Administrative Experience

Name: Dr.S. Senthil Kumar

PG Projects Details:

S. No

Title

Student Name

Year

  1.  

Designing the control of inverter with ancillary service provision enabled in grid connected mode operation

Rounak Chakraborty

June-2023

  1.  

Design and development of switched mode power supply for aircraft and low power applications

Alva Ravindra Reddy

May-2023

  1.  

Partial power processing approach employing a phase -shifted full bridge converter for electric vehicle charging applications

Alva Ravindra Reddy

Dec-2022

  1.  

Design and development of energy efficient Welding power supply

Thatipelli Shivaji

May 2022

  1.  

Design and development of energy efficient DC charger for EV batteries

Nakarani Mayur Dineshbhai

May 2022

  1.  

Redesigning of electrical power supply panels to ensure load protection

Ekta Malia

May 2022

  1.  

Development of control strategy for Fast charging of battery employing partial power processing converter

Ekta Malia

Dec 2021

  1.  

“Design and Development of energy efficient DC charger for EV batteries”

Nakarani Mayur Dineshbhai

Dec 2021

  1.  

“Extension of Voltage Ranges for Deeply Depleted Battery Charging Employing Resonant Power Converter”

Thatipelli Shivaji

Dec 2021

  1.  

Development of Energy saving Techniques for Multiple Induction Motor Drives

Pusparanjan Behera

August

2021

  1.  

Development of Partial Power Processing for Battery Charging Applications

Gudhipela Veeranallaiah

May 2021

  1.  

Vector Generation for Post SI Validation of SoC

Lakshmi Prathyusha Pydi

May 2021

  1.  

Design and Development of Energy Efficient DC power Supply Employing SiC Devices for Data center Applications

Lakshmi Prathyusha Pydi

Dec 2020

  1.  

Development of Partial Power Processing for Battery Charging Applications

Gudhipela Veeranallaiah

Dec

  1.  

Experimental Investigation on Solar PV soft Switching DC-DC Converter System for Battery charging Applications

Naman Agrawal

June 2020

  1.  

Prototype Development of test-bed for electronic welding machine

A Sai sivani

June 2020

  1.  

Investigation on Solar PV soft Switching DC-DC Converter System for Battery charging Applications

Naman Agrawal

Dec 2019

  1.  

Development of test-bed for electronic welding machine

A Sai sivani

Dec 2019

  1.  

Development of Multiport DC-DC Converters for Standalone Solar Photovoltaic Applications

Dibyaraj Krishna Behera

June 2019

  1.  

Integrated Battery Management System Employing Multiport DC/DC Converter for Standalone Solar Photovoltaic System(experimental)

Sanchari Banerjee

May 2019

  1.  

Maximum Power from PV Array using fixed Configuration under Different Shading Conditions(experimental)

Rupesh Kumar

May 2019

  1.  

Enhancing Energy Efficiency of Multiple Induction Motor Drive for Belt Conveyor System(experimental)

Pallapu Venkata Ramana

May 2019

  1.  

A Fault Detection Algorithm to identify Various Faults in Photovoltaic System (Simulation)

Sanchari Banerjee

Dec2018

  1.  

Maximum Power from PV Array using fixed Configuration under Different Shading Conditions(Simulation)

Rupesh Kumar

Dec2018

  1.  

Enhancing Energy Efficiency of Multiple Induction Motor Drive for Belt Conveyor System (Simulation)

Pallapu Venkata Ramana

Dec2018

  1.  

Development of Distributed MPPT in Solar PV Systems

Yellamilli Nitish

May 2018

  1.  

Study of Distributed MPPT in Solar PV Systems

Yellamilli Nitish

Dec 2017

  1.  

Development of Control Scheme for Boost Derived Hybrid Converter for Solar PV Applications. (experimental)

Laveti Arjun

2017

  1.  

Development of Control Strategy for Single Stage Grid-Connected Solar PV System. (experimental)

Pilli Madhu Kiran

2017

  1.  

Development of Control Scheme for Boost Derived Hybrid Converter for Solar PV Applications. (simulation)

Laveti Arjun

2016

  1.  

Development of Control Strategy for Single Stage Grid-Connected Solar PV System. (simulation)

Pilli Madhu Kiran

2016

  1.  

Control of Single Inductor Based Dual Output/Input Boost DC-DC Converter for Solar PV Applications. (experimental)

Dipankar Biswas

2016

  1.  

