool Requirement Planning in CNC Machines”, All India Manufacturing Technology Design and Research Conference (AIMTDR), VIT, Vellore, 20-22 December 2004.
 
11. P. Asokan, J.Jerald, “Integrated Scheduling of Jobs, AGVs and AS/RS in an FMS using Particle Swarm Optimization”, National Conference on Automation, Robotics and Soft Computing, NIT, Warangal, pp. 251 – 253, 17 – 18 January 2007.
 
12. A. Gnanavel Babu, J. Jerald, A. Noorul Haq, “Multi objective Scheduling of Jobs, AGVs and AS/RS in FMS using Artificial Immune System”, National Conference on Emerging Trends in Mechanical Engineering and Sciences, Bannari Amman Institute of Technology, Sathiyamangalam, pp. 229 – 239, 19-20 December, 2007.
 
13. A. Gnanavel Babu, J. Jerald, A. Noorul Haq, “Scheduling of Machines and AGVs in FMS using Sheep Flock Heredity Algorithm”, National Conference on Recent in Manufacturing & Management, Annamalai University, Chidambaram, 08-09 February, 2008.
 
14.  N. Rajesh Mathivanan, J. Jerald, Puspita Behera, R. Priyadharshini, “Analytical Prediction of Low-velocity Impact Response of Sandwich Panels”, National Conference on Discover Real Engineers and Mechanical Simulations, Perambalur, Tamilnadu, India, 2009, pp 8-15.
 
15.  R. Ramesh, J.Jerald, “Concurrent Optimization of Assembly Tolerances for Quality using Scatter Search”, National conference on Recent advances in Manufacturing Technology, 2009, pp.25-32.