Dr.-Ing. Ashok Kumar Nallathambi obtained his PhD from the Process and Systems Engineering Department, Otto von Guericke University, Magdeburg, Germany in 2010. From 2010 -2018, he has worked in OvGU and interacted with various European metal companies such as AMAG Casting, Swiss Steel, NOVELIS, ALUNORF, BharatForge, etc. His areas of specialization are thermal stresses in heat treatment of metals, material constitutive modeling, and hot & cold cracks.
He is currently working in the Peridynamic methods for predicting the origination of hot cracks during metal quenching process. He established the Metal Quenching Research Laboratory for conducting experiments on semi-solid aluminum plates under cracking conditions.
| Examination | Board / University | Year | Division/ Grade | Subjects |
|---|---|---|---|---|
| Ph.D | Otto von Guericke University Magdeburg, Germany | 2010 | Faculty of Systems and Process Engineering, (Summa cum laude) | Thermomechanical simulation of direct chill casting process |
| M.Tech | Indian Institute of Technology Madras, Chennai | 2006 | Department of Applied Mechanics | Engineering Mechanics (Solid Mechanics) |
| B.E | Madurai Kamaraj University, PSNA College of Engg. & Tech., Dindigul | 2001 | Department of Mechanical Engineering | Mechanical Engineering |
| Employer | Job Title | From | To | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| National Institute of Technology, Tiruchirappalli | Assistant Professor | June, 2018 | Till date | |||||||||
| Otto von Guericke University Magdeburg, Germany |
|
|
|
|||||||||
| Indian Institute of Technology Madras, Chennai | Project Officer | June, 2006 | February, 2007 | |||||||||
| Anna University, PSY Engineering College, Sivaganga. | Lecturer | September, 2001 | July, 2004 |
| Project Title | Funding Agency | Amount (in Lakhs) | Period | Role |
|---|---|---|---|---|
| Hunting Representative Sensors and Constructing Regression Model Between Engine Sensor Outcomes Using Machine Learning | GTRE-DRDO Bangalore | 19.82 | 2021, February - 2022,August | Co-PI |
| Experimental Investigation of thermal cracking due to rewetting phenomena during metal quenching process | SERB – Science and Engineering Research Board | 30.51 | 2019, December - 2021, December | PI |
| Hot Tearing During Solidification - Hosted Dr.-Ing. Nyein Nyein Linn from Myanmar | FICCI - AIRTF - DST | 3.30 | 2020, February - 2020, July | PI |
| Experimental Investigation of water ejection during metal quenching | NITT – Seed Grant | 5.00 | 2019, December - 2021,December | PI |
| Project Title | Funding Agency | Amount (EUR) | Period |
|---|---|---|---|
| MATLAB Interface for Stress profiles of Continuous casting of Swiss Steel | Swiss Steel Emmenbruecke, Switzerland | 15,000 | 07/2016 - 12/2017 |
| Simulation of direct chill casting process | Amag Casting, Ranshofen, Austria | 25,000 | 09/2012 - 12/2017 |
| MATLAB Interface for Temperature profiles of continuous casting of Swiss Steel | Swiss Steel Emmenbruecke, Switzerland | 15,000 | 7/2013 - 06/2016 |
| Modeling and simulation of the solidification and cooling process of the Hazelett Caster for the development of a temperature control system | Schmolz & Bickenbach Switzerland | 45,000 | 7/2013 - 06/2016 |
| Influence of cooling water quality on quenching of metal plates | AluNorf GmbH Neuss, Germany | 25,000 | 07/2008 -06/2009 |
| Influence of cooling water surface tension on quenching of metal plates | Novelis Neuss, Germany | 25,000 | 11/2007 - 10/2008 |
| Name of the PhD Scholar | Title of PhD Thesis | Role | Year of Award |
|---|---|---|---|
| Abiraham F | Quenching behaviour of Semisolid metals under cracking conditions | Supervisor | Ongoing from Aug.2023 |
| Srinivasa Rao Turaka | Crack initiation and propagation using Peridynamics for thermomechanical processing of metals | Supervisor | Ongoing from March.2022 |
| Jijo Prasad J R | Peridynamic Modelling of hot crack propagation during metal quenching | Supervisor | Ongoing from July.2019 |
| Saravanakumar P | Modeling and experimentation of quench crack in Semi-solid aluminum plates | Supervisor | Ongoing from July.2018 |
| Gaurav A Kulkarni | Local Heat Transfer and Stress Analysis of Direct Chill Casting Process - Micro-Macro Transactions - Volume 34 - ISBN: 978-3-86912-157-4. | Co-Supervisor | 2018 |
| Pavan Kumar Penumakala | Thermomechanical simulation of continuous and semicontinuous casting of metals - Micro-Macro Transactions - Volume 14 - ISBN: 978-3-86912-113- 0. | Co-Supervisor | 2014 |
No. of PG thesis guided - 28
No. of UG project guided - 9
Dr.-Ing. Ashok Kumar Nallathambi
Assistant Professor
Department of Mechanical Engineering
NIT Tiruchirappalli.
Mobile: +91 95003 10739, +91 63835 01906
Email : nashok@nitt.edu, ashok.kumar.nallathambi@gmail.com
Last Modified: August, 2024