Operation and Closed Loop Control of Single-Phase Micro Grid System Using Phase Locked loop. (experimental)

Raj Prakash Korapati

2016

  1.  

Investigation of Switching Transients in Vacuum Circuit Breaker for Synchronous Condenser.

Arghya Jana

2016

  1.  

Control of Single Inductor Based Dual Output/Input Boost DC-DC Converter for Solar PV Applications. (simulation)

Dipankar Biswas

2015

  1.  

Operation and Closed Loop Control of Single-Phase Micro Grid System Using Phase Locked loop. (simulation)

Raj Prakash Korapati

2015

  1.  

Solar PV and Battery Storage Integration Using a Three-Level NPC Grid-Connected Inverter.

Arghya Jana

2015

  1.  

Performance Enhancement of Grid Synchronization in Single Phase Power Converter. (experimental)

Ramachandrarao Pydi

2015

  1.  

Investigation of Various PWM Techniques for Three-Phase Three-Level Inverter. (experimental)

Peruka Vamshi

2015

  1.  

Control of Three Phase Self-Exited Induction Generator – Matrix Converter System Feeding Stand Alone A.C Loads. (experimental)

Devedera Varma Borru

2015

  1.  

Control of Self-Excited Induction Generator Converter System Feeding Constant DC Voltage Applications. (experimental)

K. Ravi Ratna Roja

2015

  1.  

Performance Enhancement of Grid Synchronization in Single Phase Power Converter. (simulation)

Ramachandrarao Pydi

2014

  1.  

Investigation of Various PWM Techniques for Three-Phase Three-Level Inverter. (simulation)

Peruka Vamshi

2014

  1.  

Control of Three Phase Self-Exited Induction Generator – Matrix Converter System Feeding Stand Alone A.C Loads. (simulation)

Devedera Varma Borru

2014

  1.  

Control of Self-Excited Induction Generator Converter System Feeding Constant DC Voltage Applications. (simulation)

K. Ravi Ratna Roja

2014

  1.  

A Wind Driven Self-Excited Induction Generator Supplying Isolated AC loads. (experimental)

Kenguru Manjunath

2014

  1.  

Self-Excitation and Control of a Standalone Wind Power Generation system. (experimental)

Malle Lingamaiah

 

2014

  1.  

Control of Variable Speed Induction Generators Supplying DC loads.(experimental)

Ponukumati Praveenkumar

2014

  1.  

A Wind Driven Self-Excited Induction Generator Supplying Isolated AC loads. (simulation)

Kenguru Manjunath

2013

  1.  

Self-Excitation and Control of a Standalone Wind Power Generation system. (simulation)

Malle Lingamaiah

2013

  1.  

Control of Variable Speed Induction Generators Supplying DC loads. (simulation)

Ponukumati Praveenkumar

2013

  1.  

Operation and Control of Three-Phase Self-Excited Induction Generator Connected to the Three-Phase grid.(experimental)

S.Sunil Nayak

2013

  1.  

DSP Based Voltage and Frequency Control of Self-Excited Induction generators.(experimental)

V. Praveesh

2013

  1.  

Experimental Investigation and Control of Wind-Driven SEIGs Feeding Stand Alone DC loads.(experimental)

Prasad Chengi

2013

  1.  

Operation and Control of Three-Phase Self-Excited Induction Generator Connected to the Single Phase grid.(simulation)

S.Sunil Nayak

2012

  1.  

Voltage and Frequency Control of SEIGs.(simulation)

V. Praveesh

2012

  1.  

Control of Wind-Driven SEIGs Feeding Stand Alone DC Loads.(simulation)

Prasad Chengi

2012

  1.  

High-Efficiency Voltage-Clamped DC-DC Converter With Reduced Reverse- Recovery Current and Switch-Voltage Stress

Ravikiran Vasireddy

2012

  1.  

Control of Three-Phase SEIGS Supplying DC Loads Through Single-Phase AC Boost Rectifier.

Pusarla Naveen

2012

  1.  

Abc-Dq Modelling and Control of Wind Driven Self Excited Induction Generator Feeding Stand Alone Ac and Dc Loads.(experimental)

Enaganti Raj Kumar

2012

  1.  

Dq-Modelling and Control of Self-Excited Induction Generator-Converter Systems for Battery Charging Application.

Mahendhar Rageeru

2012

  1.  

An Excitation Scheme for a Stand-Alone Three-Phase Induction Generator Supplying Single Phase Loads

Ravikiran Vasireddy

2011

  1.  

Single Phasing Operation of SEIGs

Pusarla Naveen

2011

  1.  

Abc-Dq Modelling and Control of Wind Driven Self Excited Induction Generator Feeding Stand Alone Ac and Dc Loads.(simulation)

Enaganti Raj Kumar

2011

  1.  

Hysteresis Controller for SEIG-PWM Converter Systems for Battery Charging Applications.

Mahendhar Rageeru

2011

  1.  

DSP Based Control of Matrix Converter for the Operation of Wind- Driven PMSG.(experimental)

S. Ranjith Kumar

2011

  1.  

Unity Power Factor Isolated Three Phase Rectifier With Split DC Bus Based on the Scott Transformer.(experimental)

J. Tukaram

2011

  1.  

Investigation of Various Modulation and Switching Techniques for Single- Phase Matrix converter.(experimental)

Sravan Kumar Velisela

2011

  1.  

Control Strategies for Three Phase Matrix Converter for the Operation of Wind- Driven PMSG.(simulation)

S. Ranjith Kumar

2010

  1.  

Unity Power Factor Isolated Three Phase Rectifier With Split DC Bus Based on the Scott Transformer.(simulation)

J. Tukaram

2010

  1.  

Investigation of Various Modulation and Switching Techniques for Single- Phase Matrix converter.(simulation)

Sravan Kumar Velisela

2010

  1.  

Continuous Conduction Mode Operation of Three- Phase Single- Switch Boost Rectifier With Constant Load Voltage.

Kartikeyan. T

2010

  1.  

Mixed Mode Operation of Boost Rectifier for Wide Range of Load variations.(experimental)

G. Veeresh Kumar

2010

  1.  

Control of Boost Power Converter

Nagaraju Ghantasala

2010

  1.  

A Systematic Approach for the Control of Boost Power Factor Correction Converter.

P. Guru Nagendra

2010

  1.  

Over Modulation Scheme for Induction Motor Drive.

Kartikeyan. T

2009

  1.  

Mixed Mode Operation of Boost Rectifier for Wide Range of Load variations.(simulation)

G. Veeresh Kumar

2009

  1.  

Model Predictive Control of Multi Variable Four Tank System.

Nagaraju Ghantasala

2009

  1.  

Investigation of PWM Current Control Schemes for Single Phase Power Factor Correction Boost Converter.

P. Guru Nagendra

2009

  1.  

Design and Development of Solar Powered Boost Inverter.

Elizwa Laiju

2009

  1.  

Modelling, Analysis, design and Implementation of Wound Rotor Induction Motor Drive.

S R Prasad

Tummalapalli

2009

  1.  

Automatic Classification of Power Quality Issues.

Elizwa Laiju

2008

  1.  

Modelling, Analysis and Design of High Chopper Frequency Drive for Wound Rotor Induction Motor With a Resistively Loaded Rotor Chopper

S R Prasad Tummalapalli

2008

  1.  

Analysis and Design of Single Switch Forward Buck AC-DC Converter for Low Power Battery Charging Applications.

M.Raghupathi Reddy

2008

  1.  

Design and Implementation of a Reduced Order Observer for Inductor Current Estimation in Buck Type Rectifier.(experimental)

P. Nagaraju

2008

  1.  

Design and Development of Energy Efficient Sensor less Direct Torque Controlled Induction Motor Drive.(experimental)

M. Sathish Kumar

2008

  1.  

Analysis, Design and Development of Neural Network Controller for UPS Inverter Applications.

M.Raghupathi Reddy

2007

  1.  

Design of a Reduced Order Observer for Inductor Current Estimation in Buck Type Rectifier.(simulation)

P. Nagaraju

2007

  1.  

Performance Enhancement of Neuro- Fuzzy Based Sensor less Direct Torque Control of an Induction Motor Drive.(simulation)

M. Sathish Kumar

2007

  1.  

Reduction of Ripples and Flux Droops in Sensor less Direct Torque Control of an Induction Motor Drive.

S.Sampath Kumar

2007

  1.  

Rotor Resistance Estimation Technique for Indirect Vector Controlled Induction Motor Drive.

G.R.K. Nagaraju

2007

  1.  

Performance Enhancement of Sensor less Direct Torque Control of an Induction Motor Drive.

S.Sampath Kumar

2006

  1.  

Sensor less Field- Oriented Control for Double- Inverter- Fed Wound- Rotor Induction Motor Drive.

G.R.K. Nagaraju

2006